® CT136/CS136 CotoMOS CT136/CS136 The CT136 and CS136 combine Coto quality and economy in an industry standard 6 pin DIP package. Both the CT136 and the CS136 offer low on resistance and high load current. The CT136 utilizes a thru hole lead configuration, while the CS136 offers a surface mount option when the application requires it. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. CT136/CS136 Features u Contact Form: 1a u Load Voltage: 60V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: 2.5A Maximum u On-Resistance: 0.14Ω Maximum u Low Off-State Leakage Current: 1.0μA Maximum u I/O Breakdown Voltage: 1500Vrms Minimum u Suffix - H for I/O Breakdown Voltage: 5000Vrms Minimum DIMENSIONS in Inches (Millimeters) CS136 0.358(9.1)Max. 0.051(1.3) CT136 0.358(9.1)Max. 0.047(1.2) 0.406(10.3)Max. 0.252(6.4) 0.010(0.25) 0.376(9.54)Max. 0.252(6.4) 0.310(7.87)Max. 0.470(1.2) IDENTIFIES PIN #1 0.020(0.5) 0.010(0.25) 0.200(5.08) 0.134(3.4) 0.118(3.0) 0.100(2.54) 0.200(5.08) 0.154(3.9)Max. 0.020(0.5) IDENTIFIES PIN #1 0.162(4.1) 0.020(0.5) 0.100(2.54) TERMINAL IDENTIFICATION 6 5 4 1 2 3 (+) (-) 1: Anode (LED) 2: Cathode (LED) 3: NC 22 | page 4,6: Drain (MOS FET) 5: Source (MOS FET) tel: (401) 943.2686 | fax: (401) 942.0920 CT136/CS136 MAXIMUM RATINGS (Ambient Temperature: 25ºC) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50mA Peak LED Current IFP mA 500mA LED Reverse Voltage VR V 5V Input Power Dissipation Pin mW 75mW VL V 60V (AC peak or DC) OUTPUT SPECIFICATIONS Load Voltage IL A 2.5A Peak Load Current IPeak A 6.0A Output Power Dissipation POut mW 500mW PT mW 550mW I/O Breakdown Voltage VI/O V Operating Temperature TOpr -40ºC ~ +85ºC Storage Temperature TStg -40ºC ~ +100ºC Load Current RELAY SPECIFICATIONS Total Power Dissipation 1500Vrms CT136/CS136 ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25ºC) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF I=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 1.5 3.0 0.09 0.14 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=10mA, IL=Rating Time to flow is within 1 sec. Ω Off-State Leakage Current ILeak IF=0mA, VL=50V μA Output Capacitance COut VL=0V, f=1MHz pF 470 ms 0.6 5.0 ms 0.04 2.0 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=10mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O Ω f=1MHz pF 5*109 1.0 Environmental Ratings: Operating Temp: -40°C to +85° C; Storage Temp: –40 to +100 C. All electrical parameters measured at 25° C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 23