Optoway SPS-2340MWG 1 *********************************************************************************************************************************************************************** SPS-2340MWG / SPS-2340BMWG / SPS-2340AMWG (RoHS Compliant) 40km / 1550 nm / 10G Multirate Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER *********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l l l l l l l l l l l l The SPS-2340MWG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as SONET OC-192 / SDH STM-64, 10G Ethernet 10GBASE-ER/EW and 10G Fibre Channel. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a temperature-stabilized 1550 nm electrical-modulated laser (EML) and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. Support 9.95 Gbps to 11.3Gbps Complaint with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-ER Compliant with OC-192 IR-2 / SDH STM S-64.2b SFF-8472 Digital Diagnostic Function Temperature-stabilized 1550 nm EML Transmitter Distance up to 40 km at SM Fiber AC/AC Coupling according to MSA Single +3.3 V Power Supply Low Power consumption RoHS 6/6 Compliant 0 to 70oC Operating: SPS-2340MWG -5 to 85oC Operating: SPS-2340BMWG -40 to 85oC Operating: SPS-2340AMWG Class 1 Laser International Safety Standard IEC-60825 Compliant LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l SONET OC-192 IR-2 SDH STM S-64.2b SONET OC-192 IR-3 SDH STM S-64.3b ITU-T G.709 l 10GBASE-ER / EW l 40 km 10G Fibre Channel ORDER INFORMATION P/No. Bit Rate (Gb/s) 10G Distance (km) Wavelength (nm) Package Temp. (oC) RoHS Compliant SPS-2340MWG Multirate* 9.95 to 11.3 40 1550 EML SFP+ with DMI 0 to 70 Yes SPS-2340BMWG Multirate* 9.95 to 11.3 40 1550 EML SFP+ with DMI -5 to 85 Yes SPS-2340AMWG Multirate* Yes 9.95 to 11.3 40 1550 EML SFP+ with DMI -40 to 85 *: multirate for SONET OC-192 IR2, OC-192 IR-3, 10GBASE-ER/EW, 10G Fibre Channel, ITU-T G.709, 10GBASE-ER/EW + FEC Absolute Maximum Ratings Parameter Storage Temperature Relative Humidity Symbol Tstg RH Operating Case Temperature Topr Power Supply Voltage Receiver Input Optical Power Vcc Mip Min -40 5 0 -5 -40 -0.5 Max 85 85 70 85 85 3.6 3 Units o C % o C V dBm Notes Non-condensing SPS-2340MWG SPS-2340BMWG SPS-2340AMWG Average power *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 7/1/2011 V3.0 Optoway SPS-2340MWG 2 *********************************************************************************************************************************************************************** Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Relative Humidity Power Supply Current Symbol Vcc Min 3.135 0 -5 -40 5 Topr RH ICC (TX+RX) Typ 3.3 85 320 320 9.95 / 10.3 Data Rate Max 3.465 70 85 85 % 500 650 11.3 Units / Notes V o C / SPS-2340MWG o C / SPS-2340BMWG o C / SPS-2340AMWG Non-condensing o C / SPS-2340MWG o C / SPS-2340A(B)MWG Gb/s 2. Output power is power coupled into a 9/125 µm single-mode fiber. Transmitter Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, Avg λc σλ SMSR ER RIN Min -1 1530 Typ Max +2 1565 1 Units dBm nm nm dB -128 -30 dB/Hz dBm 30 8.2 Notes 2 -20 dB width 2. Output power is power coupled into a 9/125 µm single-mode fiber. Receiver Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter S Sensitivity @ 9.95 to 10.7 Gb/s Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Symbol Sen1 PMAX LOSD LOSA λc Min Typ -1 ---28 1530 ------- Min Max -16 -16 --1565 Units dBm dBm dBm dBm nm Notes 3 Typ Max Units 9.95 / 10.3 100 11.3 Gb/s Ω mVpp Gb/s Ω Internally AC coupled Internally AC coupled Transition: low to high Transition: high to low 3. Averaged power; BER < 10-12 and PRBS 231-1. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage 120 9.95 / 10.3 100 820 11.3 340 850 mVpp 2.0 GND 2.4 GND Vcc+0.3 0.8 Vcc 0.5 V V V V Notes ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 7/1/2011 V3.0 Optoway SPS-2340MWG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN Signal Name 1 2 VEET TX_Fault 3 TX_Disable 4 SDA 5 SDL 6 7 MOD-ABS RS0 8 9 RX_LOS RS1 10 VEER Description PIN Signal Name Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground Description 11 12 VEER RD- Receiver Signal Ground Inverse Receiver Data Out 13 RD+ Receiver Data Out 14 VEER Receiver Signal Ground 15 VCCR Receiver Power – 3.3V±5% 16 17 VCCT VEET Transmitter Power – 3.3V±5% Transmitter Signal Ground 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition PIN 4 PIN 5 PIN 6 Interpretation by Host 4 SDA SCL MOD-ABS Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 7/1/2011 V3.0 Optoway SPS-2340MWG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT (1,17,20) 3 Tx_DISABLE 2 Tx_FAULT 10 KΩ TD + LD Driver 18 TD + Z=50Ω 100Ω TD - 19 TD Z=50Ω Vcc T 4 .7 μH 16 Vcc 3.3V 0.1μF 22 μF 0.1μF SerDes IC 0.1μF Vcc R 15 0.1μF RD - 22 μF 4 .7 μH 12 Protocol IC RD Z=50Ω 100Ω POST Amp RD + 13 RD + Z=50Ω depending on SERDES 10 KΩ LOS Vee R 30KΩ 8 RS1 9 RS0 7 30KΩ MOD_ABS EEPROM SCL SDA LOSS OF SINGAL (10,11,14) TX Rate Select RX Rate Select 6 MODULE DETECT 5 SCL 4 SDA 10 KΩ SFP+ module 10 KΩ 10 KΩ Vcc 3.3V PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 7/1/2011 V3.0 Optoway SPS-2340MWG 5 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 2.0 3.0 Subject Release Date Initial datasheet 1) Add SPS-2340BMWG for extended temperature version 2) Add SPS-2340AMWG for industrial temperature version Extended speed to 11.3 Gb/s 2010/4/1 2010/12/1 2011/7/1 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 7/1/2011 V3.0