Crimp Housings 3.96 mm Crimp Housing Dimensions : Millimetres Specifications: Current Rating Voltage Rating Maximum Contact Resistance Minimum Insulation Resistance Withstanding Voltage Operating Temperature Range Application Wires : : : : : : : 7 A ac / dc 250 V ac / dc 10 mΩ 1,000 MΩ 1,500 V ac / minute -40°C to +105°C 18 to 22 AWG Material and Finish Insulator Insulator Colour Contact Finish : Nylon 66 : White : Brass : Tin plated www.element14.com www.farnell.com www.newark.com Page <1> 23/06/12 V1.1 Crimp Housings Accessories - Crimp Pin Sections : A -A Sections : B - B Dimensions : Millimetres Specifications: Current Rating Voltage Rating Maximum Contact Resistance Minimum Insulation Resistance Withstanding Voltage Temperature Range Application Wires : : : : : : : 7 A ac / dc 250 V ac / dc 20 mΩ 1,000 MΩ 1,500 V ac / minute -25°C to +125°C 18 to 22 AWG Material Contact Tin Plated : Phosphor bronze or brass : 80 to 120 µ inches tin over 20 to 40 µ inches nickel www.element14.com www.farnell.com www.newark.com Page <2> 23/06/12 V1.1 Crimp Housings Specification Table Type Number of Positions A B Part Number Crimp Housing, 3.96 mm 2 Way 2 3.96 8.22 MC34493 Crimp Housing, 3.96 mm 3 Way 3 7.92 12.18 MC34495 Crimp Housing, 3.96 mm 4 Way 4 11.88 16.14 MC34497 Crimp Housing, 3.96 mm 5 Way 5 15.84 20.1 MC34535 Crimp Housing, 3.96 mm 6 Way 6 19.8 24.06 MC34499 Crimp Housing, 3.96 mm 8 Way 8 27.72 31.98 MC34501 Crimp Housing, 3.96 mm 10 Way 10 35.64 39.9 2114H-10 Crimp Housing, 3.96 mm 12 Way 12 43.56 47.82 MC34537 Crimp Pin, 18 - 22 AWG - - - 2114T Dimensions : Millimetres Part Number Explanation: 3.96 mm Crimp Housing 2214 H Housing - 10 Number of Positions Number of Positions : 02 = 2, 03 = 3, 04 = 4, 05 = 5, 06 = 6, 08 = 8, 10 = 10 and 12 = 12 Positions Accessories - Crimp Pin 2214 T Terminal Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 23/06/12 V1.1