SVM1045V2 LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volts CURRENT 10 Amperes 0.172(4.35) 0.167(4.25) FEATURES • Ideal for automated placement • Low f orward voltage drop, low power los ses • Low thermal resistance • Ultra thin profile package for space constrained utilization 0.014(0.35) 0.009(0.25) 0.048(1.20) 0.039(1.00) • High efficiency Operation 0.243(6.15) 0.238(6.05) • Package suitable for automated handling 0.262(6.65) 0.250(6.35) 0.136(3.45) MECHANICAL DATA Case : TO-277, Plastic 0.052(1.30) 0.044(1.10) 0.083(2.10) 0.076(1.95) • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.128(3.25) 0.085(2.15) • Lead free in comply with EU RoHS 2002/95/EC directives. Terminals : Solderable per MIL-STD-750, Method 2026 0.183(4.65) 0.171(4.35) Weight: 0.0037 ounces, 0.1073 grams 0.043(1.10) 0.035(0.90) Marking:SVM1045V2 MAXIMUM RATINGS(T A=25oC unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum Recurrent Peak Reverse Voltage VRRM 45 V Maximum RMS Voltage VRMS 32 V VR 45 V Maximum Average Rectified Output Current I F(AV) 10 A Peak Forward Surge Current:8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 275 A V R = 4 V,1 MH Z CJ 860 pF (Note 2) (Note 1) RJA RJC 110 13 TJ,TSTG -55 to + 150 Maximum DC Blocking Voltage Typ i c a l Junc ti o n c a p a ci t a nce Typical Thermal Resistance ,Junction to Ambient Junction to Case Operating junction temperature range and Storage temperature range o C/W o C NOTES: 2 1.Mounted on an FR4 PCB, s ingle-sided c opper, with 100c m c opper pad area. 2.Mounted on an FR4 PCB, single-sided copper, mini pad. January 03,2013-REV.00 PAGE . 1 SVM1045V2 o ELECTRICAL CHARACTERISTICS (TA=25 C unless otherwise noted) PARAMETER SYMBOL Breakdown voltage Instantaneous forward voltage Reverse current TEST CONDITIONS VBR I R=0.5mA VF I F=1A I F=5A I F=10A I F=1A I F=5A I F=10A TA=25oC TA=25 oC TA=125oC MIN. TYP. MAX. UNIT 45 - - V - 0.28 0.36 0.41 0.18 0.28 0.36 0.44 - V V VR=36V TA=25 oC - 70 - A VR=45V TA=25 oC TA=125oC - 35 220 - A mA IR IF, Forward Current (A) 12 10 8 6 4 2 0 0 25 50 75 100 125 150 CJ, Junction Capacitance (pF) RATING AND CHARACTERISTIC CURVES 10000 1000 100 1 Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance 100 IF, Forward Current (A) IR,Reverse Current (mA) 100 VR, Reverse Bias Voltage (V) TC, Case Temperature (°C) 10 TJ = 150°C 10 TJ = 125°C 1 TJ = 75°C 0.1 TJ = 25°C 100 TJ = 150°C 10 TJ = 125°C 1 TJ = 75°C 0.1 TJ = 25°C 0.01 0.01 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics January 03,2013-REV.00 0 0.1 0.2 0.3 0.4 0.5 0.6 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics PAGE . 2 SVM1045V2 MOUNTING PAD LAYOUT TO-277 Unit：inch(mm) 0.183 (4.65) 0.038 0.046 (0.97) (1.18) ORDER INFORMATION • Packing information T/R - 5K per 13" plastic Reel January 03,2013-REV.00 PAGE . 3 SVM1045V2 Part No_packing code_Version SVM1045V2_R2_00001 SVM1045V2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Packing type means T/R Part No. Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING January 03,2013-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 SVM1045V2 Disclaimer z Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. z Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. z Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. z Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. z Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. z The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. z Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. January 03,2013-REV.00 PAGE . 5