3D2700 - Data Delay Devices, Inc.

3D2700
7-BIT ADJUSTABLE, HIGH B.W.
PASSIVE DELAY LINE
(SERIES 3D2700)
FEATURES






PACKAGE
Delay adjustable in 127 steps
Delay step sizes of 0.5ns to 3ns available
Fast rise time for high frequency applications
I/O reversible
BNC female connectors
Meets or exceeds MIL-D-23859C
FUNCTIONAL DESCRIPTION
PIN DESCRIPTIONS
The 3D2700 device is a single-input, single-output, passive delay line.
IN
Signal Input (BNC)
The signal input (IN) is reproduced at the output (OUT), shifted by a time
OUT Signal Output (BNC)
(TD) which can be adjusted via seven binary-weighted switches. The
value of these switches, multiplied by the device dash number,
determines the device delay (referenced to the delay with all the switches off). The device is offered in 50ohm and 75-ohm impedance versions.
SERIES SPECIFICATIONS








Delay Tolerance:
Minimum Delay
(all switches off):
Impedance:
Ripple in pass-band:
Dielectric breakdown:
Operating temp:
Temperature coeff:
Case dimensions:
DASH NUMBER SPECIFICATIONS
2%
Part
Number
2ns
50Ω or 75Ω
Approx. 0.2dB
100 VDC
-65C to +125C
<100 PPM/C
4.13” x 2.68” x 1.66”
(10.5cm x 6.8cm x 4.2cm)
3D2700-0.5A
3D2700-1A
3D2700-1.5A
3D2700-2A
3D2700-2.5A
3D2700-3A
3D2700-0.5Y
3D2700-1Y
3D2700-1.5Y
3D2700-2Y
3D2700-2.5Y
3D2700-3Y
Delay
Step
(ns)
0.5
1.0
1.5
2.0
2.5
3.0
0.5
1.0
1.5
2.0
2.5
3.0
Delay
Range
(ns)
63.5
127.0
190.5
254.0
317.5
381.0
63.5
127.0
190.5
254.0
317.5
381.0
Impedance
(Ω)
50
50
50
50
50
50
75
75
75
75
75
75
3dB
B.W.
(MHz)
30
28
26
24
22
20
30
28
26
24
22
20
Notes: 3db BW measured at maximum delay
Larger dash numbers are available in
larger form factors. Please contact factory
for details.
2014 Data Delay Devices
Doc #14022
1/5/2015
DATA DELAY DEVICES, INC.
3 Mt. Prospect Ave. Clifton, NJ 07013
1
3D2700
PASSIVE DELAY LINE TEST SPECIFICATIONS
TEST CONDITIONS
INPUT:
Ambient Temperature:
Input Pulse:
Source Impedance:
Rise/Fall Time:
Pulse Width:
Period:
25 C  3 C
High = +0.5V typical
Low = -0.5V typical
50 Max.
3.0 ns Max. (measured
at 10% and 90% levels)
PW IN = 100ns
PERIN = 1000ns
o
o
OUTPUT:
Rload:
Cload:
Threshold:
10M
10pf
50% (Rising & Falling)
NOTE: The above conditions are for test only and do not in any way restrict the operation of the device.
RIN
OUT
PULSE
GENERATOR
IN
DEVICE UNDER
TEST (DUT)
IN
OUT
TRIG
TRIG
50 
RIN = ROUT = ZLINE
OSCILLOSCOP
E
ROUT
Test Setup (Delay Measurements)
OUT
RF
IN R
Coax
IN A
Coax
50-OHM
SIGNAL
DIVIDER
OUT R (HP 35676
-66301)
OUT A
OUT B
IN
Coax
NETWORK
ANALYZER
(HP 3577A)
IN B
IMPEDANCE
MATCHING
NETWORK
IMPEDANCE
MATCHING
NETWORK
Coax
IN
GND
DEVICE
UNDER
TEST
OUT
GND
Test Setup (Frequency Response)
Doc #14022
1/5/2015
DATA DELAY DEVICES, INC.
Tel: 973-773-2299
Fax: 973-773-9672
http://www.datadelay.com
2