BR515L LOW VF SCHOTTKY RECTIFIER VOLTAGE 150 Volts 5 Amperes CURRENT FEATURES 0.083(2.11) 0.075(1.91) 0.155(3.94) 0.130(3.30) • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications in order to optimize board space • Metal to silicon rectifier. majority carrier conduction • Low power loss, high efficiency • High surge capacity • Lead free in comply with EU RoHS 2011/65/EU directives • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.185(4.70) 0.160(4.06) MECHANICAL DATA • Case : JEDEC DO-214AA molded plastic • Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity : Color band denotes cathode end • Standard packaging : 12mm tape (EIA-481) • Weight : 0.0032 ounce, 0.092 gram 1 Cathode 0.096(2.44) 0.083(2.13) 0.012(0.305) 0.006(0.152) 0.050(1.27) 0.030(0.76) 0.220(5.59) 0.200(5.08) 2 Anode MAXIMUM RATINGS(TA=25oC unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum Recurrent Peak Reverse Voltage VRRM 150 V Maximum RMS Voltage VRMS 105 V VR 150 V Maximum Average Rectified Output Current I F(AV) 5 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 100 A RJL RJA 15 135 TJ,TSTG -55 to + 150 Maximum DC Blocking Voltage Typical Thermal Resistance (Note 1) (Note 2) Operating Junction Temperature Range And Storage Temperature Range o C/W o C NOTES : 1.Mounted on an FR4 PCB, single-sided copper, with 100cm 2 copper pad area 2.Mounted on an FR4 PCB, single-sided copper, mini pad. April 30,2013-REV.00 PAGE . 1 BR515L o ELECTRICAL CHARACTERISTICS (TA=25 C unless otherwise noted) SYMBOL Breakdown voltage Instantaneous forward voltage Reverse current TEST CONDITIONS VBR I R=0.5mA VF I F=1A I F=3A I F=5A I F=1A I F=3A I F=5A IF, Forward Current (A) - - V - 0.63 0.76 0.81 0.5 0.61 0.67 0.86 - V V A VR=150V TA=25oC TA=125oC - 2 15 - A mA 2 1 0 125 150 TC, Case Temperature (°C) Fig.1 Forward Current Derating Curve 1000 100 10 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 10000 10 TJ = 150°C IF, Forward Current (A) IR, Reverse Current (μA) 150 - 3 100 UNIT 0.5 4 75 MAX. - 5 50 TA=125oC TYP. TA=25oC IR 25 TA=25oC MIN. VR=105V 6 0 TA=25oC CJ, Junction Capacitance (pF) PARAMETER 1000 TJ = 125°C 100 10 TJ = 75°C 1 0.1 TJ = 25°C 0.01 10 20 30 40 50 60 70 80 90 100 TJ = 150°C 1 TJ = 125°C 0.1 TJ = 25°C 0.01 0 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics April 30,2013-REV.00 TJ = 75°C 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics PAGE . 2 BR515L MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.5K per 7" plastic Reel April 30,2013-REV.00 PAGE . 3 BR515L Part No_packing code_Version BR515L_R1_00001 BR515L_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 30,2013-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 BR515L Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 30,2013-REV.00 PAGE . 5