74LVC04A HEX BUFFERS WITH OPEN DRAIN OUTPUTS Description Pin Assignments The 74LVC04A provides six independent inverter buffers. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The gates perform the positive Boolean function: Y=A Features • Wide Supply Voltage Range from 1.65V to 5.5V • Sinks or sources 24mA at VCC = 3.3V Applications • CMOS low power consumption • Voltage Level Shifting • IOFF Supports Partial-Power-Down Mode Operation • General Purpose Logic • Inputs or outputs accept up to 5.5V • Power Down Signal Isolation • Inputs can be driven by 3.3 V or 5.5V allowing for voltage • Wide array of products such as: • translation applications. PCs, networking, notebooks, ultrabooks, netbooks ESD Protection Exceeds JESD 22 Computer peripherals, hard drives, CD/DVD ROM 200-V Machine Model (A115-A) TV, DVD, DVR, set top box 2000-V Human Body Model (A114-A) Exceeds 1000-V Charged Device Model (C101C) • Latch-Up Exceeds 250mA per JESD 78, Class II • Range of Package Options SO-14 and TSSOP-14 • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 74LVC04A Document number: DS35258 Rev. 3 - 2 1 of 10 www.diodes.com July 2012 © Diodes Incorporated 74LVC04A Pin Descriptions Pin Number Pin Name 1 1A Description Data Input 2 1Y Data Output 3 2A Data Input 4 2Y Data Output 5 3A Data Input 6 3Y Data Output 7 GND 8 4Y Data Output Ground 9 4A Data Input 10 5Y Data Output 11 5A Data Input 12 6Y Data Output 13 6A Data Input 14 VCC Supply Voltage Logic Diagram 1A 2A 3A 4A 5A 6A 1 2 3 4 5 6 9 8 11 10 13 12 1Y 2Y 3Y 4Y 5Y 6Y Function Table Inputs A Outputs Y H L L H 74LVC04A Document number: DS35258 Rev. 3 - 2 2 of 10 www.diodes.com July 2012 © Diodes Incorporated 74LVC04A Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.) Symbol ESD HBM ESD CDM ESD MM Description Rating Unit Human Body Model ESD Protection 2 KV Charged Device Model ESD Protection 1 KV 200 V Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V Vo Voltage applied to output in high impedance or IOFF state Vo Voltage applied to output in high or low state IIK Input Clamp Current IOK Output Clamp Current IO Continuous output current VCC Machine Model ESD Protection -0.5 to 6.5 V -0.3 to VCC +0.5 V VI<0 -50 mA VO<0 -50 mA 50 mA ±100 mA Operating Junction Temperature -40 to +150 °C TSTG Storage Temperature -65 to +150 °C PTOT Total Power Dissipation 500 mW Continuous current through Vdd or GND TJ Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.) Symbol VCC VI VO Parameter Input Voltage Output Voltage Δt/ΔV Input transition rise or fall rate TA Operating free-air temperature Notes: Conditions Supply Voltage Min Max Unit 1.65 5.5 V 0 5.5 V Active Mode 0 VCC V VCC= 0V; Power Down Mode 0 5.5 V VCC = 1.65V to 2.7V 20 VCC = 2.7V to 5.5V 10 -40 +125 ns/V °C 5. Unused inputs should be held at VCC or Ground. 74LVC04A Document number: DS35258 Rev. 3 - 2 3 of 10 www.diodes.com July 2012 © Diodes Incorporated 74LVC04A Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Symbol VIH VIL Parameter Test Conditions High-level Input Voltage Low-level input voltage High Level Output Voltage High-level Output Voltage Input Current Power Down IOFF Leakage Current ICC Supply Current ΔICC Additional Supply Current TA = -40°C to +125°C Min 1.65V to 1.95V 0.65 X VCC 0.65 X VCC 2.3V to 2.7V 1.7 1.6 2.7V to 3.6V 2.0 2.0 4.5V to 5.5V 0.7 X VCC 2.0 Max 1.65V to 1.95V 0.35 X VCC 0.35 X VCC 2.3V to 2.7V 0.7 0.7 2.7V to 3.6V 0.8 0.8 4.5V to 5.5V 0.3 X VCC 0.3 X VCC 1.65V to 3.6V VCC – 0.2 IOH = -4mA 1.65V 1.2 IOH = -8mA 2.3V 1.9 2.7V 2.2 Unit VCC – 0.3 V 2.05 3.0V 2.3 2.1 IOH = -24mA 3.0V 2.2 2.0 IOH = 100μA 1.65V to 5.5V 0.2 