BBS-1046 19" 1U Half Size BareBone HS-4600 Industrial Single Board Computer CoppermineT M 800MHz CPU 64MB SDRAM CD-ROM FDD 120W ATX Power Supply Optional: 2.5" HDD Copyrights This manual is copyrighted and all rights are reserved. Any kind of reproduction in whole or in part without prior written consent from the manufacturer is prohibited. In general, the manufacturer will not be liable for any direct, indirect, special, incidental or consequential damages arising from the use of inability to use the product or documentation, even if advised of the possibility of such damages. The manufacturer reserves the right to change the contents of this manual without prior notice in order to improve the function design, performance, quality and reliability. The author assumes no responsibility for any errors or omissions, which may appear in this manual, nor does it make a commitment to update the information contained herein. Trademarks BOSER is a registered trademark of Boser Technology Co., Ltd. Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc. ISB is a registered trademark of Boser Technology Co., Ltd. All other trademarks, products and or product's name mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners. © Copyright 2001 All Rights Reserved. User Manual edition 1.1, Jun 01, 2001 Contents INTRODUCTION .................................................................................. 2 FEATURES ........................................................................................ 3 SPECIFICATIONS ............................................................................... 4 IMPORTANT NOTES ........................................................................... 7 LAYOUT DIAGRAM............................................................................. 8 INSTALLATION ................................................................................... 9 AWARD BIOS SETUP ....................................................................... 15 Contents ? i Chapter-1 Introduction The BBS-1046 is designed to directly support controllers of PDP display. It is only necessary to connect the VGA connector of the BBS-1046 to the input terminal of the PDP display. The BBS-1046 supports a resolution of up to 1024x768 in 256 colors. It also supports 848x480 in 256 colors. The BBS-1046 is actually one computer because the BBS-1046 has keyboard, mouse, RS-232 serial port, and 100BaseTX LAN. The models provide audio function with connectors for Line Out and MIC In and supports a 2.5” CD-ROM, FDD, and HDD devices. The BBS-1046 can run up to 800MHz clock speed with an Intel processor to achieve greater performance. It uses a 120W power supply and offers excellent heat dissipation with a number of 4cm fans. With these features, the BBS-1046 is a reliable system to count on. 2 Chapter-2 Features 1. Intel® CoppermineTM 800MHz CPU 2. 64MB SDRAM 3. One 0.5” high CD-ROM and FDD Driver 4. One 2.5” HDD (Option) 5. Two RS-232 serial ports 6. PS/2 Keyboard and PS/2 Mouse connector 7. On board 69000 CRT/Panel display controller 8. One Intel® 82559 100 Based LAN 9. On board ESS Solo1 3D Sound 10. Provides DiskOnChip socket 11. Rockwell GPS Modules socket support 12. PC/104 Bus connector 13. One standard PCI Slot 14. Four cooling FANs 15. ATX Power Function support 3 Chapter-3 Specifications 1. CPU Socket 370 for Intel® CeleronTM/CoppermineTM 266~800MHz CPU 2. Bus Interface PCI Bus 3. Bus Clock Rate 4. Memory 5. Chipset Two DIMM sockets provide up to 512MB Intel® 82443BX, Intel® 82371 6. I/O Chipset 7. PCI Slot 8. VGA 100MHz SMC 37C669 One standard PCI Slot 69000 with 2MB memory support CRT/Panel display up to 848x480x16,777,216 colors 640x480x16,777,216 colors 800x600x65,535 colors 1024x768x65,535 colors 1280x1024x256 colors 9. IDE One IDE disk drives speeds support DMA33 transfer rate up to 33.3MB/sec (option) 10. Floppy Supports one floppy disk drives 11. Parallel Port 12. LAN 4 ® Supports SPP/ECP/EPP (option) Intel 82559 100 Based LAN 13. Sound ESS Solo1 3D Sound 14. Serial Port Three RS-232 and one RS-232/422/485 serial ports include 16C550 UART with 16byte FIFO (option) 15. PC/104 