ZRT040 4.01V LOW POWER PRECISION REFERENCE SOURCE Description Pin Assignments The ZRT040 is a monolithic integrated circuit providing a precise stable reference voltage of 4.01V at 500μA. The circuit features a knee current of 150μA and operation over a wide range of temperatures and currents. The ZRT040 is available in a SOT223 package for surface mount applications. This device offers a trim facility whereby the output voltage can be adjusted as shown in the schematic diagram. This facility is used when compensating for system errors or setting the reference output to a particular value. When the trim facility is not used, the pin should be left open circuit. SOT223 TRIM 1 GND 2 4 VR 3 Top View (Pin 4 floating or connected to pin 2) Features • • • • • • • • • Trimmable output Excellent temperature stability Low output noise figure -40 to 85°C operating temperature range 1% initial voltage tolerance No external stabilizing capacitor required in most cases Low slope resistance No derating required at low temperatures SOT223 package Schematic Diagram This circuit will allow the reference to be trimmed over a wide range. The device is specified over a ±5% trim range. ZRT040 Document number: DS33258 Rev. 5 - 2 1 of 5 www.diodes.com February 2011 © Diodes Incorporated ZRT040 4.01V LOW POWER PRECISION REFERENCE SOURCE Absolute Maximum Ratings Parameter Symbol Value Unit 75 mA Reverse Current (Note 1) Operating Temperature: C grade TOMP -40 to +85 °C Storage Temperature TSTG -55 to +150 °C Notes: 1. Above 72°C this figure should be linearly derated to 15mA @ 125°C Power Dissipation (@Tamb = 25°C unless otherwise stated) Package Value Unit SOT223 2 W Temperature Dependent Electrical Characteristics Symbol ΔVR TCVR Grade C -40 to 85°C Typ. Max. Parameter Output voltage change over operating temperature range Output voltage temperature coefficient (see Note B) Unit 7.5 24.0 mV 15.0 50.0 ppm/°C Electrical Characteristics (@Tamb = 25°C unless otherwise stated) Symbol VR VTRIM TCVTRIM Parameter Conditions Min. Typ. Max. Unit Output voltage: 1% tolerance IR = 500 µA 3.97 4.01 4.05 V Output voltage adjustment range RT = 100kΩ Change in TCVR with output adjustment IR Operating current range ton toff Turn-on time Turn-off time enp-p RS ±5 Output voltage noise (over the range 0.1 to 10Hz) Slope resistance (see Note C) ZRT040 Document number: DS33258 Rev. 5 - 2 % 2.5 0.15 ppm/°C 75 mA RL = 1kΩ 40 0.3 µs Peak to peak measurement 50 µV IR = 0.5mA to 5mA 1.1 2 of 5 www.diodes.com 3.0 Ω February 2011 © Diodes Incorporated ZRT040 4.01V LOW POWER PRECISION REFERENCE SOURCE Typical Characteristics (a) Output change with temperature (d) Slope resistance (RS) The absolute maximum difference between the maximum output voltage and the minimum output voltage over the specified temperature range: The slope resistance is defined as: ΔVR=VMAX - VMIN (b) Output temperature coefficient (TCVR) The ratio of the output change with temperature to the specified temperature range expressed in ppm/°C: (e) Line regulation The ratio of change in output voltage to the change in input voltage producing it: ΔT= Full temperature range (c) Operating current (IR) Maximum operating current must be derated as indicated in maximum ratings. ZRT040 Document number: DS33258 Rev. 5 - 2 3 of 5 www.diodes.com February 2011 © Diodes Incorporated ZRT040 4.01V LOW POWER PRECISION REFERENCE SOURCE Ordering Information Device Tol % Operating Temperature Part Mark Reel Size Tape Width Quantity Per Reel ZRT040GC1 1 -40 to +85°C ZRT040C1 7” 12mm 1000 Package Outline Dimensions (All Dimensions in mm) SOT223 DIM A A1 b b2 C D Millimeters Min Max 1.80 0.02 0.10 0.66 0.84 2.90 3.10 0.23 0.33 6.30 6.70 Inches Min Max 0.071 0.0008 0.004 0.026 0.033 0.114 0.122 0.009 0.013 0.248 0.264 DIM e e1 E E1 L - Millimeters Min Max 2.30 BSC 4.60 BSC 6.70 7.30 3.30 3.70 0.90 - Inches Min Max 0.0905 BSC 0.181 BSC 0.264 0.287 0.130 0.146 0.355 - Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches. ZRT040 Document number: DS33258 Rev. 5 - 2 4 of 5 www.diodes.com February 2011 © Diodes Incorporated ZRT040 4.01V LOW POWER PRECISION REFERENCE SOURCE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com ZRT040 Document number: DS33258 Rev. 5 - 2 5 of 5 www.diodes.com February 2011 © Diodes Incorporated