Polyimide coated PANDA Feature PANDA fiber with heat resistant polyimide coating can be used in wide range of temperature between -60 and +300 deg C. Thin coating enables fiber optic sensor to detect changes in temperature and pressure with high sensitivity. Application Fiber optic sensor in extreme environment Common specifications Concentricity error ≤ 0.5 μm Cladding diameter 125 ± 1 μm (Major diameter) Polarization crosstalk ≤ -25 dB/5m @ each operational wavelength Proof test level ≥ 1% Coating structure Polyimide (Single layer) Coating diameter 145 ± 10 μm Minimum bending radius R30 mm Product list Product Operational Mode field wavelength diameter SM98-PS-Y15 980 nm band SRSM15-PS-Y15 1550 nm band Attenuation 6.6 ± 0.5 μm ≤ 2.5 dB/km @ 980 nm @ 980 nm 9.4 ± 1.0 μm ≤ 2.0 dB/km @ 1550 nm @ 1550 nm Specifications are subject to change without prior notice Cutoff wavelength Beat length 0.87 - 0.95 μm 1.5 - 2.7 mm ≤ 1.44 μm ≤ 4.0 mm Optical Device Sales Engineering Department 1440, Mutsuzaki, Sakura, Chiba 285-8550, Japan Tel: +81 43 484 0982 FAX: +81 43 484 2186 http://www.fujikura.co.jp/ [email protected] B-13D0086-16