A Product Line of Diodes Incorporated Green FCX789A 25V PNP MEDIUM POWER TRANSISTOR IN SOT89 Features Mechanical Data • • • • • • • • • • • • • • BVCEO > -25V IC = -3A high Continuous Current ICM = -8A Peak Pulse Current Low saturation voltage VCE(sat) < -320mV @ -3A hFE specified up to -8A for high current gain hold up Complementary NPN Type: FCX688B Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability • Case: SOT89 Case material: molded plastic. “Green” molding compound. UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.05 grams (Approximate) SOT89 C E C C B B E Top View Device Symbol Top View Pin Out Ordering Information (Note 4) Product FCX789ATA Notes: Marking 789 Reel size (inches) 7 Tape width (mm) 12 Quantity per reel 1,000 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com. Marking Information 789 FCX789A Datasheet Number: DS33074 Rev. 2 - 2 789 = Product Type Marking Code 1 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FCX789A Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Limit -25 -25 -7 -3 -8 Unit V V V A A Value 1 2 125 62.5 5.31 -55 to +150 Unit Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Air Thermal Resistance, Junction to Leads Operating and Storage Temperature Range Symbol (Note 5) (Note 6) (Note 5) (Note 6) (Note 7) PD RθJA RθJL TJ, TSTG W °C/W °C/W °C ESD Ratings (Note 8) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Notes: Symbol ESD HBM ESD MM Value 4,000 ≥ 400 Unit V V JEDEC Class 3A C 5. For a device surface mounted on 15mm X 15mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured when operating in steady state condition. 6. Same as note (5), except the device is mounted on 40mm X 40mm FR4 PCB. 7. Thermal resistance from junction to solder-point (at the end of collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FCX789A Datasheet Number: DS33074 Rev. 2 - 2 2 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FCX789A 1.0 Thermal Resistance (°C/W) Max Power Dissipation (W) Thermal Characteristics and Derating Information 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125 150 Temperature (°C) 120 100 80 D=0.5 60 40 Single Pulse D=0.2 D=0.05 20 0 100µ D=0.1 1m 10m 100m 1 10 100 1k Pulse Width (s) Transient Thermal Impedance Derating Curve Max Power Dissipation (W) 100 Single Pulse. T amb=25°C 10 1 100µ 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation FCX789A Datasheet Number: DS33074 Rev. 2 - 2 3 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FCX789A Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 9) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current DC current transfer Static ratio (Note 9) Symbol BVCBO BVCEO BVEBO ICBO IEBO Min -25 -25 -7 - Typ. -8.1 <1 <1 Max -100 -100 Unit V V V nA nA hFE 300 230 180 75 500 320 250 120 800 - - - -130 -290 -250 -190 -400 -320 mV Collector-Emitter Saturation Voltage (Note 9) VCE(sat) Base-Emitter Saturation Voltage (Note 9) Base-Emitter Turn-on Voltage (Note 9) VBE(sat) VBE(on) - -0.8 -0.8 -0.9 - V V fT 100 - - MHz Cibo Cobo ton toff - 225 25 35 400 - pF pF - nS Transitional Frequency Input capacitance Output capacitance Switching times Notes: - Test Condition IC = -100µA IC = -10mA IE = -100µA VCB = -15V VEB = -5.6V IC = -10mA, VCE = -2V IC = -1A, VCE = -2V IC = -2A, VCE = -2V IC = -6A, VCE = -2V IC = -1A, IB = -10mA IC = -2A, IB = -20mA IC = -3A, IB = -100mA IC = -1A, IB = -10mA IC = -1A, VCE = -2V IC = -50mA, VCE = -5V f = 50MHz VEB = -0.5V, f = 1MHz, VCB = -10V, f = 1MHz, IC = -500mA, VCC = -10V IB1 = -IB2 = -50mA 9. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤ 2%. FCX789A Datasheet Number: DS33074 Rev. 2 - 2 4 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FCX789A Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.) FCX789A Datasheet Number: DS33074 Rev. 2 - 2 5 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FCX789A Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. D1 0 .20 R0 C 1 SOT89 Dim Min Max A 1.40 1.60 B 0.44 0.62 B1 0.35 0.54 C 0.35 0.44 D 4.40 4.60 D1 1.62 1.83 E 2.29 2.60 e 1.50 Typ H 3.94 4.25 H1 2.63 2.93 L 0.89 1.20 All Dimensions in mm H H E B1 L B e 8° (4X) A D Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X1 X2 (2x) Y1 Y3 Y4 Y2 Y C X (3x) FCX789A Datasheet Number: DS33074 Rev. 2 - 2 Dimensions Value (in mm) X 0.900 X1 1.733 X2 0.416 Y 1.300 Y1 4.600 Y2 1.475 Y3 0.950 Y4 1.125 C 1.500 6 of 7 www.diodes.com December 2012 © Diodes Incorporated A Product Line of Diodes Incorporated FCX789A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com FCX789A Datasheet Number: DS33074 Rev. 2 - 2 7 of 7 www.diodes.com December 2012 © Diodes Incorporated