74LVC2G04 DUAL INVERTERS Description Pin Assignment The 74LVC2G04 is a dual inverter gate with standard push-pull outputs. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using I OFF. The IOFF circuitry disables the output preventing damaging current 6 1Y 1A 1 5 Vcc GND 2 backflow when the device is powered down. NEW PRODUCT ( Top View ) ( Top View ) 4 2Y 2A 3 1A 1 6 1Y GND 2 5 Vcc 2A 3 4 2Y X2-DFN1410-6 The gate performs the positive Boolean function: SOT26 / 363 YA ( Top View) ( Bottom View ) Features 2A 3 Wide Supply Voltage Range from 1.65V to 5.5V ±24mA Output Drive at 3.0V CMOS Low Power Consumption IOFF Supports Partial-Power-Down Mode Operation Inputs Accept up to 5.5V ESD Protection Tested per JESD 22 Exceeds 200-V Machine Model (A115) Exceeds 2000-V Human Body Model (A114) Exceeds 1000-V Charged Device Model (C101) Latch-Up Exceeds 100mA per JESD 78, Class I DFN1409 package designed as a direct replacement for chip scale packaging. Range of Package Options SOT26, SOT363, X1-DFN1010-6, X2-DFN1010-6, X2-DFN1409-6, and X2-DFN1410-6 Leadless Packages Named per JESD30E Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Notes: 4 2Y 1A 1 6 GND 2A 2 5 Vcc 3 4 2Y 1Y X1-DFN1010-6 GND 2 1A 1 5 Vcc 6 1Y DFN1409 Chip Scale Alternative ( Top View ) 1A 1 GND 2 2A 3 6 1Y 5 Vcc 4 2Y X2-DFN1010-6 Applications Voltage Level Shifting General Purpose Logic Power Down Signal Isolation Wide array of products such as: PCs, Networking, Notebooks, Netbooks, Tablets Computer Peripherals, Hard Drives, SSD, CD/DVD ROM TV, DVD, DVR, Set-Top Box Cell Phones, Personal Navigation / GPS MP3 Players, Cameras, Video Recorders 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 74LVC2G04 Document number: DS35160 Rev. 6 - 2 1 of 13 www.diodes.com March 2015 © Diodes Incorporated 74LVC2G04 Ordering Information 74LVC2G NEW PRODUCT Logic Device XXX -7 Function 74 : Logic Prefix LVC : 1.65 to 5.5 V Logic Family 2G : Two Gates 04 : Package 1-Input Inverter/ Driver Device Package Code Package (Note 4) 74LVC2G04W6-7 W6 SOT26 74LVC2G04DW-7 DW SOT363 74LVC2G04FW5-7 FW5 X1-DFN1010-6 74LVC2G04FW4-7 FW4 X2-DFN1010-6 74LVC2G04FX4-7 FX4 X2-DFN1409-6 Chip Scale Alternative 74LVC2G04FZ4-7 FZ4 X2-DFN1410-6 Notes: 04 Packing -7 : 7” Tape & Reel W6 : SOT26 DW : SOT363 FW5 : X1-DFN1010-6 FW4 : X2-DFN1010-6 FX4 : X2- DFN1409-6 FZ4 : X2- DFN1410-6 7” Tape and Reel (Note 5) Quantity Part Number Suffix Package Size 2.8mm X 2.2 mm X 1.1mm 0.95 mm lead pitch 2.0mm X 2.0mm X 1.1mm 0.65 mm lead pitch 1.0mm X 1.0mm X 0.5mm 0.35 mm pad pitch 1.0mm X 1.0mm X 0.4mm 0.35 mm pad pitch 1.4mm X 0.9mm X 0.4mm 0.5 mm pad pitch 1.4mm X 1.0mm X 0.4mm 0.5 mm pad pitch 3,000/Tape & Reel -7 3,000/Tape & Reel -7 5,000/Tape & Reel -7 5,000/Tape & Reel -7 5,000/Tape & Reel -7 5,000/Tape & Reel -7 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf. Logic Diagram Pin Descriptions Pin Name 1A GND 2A 2Y VCC Pin. 1 2 3 4 5 1Y 6 Function Data Input Ground Data Input Data Output 1A Supply Voltage Data Output 2A 1 6 3 4 1Y 2Y Function