A Product Line of Diodes Incorporated ZR4040-5.0 PRECISION 5.0 VOLT MICROPOWER VOLTAGE REFERENCE Description Pin Assignments The ZR4040-5.0 uses a bandgap circuit design to achieve a precision micropower voltage reference of 5.0 volts. The device is available in a small outline surface mount package, ideal for applications where space saving is important, as well as packages for through hole requirements. SOT23 Package Suffix - F The ZR4040-5.0 design provides a stable voltage without an external capacitor and is stable with capacitive loads. The ZR4040-5.0 is recommended for operation between 60μA and 15mA and so is ideally suited to low power and battery powered applications. (Top View) Pin 1 floating or connected to pin 2 Excellent performance is maintained to an absolute maximum of 25mA, however the rugged design and 20 volt processing allows the reference to withstand transient effects and currents up to 200mA. Superior switching capability allows the device to reach stable operating conditions in only a few microseconds. E-Line, 3 pin, Rev Package Suffix – R OBSOLETE Features • • • • • • • • • Small outline SOT23 package No stabilising capacitor required Typical TC 20ppm/°C Typical slope resistance 0.33Ω 2% and 1% tolerance Automotive temperature range Operating current 60μA to 15mA Transient response,stable in less than 10μs Green molding compound (No Br, Sb) Applications • • • • • • (Bottom View) Pin 3 floating or connected to pin 1 Typical Application Circuit Battery powered and portable equipment Metering and measurement systems Instrumentation Test equipment Data acquisition systems Precision power supplies ZR4040-5.0 Document number: DS32179 Rev. 4 - 2 1 of 5 www.diodes.com June 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZR4040-5.0 Absolute Maximum Ratings (Voltages to GND Unless Otherwise Stated) Parameter Reverse Current Forward Current Operating Temperature Storage Temperature Power Dissipation (TAMB = 25°C) SOT23 Electrical Characteristics Symbol Reverse breakdown voltage Minimum operating current Recommended operating current (*) Average reverse breakdown voltage temperature coefficient (*) Average reverse breakdown voltage temperature coefficient RS (†) Slope resistance ZR Reverse dynamic impedance EN Wideband noise voltage TC TC Unit mA mA °C °C 330 mW (Test conditions: Tamb = 25°C, unless otherwise specified.) Parameter VR IMIN IR Rating 25 25 -55 to 125 -55 to 125 Condition IR = 150µA Min. Typ. Max. Tol. (%) Unit 4.95 5.0 30 5.05 60 15 1 V µA mA 20 100 ppm/°C 40 125 ppm/°C 0.33 1.5 Ω 0.4 1.0 Ω 0.06 -40 to 85°C IR(MIN) to IR(MAX) -40 to 125°C IR(MIN) to IR(MAX) IR = 1mA f = 100Hz IAC = 0.1IR IR = 1mA f = 10Hz to 10kHz 105 µV(rms) Notes: (*) TC = (VR(MAX) – VR(MIN)) x 1000000 VR x (T(MAX) – T(MIN)) Note: VR(MAX) - VR(MIN) is the maximum deviation in reference voltage measured over the full operating temperature range. (†) RS = VR Change (IR(MIN) to IR(MAX)) IR(MAX) – IR(MIN)) . ZR4040-5.0 Document number: DS32179 Rev. 4 - 2 2 of 5 www.diodes.com June 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZR4040-5.0 Typical Characteristics ZR4040-5.0 Document number: DS32179 Rev. 4 - 2 3 of 5 www.diodes.com June 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZR4040-5.0 Ordering Information* Order Reference ZR40401F50TA Tol (%) 1 ZR40402F50TA 2 Notes: SOT23 Device Mark 50M SOT23 50L Package Status (*) Released Not Recommended for New Designs Reel Size (inches) 7 Quantity per reel 3000 Tape Width (mm) 8 7 3000 8 *All ZR4040R50 variants (E-Line) are obsolete. Package Outline Dimensions SOT23 E e e1 b 3 leads L1 D E1 A L A1 Dim. c Millimeters Inches Dim. Millimeters Min. Max. Min. Max. A - 1.12 - 0.044 e1 A1 0.01 0.10 0.0004 0.004 E 2.10 2.64 0.083 0.104 b 0.30 0.50 0.012 0.020 E1 1.20 1.40 0.047 0.055 c 0.085 0.20 0.003 0.008 L 0.25 0.60 0.0098 0.0236 D 2.80 3.04 0.110 0.120 L1 0.45 0.62 0.018 0.024 - - - - - e 0.95 NOM 0.037 NOM Min. Max. Inches 1.90 NOM Min. Max. 0.075 NOM Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches ZR4040-5.0 Document number: DS32179 Rev. 4 - 2 4 of 5 www.diodes.com June 2010 © Diodes Incorporated A Product Line of Diodes Incorporated ZR4040-5.0 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com ZR4040-5.0 Document number: DS32179 Rev. 4 - 2 5 of 5 www.diodes.com June 2010 © Diodes Incorporated