16. GPS 17. IR PC/104 connector for 16byte FIFO Supports one Rockwell GPS Module socket One IrDA TX/RX header 18. USB Supports two USB ports 19. Digital I/O 20. TV Out 8bit Digital I/O (Option) Supports PAL or NTSC system (Option) 21. Keyboard/Mouse 8pin connector supports standard PC/AT Keyboard and PS/2 Mouse 22. DiskOnChip Socket for DiskOnChip and memory size up to 144MB 23. BIOS Award Y2K PnP Flash BIOS 24. Watch-Dog Timer Set 1, 2, 10, 20, 110, 220 seconds activity trigger with Reset or NMI 25. CMOS DS12C887 or equivalent device 26. Power Supply Supports ATX Power Function or DC to DC Power Supply (BPW-8210, BPW-8410) AC Input 85~264VAC, 47Hz to 63Hz 27. Maximum Power Consumption 28. Operating Temperature +5V@6A +12V@100mA 0~55 5 29. Storage Temperature 30. FAN -20 ~ +70 Four cooling FANs 31. CPU Temperature Alarm Beeping alarm when CPU’s temperature over heating limited 32. CPU Temperature Monitor 33. Dimension 34. Weight 6 LM75 or equivalent device 430.5x201.2x44.2 mm 5.5Kg Chapter-4 Important Notes 1. Please read the user’s manual and keep it in a safe place for future use. 2. Operate as you do with a regular computer. 3. Keep the system away from water or high moisture. 4. Check if any item in the package is missing. It should include ?? One BBS-1046 unit ?? User’s manual ?? One CD containing the software drivers ?? One power cord ?? A bracket for BBS-1046 ?? One set of screws 5. Use anti-static protection devices. 6. For any problem, do not disassemble the system. Doing so may cancel the free after-sales service. 7 Chapter-5 Layout Diagram BBS-1046 can directly support networking and multimedia connections. Use the connectors on the front panel accordingly. The power connector at the right uses ATX function. The CD-ROM and FDD devices used are similar to a regular PC. 8 No. Description No. Description No. Description 1 CD-ROM 7 COM 1 13 Mouse 2 FDD 8 COM 2 14 Keyboard 3 LAN Link 9 VGA 15 USB 1 4 LAN Access 10 MIC In 16 USB 2 5 AC (+5) Power 11 Line Out 17 Power Switch 6 RJ-45 12 Line In 18 Power Connector Chapter-6 Installation ??Front Panel Function Connector 1. Connect the Mouse 2. Connect the Keyboard 9 3. Connect the Audio connector to the Microphone as necessary 4. Connect the Audio connector to the Speaker as necessary 5. Use the LAN connector 10 6. Connect the power cable 7. Turn on the Power Switch 8. Insert the CD disc 11 ?? Installation of CPU RAM and DiskOnChip 1. Remove all of screws both sides 2. Remove all of the screws of cover 12 3. Plug CPU and Cooling FAN 4. Assembly RAM and DiskOnChip 13 ?? Installation of Rackmount or Wallmount Kits 1. Assembly M3 screws with Rackmount Kit 2. Assembly M3 screws with Wallmount Kit 14 Chapter-7 AWARD BIOS Setup The BBS-1046 uses Award PCI/ISA BIOS for the system configuration. The Award BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options which could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features. To access AWARD PCI/ISA BIOS Setup program, press <Del> key during memory testing when first power on. The Main Menu will be displayed at this time. 15 4.1 Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to enter the sub-menu. ROM PCI/ISA BIOS (2A69KD2I) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANGEMENT SETUP IDE HDD AUTO DETECTION PCI CONFIGURATION SETUP SAVE & EXIT SETUP LOAD BIOS DEFAULTS EXIT WITHOUT SAVING LOAD SETUP DEFAULTS Esc : Quit F10 : Save & Exit ???? : Select Item (Shift)F2 : Change Color Note that a brief description of each highlighted selection appears at the bottom of the screen. 