PL IA NT Features CO M ■ Servo mount *R oH S ■ Shaft support by front and rear precision ball bearings ■ Non-standard features and specifications available ■ Gangable up to 10 cups 6534 - 7/8 ” (22 mm) Precision Potentiometer Electrical Characteristics1 Product Dimensions Standard Resistance Range....................................................................................1 K to 100 K ohms Total Resistance Tolerance......................................................................................................... ±10 % Independent Linearity ................................................................................................................ ±0.5 % Effective Electrical Angle .......................................................................................................320 ° ±3 ° End Voltage .................................................... 0.1 % maximum (0.25 at 2 K ohms, 0.4 % at 1 K ohm) Output Smoothness ..................................................................................................................... 0.1 % Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level .............................................................................................................750 VAC minimum Power Rating (Voltage Limited By Power Dissipation or 350 VAC, Whichever is Less) +70 °C......................................................................................................................................1 watt +125 °C....................................................................................................................................0 watt Insulation Resistance (500 VDC) ................................................................ 1,000 megohms minimum Resolution ................................................................................................................Essentially infinite 5.08 MIN. (.200) 3.170 + .000/- .008 DIA. (.1248+.0000/-.0003) .25 X 45 ° ± 10 ° (.010) CHAMFER 22.23 (.875) DIA. 19.050 +.000/ - .013 (.75+.0000/-.0005) 1.57 (.062) Environmental Characteristics1 Operating Temperature Range ................................................................................. -40 °C to +125 °C Storage Temperature Range .................................................................................... -65 °C to +125 °C Temperature Coefficient Over Storage Temperature Range ...........................±500 ppm/°C maximum Vibration ........................................................................................................................................15 G Wiper Bounce ........................................................................................... 0.1 millisecond maximum Total Resistance Shift ...............................................................................................±2 % maximum Shock.............................................................................................................................................50 G Wiper Bounce ........................................................................................... 0.1 millisecond maximum Rotational Life (No Load)......................................................................... 25,000,000 shaft revolutions Total Resistance Shift .............................................................................................±10 % maximum Moisture Resistance (MIL-STD-202, Method 103, Condition B) Total Resistance Shift .............................................................................................±10 % maximum IP Rating ....................................................................................................................................... IP 40 1.57 (.062) 1.45 MIN. (.057) 12.70 ± .79 (1/2 ± 1/32) 12.07 (.475) ADD 5.08 FOR EACH ADDITIONAL CUP. (.200) 1 30 ° ±3° 30 ° ±3° 3 2 120 ° MAX. Mechanical Characteristics1 Mechanical Angle ............................................................................................................... Continuous Torque (Starting & Running) ........................................................... 0.18 N-cm (0.25 oz.-in.) maximum Shaft Runout...............................................................................................0.025 mm (0.001 in.) T.I.R. Lateral Runout ..............................................................................................0.05 mm (0.002 in.) T.I.R. Shaft End Play ..............................................................................................0.08 mm (0.003 in.) T.I.R. Shaft Radial Play ..........................................................................................0.08 mm (0.003 in.) T.I.R. Pilot Diameter Runout ................................................................................0.025 mm (0.001 in.) T.I.R. Backlash ....................................................................................................................... 0.1 ° maximum Weight ................................................................................................................................... 18 grams Terminals ...............................................................................................................Side exit turret style Soldering Condition Manual Soldering .................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire 370 °C (700 °F) max. for 3 seconds Wave Soldering ........................................................ 96.5Sn/3.0Ag/0.5Cu solder with no-clean flux 260 °C (500 °F) max. for 5 seconds Wash processes ..................................................................................................Not recommended Marking .................................Manufacturer’s name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code. Ganging ................................................................................................................... 10 cups maximum 15.24 MAX. (.600) TOLERANCES: EXCEPT WHERE NOTED .51 .13 DECIMALS: .XX ± .XXX ± (.02), (.005) ± FRACTIONS: 1/64 MM DIMENSIONS: (IN.) 2 CCW WIPER 3 1 CW CLOCKWISE 1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted. Recommended Part Numbers Part Number Resistance (Ω) 6534S-1-102 6534S-1-202 6534S-1-502 6534S-1-103 6534S-1-203 6534S-1-503 6534S-1-104 1,000 2,000 5,000 10,000 20,000 50,000 100,000 REV. 08/12 *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications