A Product Line of Diodes Incorporated ZXTN25040DFH 40V NPN MEDIUM POWER PLANAR TRANSISTOR IN SOT23 Features and Benefits Mechanical Data • • • • • • • • • • • • • • • BVCEO > 40V IC = 4A Continuous Collector Current Low Saturation Voltage VCE(sat) < 55mV @ 1A RCE(sat) = 35mΩ hFE characterised up to 10A High hFE min 300 @ 1A 1.25W power dissipation 130V forward blocking voltage 6V reverse blocking voltage Complementary part number ZXTP25040DFH “Lead-Free”, RoHS Compliant (Note 1) Halogen and Antimony Free. “Green” Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability • • • Case: SOT23 Case material: Molded Plastic. “Green” Molding Compound (Note 2) UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish; Solderable per MIL-STD-202, Method 208 Weight: 0.008 grams (Approximate) Applications • • • MOSFET gate drivers Power switches Motor control • DC fans • DC-DC converters SOT23 Top View Device Symbol Top View Pin Configuration Ordering Information (Note 3) Product ZXTN25040DFHTA Notes: Marking 1A4 Reel size (inches) 7 Tape width (mm) 8 Quantity per reel 3,000 1. No purposefully added lead. 2. Diodes Inc‘s “Green” Policy can be found on our website at https://www.diodes.com/ 3. Devices with lot number starting from PID0155145 (March 2010) are “Green” products. Marking Information 1A4 ZXTN25040DFH Document number: DS33697 Rev. 2 - 2 1A4 = Product Type Marking Code 1 of 7 www.diodes.com January 2012 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTN25040DFH Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage (Forward Blocking) Collector-Emitter Voltage Emitter-Collector Voltage (Reverse Blocking) Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Base Current (Note 6) Symbol VCBO VCEX VCEO VECO VEBO IC ICM IB Value 130 130 40 6 7 4 10 1 Unit V V V V V A A A Value 0.73 5.84 1.05 8.4 1.25 9.6 1.81 14.5 171 119 100 69 74.95 -55 to +150 Unit Thermal Characteristics @TA = 25°C unless otherwise specified Characteristic Symbol (Note 4) Power Dissipation Linear Derating Factor (Note 5) (Note 6) PD - (Note 7) Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Operating and Storage Temperature Range Notes: (Note 4) (Note 5) (Note 6) (Note 7) (Note 8) RθJA RθJL TJ, TSTG W mW/°C °C/W °C/W °C 4. For a device surface mounted on 15mm X 15mm X 1.6mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 5. For a device surface mounted on 25mm X 25mm X 1.6mm FR4 PCB with high coverage of single sided 2 oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 6. For a device surface mounted on 50mm X 50mm X 1.6mm FR4 PCB with high coverage of single sided 2 oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 7. As note 6 above, measured at t < 5 seconds 8. Thermal resistance from junction to solder-point (at the end of the collector lead). ZXTN25040DFH Document number: DS33697 Rev. 2 - 2 2 of 7 www.diodes.com January 2012 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTN25040DFH Typical Thermal Characteristics 50mmX50mm FR4 2oz Cu 10 Limited IC Collector Current (A) IC Collector Current (A) 1m VCE(sat) Failure may occur in this region 100µ 1 DC 1s 100ms 100m 10ms 1ms Single Pulse T amb=25°C 10m 100m 100µs 1 10 BV(BR)CEO=40V 10µ 1µ 0 VCE Collector-Emitter Voltage (V) Safe Operating Area 80 T amb=25°C 50mmX50mm FR4 2oz Cu 60 D=0.5 40 D=0.2 Single Pulse 20 D=0.05 D=0.1 0 100µ 1m 10m 100m 1 10 20 40 60 80 100 120 140 VCE Collector-Emitter Voltage (V) Safe Operating Area Maximum Power (W) Thermal Resistance (°C/W) 100 BV(BR)CEX=130V T amb=25°C 100 1k Single Pulse T amb=25°C 100 50mmX50mm FR4 2oz Cu 10 1 100µ Pulse Width (s) 1m 10m 100m 1 10 100 1k Pulse Width (s) Transient Thermal Impedance Pulse Power Dissipation Max Power Dissipation (W) 1.4 50mmX50mm FR4 1.2 2oz Cu 1.0 25mmX25mm FR4 2oz Cu 0.8 0.6 0.4 15mmX15mm FR4 1oz Cu 0.2 0.0 0 20 40 60 80 100 120 140 160 Temperature (°C) Derating Curve ZXTN25040DFH Document number: DS33697 Rev. 2 - 2 3 of 7 www.diodes.com January 2012 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTN25040DFH Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS Collector-Base Breakdown Voltage Collector-emitter breakdown voltage (forward blocking) Collector-Emitter Breakdown Voltage (base open) (Note 9) Emitter-Base Breakdown Voltage Emitter-collector breakdown voltage (reverse blocking) Emitter-collector breakdown voltage (base open) Symbol Min Typ Max Unit BVCBO 130 170 - V BVCEX 130 170 - V BVCEO 40 63 - V IC = 10mA BVEBO 7 8.3 - V BVECX 6 7.4 - V IE = 100µA IE = 100µA; RBC < 1kΩ or -0.25V < VBC < 0.25V BVECO 6 7.4 - V IE = 100µA; Collector-base Cut-off Current ICBO - <1 - 50 20 nA µA Collector-emitter Cut-off Current ICEX - - 100 nA Emitter-base Cut-off Current ON CHARACTERISTICS (Note 9) IEBO - <1 50 nA VCB = 100V VCB = 100V, TA = 100°C VCE = 100V; RBE < 1kΩ or -1V < VBE < 0.25V VEB = 5.6V hFE 300 300 30 - 450 450 60 10 900 - - Collector-Emitter Saturation Voltage VCE(sat) - 45 120 135 140 55 210 210 190 mV Base-Emitter Saturation Voltage Base-Emitter On Voltage SMALL SIGNAL CHARACTERISTICS (Note 9) VBE(sat) VBE(on) - 960 840 1050 950 mV mV fT - 190 - MHz Cobo td tr ts tf - 11.7 64 108 428 130 20 - pF ns ns ns ns Static Forward Current Transfer Ratio Transition Frequency Collector Output Capacitance Delay time Rise time Storage time Fall time Notes: Test Condition IC = 100µA IC = 100µA; RBE < 1kΩ or -1V < VBE < 0.25V IC = 10mA, VCE = 2V IC = 1A, VCE = 2V IC = 4A, VCE = 2V IC = 10A, VCE = 2V IC = 1A, IB = 100mA IC = 1A, IB = 10mA IC = 2A, IB = 40mA IC = 4A, IB = 400mA IC = 4A, IB = 400mA IC = 4A, VCE = 2V IC = 50mA, VCE = 10V, f = 100MHz VCB = 10V, f = 1MHz VCC = 10V, IC = 1A, IB1 = IB2 = 10mA 9. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2% ZXTN25040DFH Document number: DS33697 Rev. 2 - 2 4 of 7 www.diodes.com January 2012 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTN25040DFH Typical Electrical Characteristics 0.7 1 Tamb=25°C IC/IB=100 0.5 VCE(SAT) (V) 100m VCE(SAT) (V) IC/IB=10 0.6 IC/IB=50 10m IC/IB=20 IC/IB=10 0.4 150°C 0.3 100°C 25°C 0.2 0.1 -55°C 1m 1m 10m 100m 1 0.0 10m 10 IC Collector Current (A) 1.2 1.0 100°C 0.8 25°C 0.6 -55°C 0.4 0.2 0.0 1m 10m 100m 1 10 IC/IB=10 25°C 0.8 0.6 100°C 150°C 0.4 1m 10m 100m 1 10 IC Collector Current (A) hFE v IC VCE=2V -55°C 1.0 IC Collector Current (A) 1.0 10 1.2 VBE(SAT) (V) Normalised Gain 1.4 825 750 675 600 525 450 375 300 225 150 75 0 Typical Gain (hFE) VCE=2V 150°C 1 VCE(SAT) v IC VCE(SAT) v IC 1.6 100m IC Collector Current (A) VBE(SAT) v IC -55°C 25°C VBE(ON) (V) 0.8 0.6 100°C 0.4 150°C 0.2 1m 10m 100m 1 10 IC Collector Current (A) VBE(ON) v IC ZXTN25040DFH Document number: DS33697 Rev. 2 - 2 5 of 7 www.diodes.com January 2012 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTN25040DFH Package Outline Dimensions E e e1 b 3 leads L1 D E1 A L A1 Dim. Millimeters Inches c Dim. Millimeters Min. Max. Min. Max. A - 1.12 - 0.044 e1 A1 0.01 0.10 0.0004 0.004 E 2.10 2.64 0.083 0.104 b 0.30 0.50 0.012 0.020 E1 1.20 1.40 0.047 0.055 c 0.085 0.20 0.003 0.008 L 0.25 0.60 0.0098 0.0236 D 2.80 3.04 0.110 0.120 L1 0.45 0.62 0.018 0.024 - - - - - e 0.95 NOM Min. 0.037 NOM Max. Inches 1.90 NOM Min. Max. 0.075 NOM Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches Suggested Pad Layout 0.95 0.037 2.0 0.079 0.9 0.035 0.8 0.031 ZXTN25040DFH Document number: DS33697 Rev. 2 - 2 6 of 7 www.diodes.com mm inches January 2012 © Diodes Incorporated A Product Line of Diodes Incorporated ZXTN25040DFH IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com ZXTN25040DFH Document number: DS33697 Rev. 2 - 2 7 of 7 www.diodes.com January 2012 © Diodes Incorporated