Technical specification: 42 4pos 250 V 5pos 60 V Current rating: IEC 61076-2-101 4 A at 40°C Insulation resistance: IEC 60512 >=100 M Pollution degree: IEC 60664-1 3/2 Degree of protection: IEC 60529 IP 67, in mated condition Temperature range: IEC 60664-1 -30°C ... +85°C Mating cycles: IEC 60512-9a >=100 Wire cross section: AWG18 / max. 0,75 mm² ~28,5 n20 Ω Rated voltage: IEC 61076-2-101 Width across flats 18 n20 max. external cable diameter see table Materials: Housing in angled version is mountable in 90° angular degree positions 4pos / 5pos 5 4 1 Contact: CuZn Contact plating: Nickel, gold plated Contact carrier: PA6, UL 94 Screw connection CuZn / nickel, tin plated Cable seal: Elastomere O-Ring: FKM / NBR Coupling nut: GD-Zn, nickel plated Housing: PA6 GF, UL 94 Installation specification: Directive 2002/95/EC RoHS compliant DO NOT ALTER CAD DRAWING BY HAND 0,6 Nm Conec installation tooling: Torque wrench: 36-000200 Insert across flats 18: 36-000240 Part no: Description: Pos: Cable-n: 43-00096 SAL - 12 - RKWC4 - S / 075 4 4 - 8 mm 43-00098 SAL - 12 - RKWC5 - S / 075 5 4 - 8 mm 2 3 Index: c 01.02.11 dbu Ä3769 Coupling nut modified, spanner flats added, data sheet modified title: dim. in mm date name drawn 19.01.09 Burschik 19.01.09 Schmidt appd. THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH Recommended torque: Female connector M12x1, field attachable, angled, screw connection dwg no: 43K1A835 R part no: see table