D5V0F1U2LP3 NEW PRODUCT NEW PRODUCT LOW CAPACITANCE UNIDIRECTIONAL TVS DIODE Features Mechanical Data • Ultra-Small, Low Profile Leadless Surface Mount Package (0.6 * • 0.3 * 0.3mm) • • IEC 61000-4-2 (ESD): Air – ±20kV, Contact – ±15kV • 1 Channel of ESD Protection • • Low Channel Input Capacitance of 0.5pF Typical • • Typically Used at High Speed Ports such as USB 3.0, Case: X3-DFN0603-2 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish − Matte Tin over Copper leadframe, solderable per MIL-STD-202, Method 208 • IEEE1394, Serial ATA, DVI, HDMI, PCI • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (Note 3) Weight: 0.0002 grams (approximate) Pin 1 X3-DFN0603-2 Pin 2 Top View Device Schematic Bottom View Ordering Information (Note 4) Product D5V0F1U2LP3-7 Notes: Compliance Standard Marking TK Reel size(inches) 7 Tape width(mm) 8 Quantity per reel 10,000/Tape & Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html Marking Information TK D5V0F1U2LP3 Document number: DS35462 Rev. 3 - 2 TK = Product Type Marking Code Bar Denotes Pin 1 or Cathode Side 1 of 4 www.diodes.com April 2014 © Diodes Incorporated D5V0F1U2LP3 Maximum Ratings (@TA = +25°C, unless otherwise specified.) Symbol IPP Value 1.5 ±15 ±20 VESD_Contact VESD_Air Unit A kV kV Conditions 8/20μs, Per Figure 3 Standard IEC 61000-4-2 Standard IEC 61000-4-2 Thermal Characteristics Characteristic Package Power Dissipation (Note 5) Thermal Resistance, Junction to Ambient (Note 5) Operating and Storage Temperature Range Symbol PD RθJA TJ, TSTG Value 250 500 -65 to +150 Unit mW °C/W °C Electrical Characteristics (@TA = +25°C unless otherwise specified) Characteristic Reverse Working Voltage Reverse Current (Note 6) Symbol Min Typ Max Unit VRWM — — 5.5 V Test Conditions — IR — — 100 nA VR = 5.0V Reverse Breakdown Voltage VBR 6.0 — — V IR = 1mA Reverse Clamping Voltage, Positive Transients (Note 7) VCL — 10 12 V IPP = 1A, tp = 8/20μs RDYN — 0.9 — Ω IR = 1A, tp = 8/20μs — 0.4 0.65 pF VR = 2.5V, f = 1MHz — 0.5 — pF VR = 0V, f = 1MHz Dynamic Resistance Capacitance (Note 8) Notes: CT 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at http://www.diodes.com. 6. Short duration pulse test used to minimize self-heating effect. 7. Clamping voltage value is based on an 8x20µs peak pulse current (Ipp) waveform. 8. Measured from any I/O to GND. 9. For information on the impact of Diodes' USB 2.0 compatible ESD protectors on signal integrity including eye diagram plots, please refer to AN77 at the following URL: http://www.diodes.com/destools/appnote_dnote.html. 250 100 225 Note 5 200 PEAK PULSE DERATING % OF PEAK POWER OR CURRENT PD, POWER DISSIPATION (mW) NEW PRODUCT NEW PRODUCT Characteristic Peak Pulse Current ESD Protection – Contact Discharge ESD Protection – Air Discharge 175 150 125 100 75 50 75 50 25 25 0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (° C) Figure 1 Power Derating Curve D5V0F1U2LP3 Document number: DS35462 Rev. 3 - 2 175 2 of 4 www.diodes.com 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (°C) Figure 2 Pulse Derating Curve April 2014 © Diodes Incorporated Half Value Ipp/2 50 0 8x20 Waveform as defined by R.E.A. 20 0 60 40 IF, INSTANTANEOUS FORWARD CURRENT (mA) IPP, PEAK PULSE CURRENT (%Ipp) Peak Value Ipp t, TIME (μs) Figure 3 Pulse Waveform 100 TA = 150°C 10 TA = 125°C TA = 85°C 1 TA = 25°C TA = -55°C 0.1 0.01 300 400 500 600 700 800 900 1000 1100 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Figure 4 Typical Forward Characteristics 0.6 100 f = 1MHz Note 8 CT, TOTAL CAPACITANCE (pF) 0.55 IR, LEAKAGE CURRENT (nA) NEW PRODUCT NEW PRODUCT 100 D5V0F1U2LP3 1000 0.45 TA = 150°C 10 0.4 0.35 T A = 125°C TA = 85°C 0.3 0.25 TA = 25°C TA = -55°C 0.2 0.15 1 0 0.5 0.1 0 1 2 3 4 5 5.5 VR, REVERSE VOLTAGE (V) Figure 5 Typical Reverse Characteristics 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 VR, REVERSE VOLTAGE (V) Figure 6 Total Capacitance vs. Reverse Voltage Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A A1 (2x) D e E b (2x) X3-DFN0603-2 Dim Min Max Typ A 0.27 0.35 0.30 A1 0.00 0.03 0.02 b 0.19 0.29 0.24 D 0.595 0.645 0.62 E 0.295 0.345 0.32 e 0.355 L 0.14 0.24 0.19 All Dimensions in mm L (2x) D5V0F1U2LP3 Document number: DS35462 Rev. 3 - 2 3 of 4 www.diodes.com April 2014 © Diodes Incorporated D5V0F1U2LP3 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. 1 X Value (in mm) 0.355 0.150 0.230 0.610 0.300 G C NEW PRODUCT NEW PRODUCT X Y Dimensions C G X X1 Y IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com D5V0F1U2LP3 Document number: DS35462 Rev. 3 - 2 4 of 4 www.diodes.com April 2014 © Diodes Incorporated