KM Series 15-40W Medical AC-DC PCB-Mount Power Supplies Features u Small size and lightweight u PC Board Mountable u Wide Range Input u Medical Safety Certifications (4kVAC Input - Output) u Class II (No ground needed) u High efficiency Key Market Segments & Applications Specifications Model KMS15 KMD15 KMT15 KMS40KMD40 KMT40 Input Voltage Range - 90-264VAC 47-440Hz or 100-375VDC Inrush Current Limiting A 10 / 20A, cold start, 25°C ambient (115 / 230VAC) Input Current (115 / 230VAC) mA 220 / 118mA 860 / 460mA Recommended External Fuse - 2A slow blow type 3.15A slow blow type Temperature Coefficient - ±0.01%/°C Ripple and Noise (pk-pk) mV 50mV or 1%, whichever is greater Overcurrent Protection - > 105%, hiccup mode, automatic recovery Overvoltage Protection % Yes, Zener diode clamp Hold-up Time (typical) ms 20ms 18ms Enclosure Leakage (240VAC 63Hz) mA 0.055 max 0.08 max (264VAC 63Hz) 0.06 max 0.085 max Operating Temperature °C -25°C to 70°C, derate linearly to 50%(1) load from 50°C to 70°C. Max case temperature 95°C Storage Temperature °C -40°C to 100°C Humidity %RH 20% to 95% RH (non-condensing) Cooling - Convection, over temperature protected ~100°C case temperature Withstand Voltage VAC Input to output: 4kVAC (Reinforced) (2 x MOPPS 3rd Edition) Immunity - EN60601-1-2 Safety Agency Certification - UL60601-1, IEC60601-1, CE Mark, EN60950-1 Conducted EMI - EN55011, EN55022 Class B EN55011, EN55022 Class A Switching Frequency kHz 132kHz Weight g 120 280 Size (LxWxH) in 2.52 x 1.79 x 0.92” 3.5 x 2.5 x 1.06” Mounting & Case - PC board mountable. Plastic resin fiberglass case (UL 94V-0) MTBF hrs 200,000 to 400,000 hours, model dependent Warranty yrs 2 years (1) KM15 derates linearly to 40% load 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 67 Disclaimer: us.tdk-lambda.com/lp/legal.htm KM Series Output Ratings Output Minimum Maximum Output Set Line Load Voltage Current Current Power Accuracy Regulation Regulation (1) Cross Efficiency Model(V) (A) (A)(W)(%) (%) (%)Regulation (%) Single Output KMS15-3P3 V1 3.3V 0A 3.00A 9.9W ±2% 0.5% 1% - 74% KMS40-3P3 V1 3.3V 80mA 8.00A 26.4W ±2% 0.5% 1% - 75% KMS15-5 V1 5V 0A 3.00A 15W ±2% 0.5% 1% - 78% KMS40-5 V1 5V 80mA 8.00A 40W ±2% 0.5% 1% - 79% KMS15-9 V1 9V 0A 1.67A 15W ±2% 0.5% 1% - 79% KMS40-9 V1 9V 44mA 4.44A 40W ±2% 0.5% 1% - 82% KMS15-12 V1 12V 0A 1.25A 15W ±2% 0.5% 1% - 81% KMS40-12 V1 12V 33mA 3.33A 40W ±2% 0.5% 1% - 83% KMS15-15 V1 15V 0A 1.00A 15W ±2% 0.5% 1% - 81% KMS40-15 V1 15V 26.7mA 2.67A 40W ±2% 0.5% 1% - 83% KMS15-24 V1 24V 0A 0.62A 15W ±2% 0.5% 1% - 83% KMS40-24 V1 24V 16.7mA 1.67A 40W ±2% 0.5% 1% - 83% Dual Output KMD15-55 V1 +5V 150mA 1.5A ±2% 0.5% 1% 5% 15W 78% V2 -5V 150mA 1.5A ±2% 0.5% 1% 5% KMD40-55 V1 +5V 400mA 4A ±2% 0.5% 1% 5% 40W 79% V2 -5V 400mA 4A ±2% 0.5% 1% 5% KMD40-512 V1 5V(2) 1250mA 5A ±3% 0.5% 2% 1% 40W 80% V2 12V(2) 312mA 1.25A ±5% 5.0% 6% 7% KMD40-524 V1 5V(2) 1250mA 5A ±3% 0.5% 2% 1% 40W 80% V2 24V(2) 156mA 0.625A ±5% 5.0% 6% 7% KMD15-1212 V1 +12V 62.5mA 0.625A ±2% 0.5% 1% 3% 15W 80% V2 -12V 62.5mA 0.625A ±2% 0.5% 1% 3% KMD40-1212 V1 +12V 166mA 1.66A ±2% 0.5% 1% 5% 40W 83% V2 -12V 166mA 1.66A ±2% 0.5% 1% 5% KMD15-1515 V1 +15V 50mA 0.5A ±2% 0.5% 1% 3% 15W 81% V2 -15V 50mA 0.5A ±2% 0.5% 1% 3% KMD40-1515 V1 +15V 133mA 1.33A ±2% 0.5% 1% 5% 40W 81% V2 -15V 133mA 1.33A ±2% 0.5% 1% 5% Triple Output KMT15-51212 V1 5V(3) 500mA 2A ±2% 0.5% 1% 1% V2 +12V 50mA 0.2A 15W ±3% 2.0% 5% 5% 78% V3 -12V 50mA 0.2A ±3% 2.0% 5% 5% KMT40-51212 V1 5V(3) 1250mA 5A ±3% 0.5% 3% 3% V2 +12V 150mA 0.6A 40W ±5% 5.0% 7% 7% 80% V3 -12V 150mA 0.6A ±5% 5.0% 7% 7% KMT15-51515 V1 5V(3) 500mA 2A ±2% 0.5% 1% 1% V2 +15V 37.5mA 0.15A 15W ±3% 2.0% 5% 5% 78% V3 -15V 37.5mA 0.15A ±3% 2.0% 5% 5% KMT40-51515 V1 5V(3) 1250mA 5A ±3% 0.5% 3% 3% V2 +15V 125mA 0.5A 40W ±5% 5.0% 7% 7% 80% V3 -15V 125mA 0.5A ±5% 5.0% 7% 7% KM15 Outline Drawings (1) Symmetrical loading, from minimum to maximum load (2) Output V1 is isolated from output V2 (3) Output V1 is isolated from outputs V2 & V3 1-800-526-2324 • www.us.tdk-lambda.com/lp/ KM40 Outline Drawings For Additional Information, please visit us.tdk-lambda.com/lp/products/km-series.htm 68 Revision B4: Jan 2013