Table Inputs A Output Y H L L H 74LVC2G04 Document number: DS35160 Rev. 6 - 2 2 of 13 www.diodes.com March 2015 © Diodes Incorporated 74LVC2G04 Absolute Maximum Ratings (Notes 6 & 7) (@TA = +25°C, unless otherwise specified.) Symbol ESD HBM ESD CDM ESD MM Rating 2 1 200 Unit kV kV V Supply Voltage Range -0.5 to +6.5 V VI Input Voltage Range -0.5 to +6.5 V VO Voltage Applied to Output in High Impedance or IOFF State -0.5 to +6.5 V VO Voltage Applied to Output in High or Low State IIK VCC NEW PRODUCT Description Human Body Model ESD Protection Charged Device Model ESD Protection Machine Model ESD Protection -0.3 to VCC +0.5 V Input Clamp Current VI < 0 -50 mA IOK Output Clamp Current VO < 0 -50 mA IO Continuous Output Current -50 mA ±100 mA Operating Junction Temperature -40 to +150 °C Storage Temperature -65 to +150 °C Continuous Current Through VDD or GND TJ TSTG Note 6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range. Recommended Operating Conditions (Note 8) (@TA = +25°C, unless otherwise specified.) Symbol VCC Operating Voltage Parameter Operating Data Retention Only VCC = 1.65V to 1.95V VIH High-Level Input Voltage VCC = 2.3V to 2.7V VCC = 3V to 3.6V Low-Level Input Voltage VI Input Voltage VO Output Voltage IOH IOL Δt/ΔV TA Note: Operating Free-Air Temperature V 1.5 0.65 X VCC 1.7 2 V 0.35 X VCC VCC = 2.3V to 2.7V 0.7 VCC = 3V to 3.6V 0.8 VCC = 4.5V to 5.5V 0.3 X VCC 0 5.5 V V 0 VCC VCC = 1.65V -4 VCC = 2.3V -8 -16 VCC = 3V Input Transition Rise or Rall Rate Unit V 0.7 X VCC High-Level Output Current Low-Level Output Current Max 5.5 VCC = 1.65V to 1.95V VCC = 4.5V to 5.5 V VIL Min 1.65 -24 VCC = 4.5V -32 VCC = 1.65V 4 VCC = 2.3V 8 16 24 VCC = 4.5V 32 VCC = 1.8V ± 0.15 V, 2.5V ± 0.2V 20 VCC = 3.3V ± 0.3V 10 VCC = 5V ± 0.5V 5 -40 125 VCC = 3V V mA mA ns/V °C 8. Unused inputs should be held at VCC or Ground. 74LVC2G04 Document number: DS35160 Rev. 6 - 2 3 of 13 www.diodes.com March 2015 © Diodes Incorporated 74LVC2G04 Electrical Characteristics Symbol Parameter Test Conditions High-Level Output Voltage VCC – 0.1 VCC – 0.1 IOH = -4mA 1.65V 1.2 0.95 IOH = -8mA 2.3V 1.9 1.7 2.4 1.9 IOH = -16mA 3V NEW PRODUCT VOL 2.3 2.0 4.5V 3.8 3.4 IOL = 100μA 1.65V to 5.5V 0.1 0.1 IOL = 4mA 1.65V 0.45 0.70 IOL = 8mA 2.3V 0.3 0.45 0.4 0.60 IOL = 16mA 3V IOL = 24mA IOL = 32mA Unit V IOH = -32mA IOH = -24mA Low-Level Output Voltage -40°C to +125°C Min Max 1.65V to 5.5V IOH = -100μA VOH -40°C to +85°C Min Max VCC V 0.55 0.80 4.5V 0.55 0.80 0 to 5.5V ±5 ± 20 μA 0 ± 10 ± 20 μA Input Current VI = 5.5V or GND IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current VI = 5.5V or GND IO = 0 1.65V to 5.5V 10 40 μA Additional Supply Current Input at VCC -0.6V 3V to 5.5V 500 5000 μA II ΔICC Package Characteristics (All typical values are at VCC = 3.3V, TA = +25°C.) Symbol Parameter Package Input Capacitance CI Thermal Resistance Junction-to-Ambient θJA Min Typ Max Unit 3.5 pF SOT26 204 SOT363 371 X2-DFN1410-6 430 450 495 X2-DFN1010-6 510 SOT26 52 SOT363 143 190 225 245 250 (Note 9) X2-DFN1409-6 X1-DFN1010-6 X2-DFN1410-6 Thermal Resistance Junction-to-Case θJC Conditions Vcc = 3.3V VI = VCC or GND Typical of all packages (Note 9) X2-DFN1409-6 X1-DFN1010-6 X2-DFN1010-6 Note: °C/W °C/W 9. Test condition for all packages: Device mounted on FR-4 substrate PC board, 2oz copper with minimum recommended pad layout. Switching Characteristics TA = -40°C to +85°C, CL = 30 or 50pF (See Figure 1) Parameter From (Input) TO (OUTPUT) tpd A Y VCC = 1.8V ± 0.15V Min Max VCC = 2.5V ± 0.2V Min Max VCC = 3.3V ± 0.3V Min Max VCC = 5V ± 0.5V Min Max 0.5 1.0 0.5 0.5 8.0 4.4 4.1 3.2 Unit ns TA = -40°C to +125°C, CL = 30 or 50pF (See Figure 1) Parameter tpd From (Input) TO (OUTPUT) A Y 74LVC2G04 Document number: DS35160 Rev. 6 - 2 VCC = 1.8V ± 0.15V Min 0.5 Max 9.5 VCC = 2.5V ± 0.2V Min Max 0.5 5.4 4 of 13 www.diodes.com VCC = 3.3V ± 0.3V Min 0.5 Max 5.5 VCC = 5V ± 0.5V Unit Min Max 0.5 3.8 ns March 2015 © Diodes Incorporated 74LVC2G04 Operating Characteristics TA = +25°C Parameter Power Dissipation Capacitance Cpd Test Conditions VCC = 1.8V Typ VCC = 2.5V Typ VCC = 3.3V Typ VCC= 5V Typ Unit f = 10MHz 17 19 20 21 pF NEW PRODUCT Parameter Measurement Information From Output Under Test C RL L (see Note A) Inputs VCC VM CL ≤2ns VCC/2 30 pF 1 kΩ ≤2ns VCC/2 30 pF 500 Ω 3V ≤2.5ns 1.5 V 50 pF 500 Ω VCC ≤2.5ns VCC/2 50 pF 500 Ω VI tr/tf 1.8V±0.15V VCC 2.5V±0.2V VCC 3.3V±0.3V 5V±0.5V RL tW Vl Vl Input VM Input VM VM 0V VM 0V Voltage Waveform Pulse Duration tPLH tPHL VOH Output VM VM VOL tPHL tPLH VOH Output VM VM VOL Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1 Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and tPHL are the same as tPD. 74LVC2G04 Document number: DS35160 Rev. 6 - 2 5 of 13 www.diodes.com March 2015 © Diodes Incorporated 74LVC2G04 Marking Information (1) SOT26, SOT363 NEW PRODUCT 7 4 7 5 6 XX Y W X 1 Part Number 74LVC2G04W6-7 74LVC2G04DW-7 2 3 XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal Code Package SOT26 SOT363 Identification Code Z2 Z2 (2) X1-DFN1010-6, X2-DFN1010-6, X2-DFN1409-6, X2-DFN1410-6 Part Number 74LVC2G04FW4-7 74LVC2G04FW5-7 74LVC2G04FX4-7 74LVC2G04FZ4-7 74LVC2G04 Document number: DS35160 Rev. 6 - 2 Package X2-DFN1010-6 X1-DFN1010-6 X2-DFN1409-6 X2-DFN1410-6 6 of 13 www.diodes.com Identification Code Z2 W2 X2 Z2 March 2015 © Diodes Incorporated 74LVC2G04 SOT26 Package Outline Dimensions and Suggested Pad Layout Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. NEW PRODUCT A SOT26 Dim Min Max Typ A 0.35 0.50 0.38 B 1.50 1.70 1.60 C 2.70 3.00 2.80 D 0.95 H 2.90 3.10 3.00 J 0.013 0.10 0.05 K 1.00 1.30 1.10 L 0.35 0.55 0.40 M 0.10 0.20 0.15 0° 8° All Dimensions in mm B C H K M J L D C2 Z C2 Dimensions Value (in mm) Z 3.20 G 1.60 X 0.55 Y 0.80 C1 2.40 C2 0.95 C1 G Y X 74LVC2G04 Document number: DS35160 Rev. 6 - 2 7 of 13 www.diodes.com March 2015 © Diodes Incorporated 74LVC2G04 SOT363 Package Outline Dimensions and Suggested Pad Layout Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. NEW PRODUCT A SOT363 Dim