16 4.2 Standard CMOS Setup The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, please set the HDD mode to LBA mode. Please use the IDE Setup Utility in BIOS SETUP to install the HDD correctly. ROM PCI/ISA BIOS (2A69KD2I) STANDARD CMOS SETUP AWARD SOFTWARE, INC. Data (mm:dd:yy) : Fri, Oct 19 1999 Time (hh:mm:ss) : 00:00:00 Type Size Primary Master ? Auto ( 0Mb) Primary Slave ? Auto ( 0Mb) Secondary Master Auto ( 0Mb) Secondary Slave Auto ( 0Mb) Drive A Drive B : 1.44M , 3.5in. : None LCD&CRT : Auto Halt On ESC : Quit F1 : Help : All, But keyboard CYLS 0 0 0 0 HEAD 0 0 0 0 PRECOMP 0 0 0 0 Base Extended Other Total ???? : Select Item (Shift) F2: Change Color LANDZ 0 0 0 0 Memory Memory Memory Memory SECTOR 0 0 0 0 MODE Auto Auto Auto Auto : 640K : 130048K : 384K : 131072K PU/PD/ + / - : Modify 17 4.3 BIOS Features Setup This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. ROM PCI/ISA BIOS (2A69KD2I) BIOS FEATURES SETUP AWARD SOFTWARE, INC. 18 Virus Warning CPU Internal Cache External Cache CPU L2 Cache ECC Checking : : : : Disabled Enabled Enabled Enabled Quick Power On Self Test Boot From LAN First Boot Sequence Swap Floppy Drive Boot Up Floppy Seek Boot Up NumLock Status Gate A20 Option Typematic Rate Setting Typematic Rate (Chars/Sec) Typematic Delay (Msec) Security Option PS/2 Mouse Function Control PCI/VGA Palette Snoop OS Select For DRAM > 64MB Report No FDD For WIN 95 : : : : : : : : : : : : : : : Disabled Disabled A,C,SCSI Disabled Enabled On Fast Disabled 6 250 Setup Enabled Disabled Non-OS2 Yes Video BIOS C8000-CBFFF CC000-CFFF D0000-D3FFF D4000-D7FFF D8000-DBFFF DC000-DFFFF ESC F1 F5 G6 G7 Shadow Shadow Shadow Shadow Shadow Shadow Shadow : : : : : : : Enabled Disabled Disabled Disabled Disabled Disabled Disabled : Quit ????: Select Item : Help PU/PD/+/-: Modify : Old Values (Shift) F2 : Color : Load BIOS Defaults : Load Setup Defaults 4.4 Chipset Features Setup This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses. It must be stated that these items should never be altered. The default settings have been chosen because they provide the best operating conditions for your system. You might consider and make any changes only if you discover that the data has been lost while using your system. ROM PCI/ISA BIOS (2A69KD2I) CHIPSET FEATURES SETUP AWARD SOFTWARE, INC. Auto Configuration EDO DRAM Speed Selection EDO CASx# MA Wait State EDO RASx# Wait State SDRAM RAS to CAS Delay SDRAM RAS Precharge Time SDRAM CAS Latency Time SDRAM Precharge Control DRAM Data Integrity Mode System BIOS Cacheable Video BIOS Cacheable Video RAM Cacheable 8 bit I/O Recovery Time 16 bit I/O Recovery Time Memory Hole At 16M-16M Passive Release Delayed Transaction AGP Aperture Size(MB) : : : : : : : : : : : : : : : : : : Enabled 60ns 2 2 3 3 3 Disabled Non-ECC Enabled Enabled Enabled 1 1 Disabled Enabled Disabled 64 Power-Supply Type Auto Detect DIMM/PCI Clk Spread Spectrum ESC F1 F5 F6 F7 : : : Auto Enabled Disabled : Quit ????: Select Item : Help PU/PD/+/-: Modify : Old Values (Shift) F2 : Color : Load BIOS Defaults : Load Setup Defaults 19 4.5 Integrated Peripherals The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship which is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks. PIO means Programmed Input /Output. Rather than having the BIOS issue a series of commands to affect the transfer to or from the disk drive, PIO allows the BIOS to tell the controller what it wants and then let the controller and the CPU perform the complete task by them. This is much simpler and more efficient (also faster). ROM PCI/ISA BIOS (2A69KD2I) INTEGRATED PERIPHERALS AWARD SOFTWARE, INC. IDE HDD Block Mode IDE Primary Master PIO IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO IDE Primary Master UDMA IDE Primary Slave UDMA IDE Secondary Master UDMA IDE Secondary Slave UDMA On-chip Primary PCI IDE On-chip Secondary PCI IDE USB Keyboard Support Init Display First KBC input clock Onboard FDC Controller Onboard Serial Port 1 Onboard Serial Port 2 UART Mode Select 20 : : : : : : : : : : : : : : : : : : Enabled Auto Auto Auto Auto Auto Auto Auto Auto Enabled Enabled Disabled PCI Slot 8MHz Enabled 3F8/IRQ4 2F8/IRQ3 Normal Onboard Parallel Port Parallel Port Mode : 378/IRQ7 : SPP Onboard Serial Port 3 Serial Part 3 Use IRQ Onboard Serial Port 4 Serial Port 4 Use IRQ LCD Panel Type : : : : : 3E8 IRQ3 2E8 IRQ3 Panel 5 Panel# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Panel Type 1024*768 Dual Scan STN Color Panel 128*1024 TFT Color Panel 640*480 Dual Scan STN Color Panel 800*600 Dual Scan STN Color Panel 640*480 Sharp TFT Color Panel 640*480 18-bit TFT Color Panel 1024*768 TFT Color Panel 800*600 TFT Color Panel 800*600 TFT Color Panel (Large BIOS ONLY) 