0.3 IOH = 4mA 1.65V 0.45 0.6 IOH = 8mA 2.3V 0.70 0.85 2.7V 0.40 0.6 3.0V 0.55 0.6 IOH =-24mA 3.0V 0.55 0.6 VI =GND to 5.5V 3.6V ±5 ±20 μA 0 10 20 μA 3.6V 10 2.7V to 3.6V 500 IOH = 12mA II Max V IOH = -12mA VOL Min V IOH = -100μA VOH TA = -40°C to +85°C VCC VI or VO = 0V to 3.6V VI = GND or VCC IO = 0 One input at VCC – 0.6V Other 74LVC04A Document number: DS35258 Rev. 3 - 2 V 4 of 10 www.diodes.com 40 5000 μA μA July 2012 © Diodes Incorporated 74LVC04A Switching Characteristics Symbol Parameter tPD Propagation Delay AN to YN tSK(0) Test Conditions Figure 1 Output Skew Time VCC TA = +25°C Min Typ Max -40°C to +85°C Min Max -40°C to +125°C Min Max 1.65V to1.95V 0.5 4.1 7.5 0.5 8.0 0.5 9.5 2.3V to 2.7V 0.5 3.6 7.0 0.5 7.5 0.5 9.0 2.7V 0.5 3.0 5.3 0.5 5.5 0.5 7.0 3V to 3.6V 0.5 2.5 4.3 0.5 4.5 0.5 6.0 3V to 3.6V 1.0 Unit ns 1.5 ns Operating Characteristics (@TA = +25°C, unless otherwise specified.) Parameter Power dissipation Cpd capacitance per gate CI Input Capacitance Test Conditions VCC = 1.8V VCC = 2.5V VCC = 3.3V VCC = 5V Typ Typ Typ Typ f = 10 MHz 7.0 7.5 8.0 8.6 pF 4 4 4 4 pF VCC Min Vi = VCC – or GND Unit Package Characteristics Symbol Note: Parameter Test Conditions SO-14 θJA Thermal Resistance Junction-to-Ambient TSSOP-14 θJC Thermal Resistance Junction-to-Case TSSOP-14 SO-14 (Note 6) (Note 6) Typ TBD Max Unit o C/W 159 TBD o C/W 25 6. Test condition for SO-14 and TSSOP-14 : Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 74LVC04A Document number: DS35258 Rev. 3 - 2 5 of 10 www.diodes.com July 2012 © Diodes Incorporated 74LVC04A Parameter Measuement Information VCC Inputs VM CL RL ≤2ns VCC/2 30pF 1KΩ VCC ≤2ns VCC/2 30pF 500Ω 3V ≤2.5ns 1.5V 50pF 500Ω VCC ≤2.5ns VCC/2 50pF 500Ω VI tr/tf 1.8V ±0.15V VCC 2.5V ±0.2V 3.3V ±0.3V 5V ±0.5V Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and tPHL are the same as tPD. Figure 1. Load Circuit and Voltage Waveforms 74LVC04A Document number: DS35258 Rev. 3 - 2 6 of 10 www.diodes.com July 2012 © Diodes Incorporated 74LVC04A Ordering Information Device Package Code Packaging (Note 7) Quantity 13” Tape and Reel Part Number Suffix 74LVC04AS14-13 S14 SO-14 2500/Tape & Reel -13 74LVC04AT14-13 T14 TSSOP-14 2500/Tape & Reel -13 Notes: 7. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf Marking Information (1) SO-14, TSSOP-14 Part Number 74LVC04A Document number: DS35258 Rev. 3 - 2 Package 74LVC04AS14 SO-14 74LVC04AT14 TSSOP-14 7 of 10 www.diodes.com July 2012 © Diodes Incorporated 74LVC04A Package Outline Dimensions (All dimensions in mm.) Package Type: SO-14 E H Gauge Plane L θ Detail “A” D 7° (4 x) A2 A e B A1 Detail “A” SO-14 Dim Min Max A 1.47 1.73 A1 0.10 0.25 A2 1.45 Typ B 0.33 0.51 D 8.53 8.74 E 3.80 3.99 e 1.27 Typ H 5.80 6.20 L 0.38 1.27 0° 8° θ All Dimensions in mm 0.25 Package Type: TSSOP-14 B Gauge Plane Seating Plane L F1 a2 Pin# 1 Indent F Detail ‘A’ G K A a1 D TSSOP-14 Dim Min Max a1 7° (4X) a2 8° 0° A 4.9 5.10 B 4.30 4.50 C 1.2 ⎯ D 0.8 1.05 F 1.00 Typ F1 0.45 0.75 G 0.65 Typ K 0.19 0.30 L 6.40 Typ All Dimensions in mm C Detail ‘A’ 74LVC04A Document number: DS35258 Rev. 3 - 2 8 of 10 www.diodes.com July 2012 © Diodes Incorporated 74LVC04A Suggested Pad Layout Package Type: SO-14 X C1 C2 Y Dimensions Value (in mm) X 0.60 Y 1.50 C1 5.4 C2 1.27 Package Type: TSSOP-14 X C1 C2 Dimensions Value (in mm) X 0.45 Y 1.45 C1 5.9 C2 0.65 Y 74LVC04A Document number: DS35258 Rev. 3 - 2 9 of 10 www.diodes.com July 2012 © Diodes Incorporated 74LVC04A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com 74LVC04A Document number: DS35258 Rev. 3 - 2 10 of 10 www.diodes.com July 2012 © Diodes Incorporated