® CT135/CS135 CotoMOS CT135/CS135 The CT135 and CS135 combine Coto quality and economy in an industry standard 6 pin DIP package. Both the CT135 and the CS135 offer low output capacitance and low leakage current. The CT135 utilizes a thru hole lead configuration, while the CS135 offers a surface mount option when the application requires it. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. CT135/CS135 Features u Contact Form: 1a u Load Voltage: 80V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 100mA Maximum u On-Resistance: 30Ω Maximum u Low Off-State Leakage Current: 10nA Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS135 0.358(9.1)Max. 0.051(1.3) CT135 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 20 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT135/CS135 MAXIMUM RATINGS (Ambient Temperature: 25ºC) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 80V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 100mA Peak Load Current IPeak A 0.3A Output Power Dissipation POut mW 350mW PT mW 400mW V Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms I/O Breakdown Voltage VI/O Operating Temperature TOpr -40ºC ~ +85ºC Storage Temperature TStg -40ºC ~ +100ºC CT135/CS135 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25ºC) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 20 30 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Ω Off-State Leakage Current ILeak VL=80V nA Output Capacitance COut VL=0V, f=1MHz pF 6.0 ms 0.02 0.1 ms 0.05 1.0 10 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O Ω f=1MHz pF 109 1.3 Environmental Ratings: Operating Temp: -40°C to +85° C; Storage Temp: –40 to +100 C. All electrical parameters measured at 25° C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 21