Technical specification: n14 Width across flats 13 3pos 60 V 4pos 30 V Current rating: IEC 61076-2-104 3 A at 40°C Insulation resistance: IEC 60512 >= 100 M Pollution degree: IEC 60664-1 3/2 Degree of protection: IEC 60529 IP 67, in mated condition Temperature range: IEC 60664-1 -30°C ... +85°C Mating cycles: IEC 60512-9a >= 100 Wire cross section: 0,14mm² - 0,34mm² AWG 26 - 22 (REF. 47) Ω Rated voltage: IEC 61076-2-104 Width across flats 12 Max. external cable diameter see table n13,7 4 1 3 2 4 1 4 pos Directive 2002/95/EC RoHS compliant DO NOT ALTER CAD DRAWING BY HAND Index: d 10.08.2011 K.H. Ä4071 Rated volltage and Current rating updated date appd. CuZn Contact plating: Au over Ni in mating area Contact carrier: PA6 GF, UL 94 Cable sealing: NBR O-Ring: Silicone Coupling nut: Die cast, nickel plated Housing: PA6 GF, UL 94 0,4 Nm Conec installation tool: Torque wrench: 36-000200 Insert across flats 13: 36-000220 Pos: Cable-n: SAL - 8 - RSC3 - K 3 4 - 5,5mm SAL - 8 - RSC4 - K 4 4 - 5,5mm Description: 42-00001 42-00003 name Petker 23.11.10 Mickenbecker Recommended torque: Part no: title: dim. in mm drawn 23.11.10 Contact: Installation specification: 3 3 pos THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH Materials: Male connector M8x1, field attachable, axial, spring-type termination dwg no: 42K1A281 R part no: see table