Min Max Typ A 0.10 0.30 0.25 B 1.15 1.35 1.30 C 2.00 2.20 2.10 D 0.65 Typ F 0.40 0.45 0.425 H 1.80 2.20 2.15 J 0 0.10 0.05 K 0.90 1.00 1.00 L 0.25 0.40 0.30 M 0.10 0.22 0.11 0° 8° All Dimensions in mm B C H K M J D L F C2 C2 Dimensions Z Z G X Y C1 C2 C1 G Y Value (in mm) 2.5 1.3 0.42 0.6 1.9 0.65 X 74LVC2G04 Document number: DS35160 Rev. 6 - 2 8 of 13 www.diodes.com March 2015 © Diodes Incorporated 74LVC2G04 X1-DFN1010-6 (Type B) Package Outline Dimensions and Suggested Pad Layout Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A1 NEW PRODUCT A Seating Plane X1-DFN1010-6 (Type B) Dim Min Max Typ A - 0.50 0.39 A1 0.04 b 0.12 0.20 0.15 D 0.95 1.050 1.00 E 0.95 1.050 1.00 e 0.35 BSC e1 0.55 BSC L3 0.27 0.30 0.30 L3a 0.32 0.40 0.35 All Dimensions in mm D e L3a L3(5x) e1 E (Pin #1 ID) b X1 C Y(4x) Dimensions Y2 Y3 G G1 Y1 Pin1 74LVC2G04 Document number: DS35160 Rev. 6 - 2 C G G1 X X1 Y Y1 Y2 Y3 Value (in mm) 0.350 0.150 0.150 0.200 0.900 0.500 0.525 0.475 1.150 X 9 of 13 www.diodes.com March 2015 © Diodes Incorporated 74LVC2G04 X2-DFN1010-6 Package Outline Dimensions and Suggested Pad Layout NEW PRODUCT Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A1 A A3 X2-DFN1010-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.14 0.20 0.17 b1 0.05 0.15 0.10 D 0.95 1.05 1.00 E 0.95 1.05 1.00 e –– –– 0.35 L 0.35 0.45 0.40 K 0.15 –– –– Z –– –– 0.065 All Dimensions in mm D (Pin #1 ID) e b1 E K L(6x) b(6x) Z(4x) X1 C Y (6x) Y1 Dimensions Value (in mm) C G X X1 Y Y1 0.350 0.150 0.200 0.900 0.550 1.250 1 G(4x) 74LVC2G04 Document number: DS35160 Rev. 6 - 2 X(6x) 10 of 13 www.diodes.com March 2015 © Diodes Incorporated 74LVC2G04 X2-DFN1409-6 Package Outline Dimensions and Suggested Pad Layout NEW PRODUCT Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A3 A1 A Seating Plane D (Pin #1 ID) e1 Ø(6x) e2 E Z1(4x) X2-DFN1409-6 Dim Min Max Typ A — 0.40 0.39 A1 0 0.05 0.02 A3 — — 0.13 Ø 0.20 0.30 0.25 D 1.35 1.45 1.40 E 0.85 0.95 0.90 e1 — — 0.50 e2 — — 0.50 Z1 — — 0.075 Z2 — — 0.075 All Dimensions in mm Z2(4x) C Dimensions D (6x) Y C1 G1 C C1 D G G1 X Y Value (in mm) 1.000 0.500 0.300 0.200 0.200 0.400 0.150 Pin1 X 74LVC2G04 Document number: DS35160 Rev. 6 - 2 G 11 of 13 www.diodes.com March 2015 © Diodes Incorporated 74LVC2G04 X2-DFN1410-6 Package Outline Dimensions and Suggested Pad Layout NEW PRODUCT Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A1 A3 A Seating Plane D e (Pin #1 ID) L(6x) X2-DFN1410-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.15 0.25 0.20 D 1.35 1.45 1.40 E 0.95 1.05 1.00 e –– –– 0.50 L 0.25 0.35 0.30 Z –– –– 0.10 Z1 0.045 0.105 0.075 All Dimensions in mm E Z1(4x) Z(4x) b(6x) X1 C Y(6x) Dimensions C G X X1 Y Y1 Y1 1 74LVC2G04 Document number: DS35160 Rev. 6 - 2 G(4x) X(6x) 12 of 13 www.diodes.com Value (in mm) 0.500 0.250 0.250 1.250 0.525 1.250 March 2015 © Diodes Incorporated 74LVC2G04 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com 74LVC2G04 Document number: DS35160 Rev. 6 - 2 13 of 13 www.diodes.com March 2015 © Diodes Incorporated