800*600 TFT Color Panel (Large BIOS ONLY) 800*600 Dual Scan STN Color Panel (Large BIOS ONLY) 800*600 Dual Scan STN Color Panel (Large BIOS ONLY) 1024*768 TFT Color Panel (Large BIOS ONLY) 1280*1024 Dual Scan STN Color Panel (Large BIOS ONLY) 1024*600 Dual Scan STN Color Panel (Lange BIOS ONLY) 1024*600 TFT Color Panel (Lange BIOS ONLY) 21 4.6 Power Management Setup The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use. ROM PCI/ISA BIOS (2A69KD2I) POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. ACPI function Power Management PM Control by APM Video Off Method Video Off After MODEN Use IRQ Doze Mode Standby Mode Suspend Mode HDD Power Down Throttle Duty Cycle PCI/VGA Act Monitor Power On by Ring IRQ 8 Break Suspend : : : : : : : : : : : Enabled Define Yes V/H SYNC+Blank Standby 3 Disabled Disabled Disabled Disabled 62.5% Disabled Enabled Disabled ** Reload Global Timer Events ** IRQ[3-7,9-15], NMI Primary IDE 0 Primary IDE 1 Secondary IDE 0 Secondary IDE 1 Floppy Disk Serial Port Parallel Port ESC F1 F5 F6 F7 22 : : : : : : : : Disabled Disabled Disabled Disabled Disabled Disabled Enabled Disabled : Quit ????: Select Item : Help PU/PD/+/-: Modify : Old Values (Shift) F2 : Color : Load BIOS Defaults : Load Setup Defaults Chapter-8 About the BBS-1046’s Power Supply ??Introduction The BPW-8310 is a 120W forced-air cooling power supply with 5 outputs, 5V standby and remote ON/OFF switching function. ??Input Specifications * Input Voltage The range of input voltage from 85~264VAC * Input Frequency 63Hz The range of input frequency is from 47Hz to * Input Current The maximum input current is 3A at 115VAC or 1.5A at 230VAC * Inrush Current The inrush current will not exceed 30A at 115VAC input or 60A at 230VAC input, cold start, 25 ??Output Specifications * Load Range At factory, the +5V output is set between 5.08V and 5.13V and all output at 60% rated load, and the other output is checked to be within the accuracy range. The maximum total combined output power on the 3.3V and 5V rails is 70. The max. Load cannot exceed 120W. 23 Output Min. Load Rated Load Max. Load Tolerance +5V 1A 8A 14A 4.9~5.1V +12V 0A 2.5A 6A 11.25~12.75V -12V 0A 0.5A 1A -11.25~-13V +3.3V 0A 8A 12A 3.1~3.5V +5sb 0A 0.75A 4.8~5.2V TB2 PIN Output 1,2,3 +5V 4,5,6,7,8 GND 9,10 +12V 11,12,13 +3.3V 14 -12V TB3 24 PIN Output 1 Power On/Off 2 GND 3 +5Vsb * Ripple and Noise The peak to peak ripple and noise for +5V, 3.3V output are less than 50mV for +5Vsb is 120mV, for +12V is less than 12-mV, for –12V is less than 200mV at rated load and nominal input, which is measured by a 15MHz bandwidth limited oscilloscope and the each output is connected with 0.47uf capacitor * Line Regulation The line regulation for +5V is less than 2%, for +12V is less than +7%~3%, for –12V +8%~-3%, +3.3V is less than 5% while the measuring is done by changing the measured output loading 40% from 60% rated load, and keep other output is at 60% rated load ??General Features * Efficiency The efficiency is higher than 70% while measuring at nominal line and rated load * Hold Up Time The hold up time is longer than 16ms at 115VAC input and rated load * Protection The power supply will generate the hiccup mode to protect itself against short circuit or over load condition, and will return to normal after wrong condition is removed * Power ON/OFF The power supply will be turned on when the power on/off pin be connected to secondary GND ??Environment Specifications * Operating Temperature 0~60 , output power is 100W with 6CFM forced air, 120W with 18CFM forced air * Storage Temperature * Altitude -20 to +85 Will operate properly at any altitude between 0 to 10,000ft 25 ??International Standards Designed to meet the following standards * Safety * EMI * EMS UL 1950, CSA 22.2 No.234, VDE EN 60 950 FCC Class B, EN55022B Level 3 of IEC-801-2 801-4 801-5 ??Mechanical Specifications * Dimensions Dimensions shown in mm as above. Tolerance specified is 0.4mm * Connectors AC Input DC Output Molex 5273-05A withdraw 2pin or equivalent TB2?Molex 5273-14A or equivalent TB3?Molex 5045-03A or equivalent 26 Chapter-9 Mechanical Specifications 27 28