ETC HFD7520-212

Fiber Optic Components
156 Mbps Receiver for POF
HFD7520-2xx
FEATURES
●
●
●
●
Designed for POF (Plastic Optical Fiber)
Monolithic structure immune from external noise
Data rates from 4 to 156Mbps
P-ECL voltage conversion output
Note: Unlike normal P-ECL output, output can not
be terminated with 50Ω (see Note 8, page 2)
HFD7520-2xx
Description
Application
The HFD7520-2xx is a monolithic integrated 156Mb/s
Receiver designed for POF (Plastic Optical Fiber) data links.
The high sensitivity and wide dynamic range allows operation
in many applications. High resistance to external noise and
high reliability is ensured by the monolithic chip design.The
output provides P-ECL levels. The plastic SMA housing gives
the user a cost effective module which can be easily mounted
on the PCB. The HFD7520-2xx is designed to work with
Honeywell’s high-speed 650nm LED HFE7020-210.
Plastic optical fiber communication in factory automation,
office machine, home automation and LAN. Data transmission
in locations subject to high electromagnetic noise.
NOTICE
PRELIMINARY DOCUMENTATION
The information contained in this document is preliminary and for reference only. Preliminary means that the product described has not been
or is currently being formally tested. Specifications are subject to change without notice. Reliance on the information contained herein is at
the reader’s own risk.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet (or catalogue)
is for reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance information
is provided in the instructions supplied with each product.
Package Information
Failure to comply with these instructions could
result in death or serious injury.
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop devices,
or in any other application where failure of the product could result
in personal injury.
Failure to comply with these instructions could
result in death or serious injury.
Pinout
Pin
1,2,3,4
Automation and Control Products
1
2
3
4
=
=
=
=
QB (inverted)
GND
Q
Vcc
Outline Dimensions mm (for reference only)
HFD7520-2xx
Fiber Optic Components
156 Mbps Receiver for POF
Absolute Maximum Ratings (TA = 25°C)
Parameters
Symbol
Rating
Supply voltage
Output voltage
Output current
Power dissipation ✝
Vcc
Vo
Ioh
P
–0.5 to +7.0V
–0.5 to Vcc +0.5V
8mA
250mW
Soldering temperature ✦
TSold
230°C for 5 sec.
Operating temperature
TOp
–20°C to +70°C
Storage temperature
TStor
–40°C to +85°C
✝ Derate power dissipation at arate of 1.7mW/ ºC above Ta = 25ºC
✦ at least 1.8mm away from package surface
Electro-Optical Characteristics (TA = 25°C, Vcc = 5.0V)
Parameters
Test Condition
Data rate
Current consumption
High level output voltage
Low level output voltage
Maximum detectable signal level
bi-phase signal, NRZ conversion
Minimum detectable signal level
✶ 4, 5, 6, 7, 8
Rise time
10 to 90%
✶ 4, 5, 8
Fall time
10 to 90%
✶ 4, 5, 8
tf
Pulse width distortion
✶ 4, 5, 6, 8
∆T
Jitter
✶ 4, 5, 6, 8
∆Tj
✶4
✶5
✶6
✶7
✶8
✶ 4, 5, 8
Ioh = 1mA ✶ 4, 5, 8
Iol = –0.5µA ✶ 4, 5, 8
✶ 4, 5, 6, 7, 8
Symbol
Max.
Units
156
40
4.3
3.4
Mbps
mA
V
V
dBm
Pimin
–22
dBm
tr
3
ns
3
ns
3
ns
3
ns
fD
Icco
Voh
Vol
Pimax
Min.
4
3.9
2.9
–2
–3
Typ.
Measured with 156Mbps input signal (Bi-phase signal)
A 3pF capacitor is connected to GND as a capacitive load (including parasitic capacitance such as probes, connectors and evaluation PCB patterns)
An optical input waveform is generated with a Honeywell standard transmitter
A detectable signal level is an average value, measured using a plastic fiber (MH4001 made by Mitsubishi Rayon)
A 3kΩ resistor is externally connected between Q and GND and also between QB and GND
Note
• A bypass capacitor (0.1µF) connected at a position within 2mm from the lead, and a 4.7µF capacitor
is also connected to the power supply line nearby.
• The optical axis of the package lens is exactly aligned with the center axis of the optical plug, and the gap
between the lens surface and the optical reference plane of the plug is 0.1mm.
• If modulated light at 4Mbps or less (including DC light and no light input) is input to HFD7520-2xx,
the high and low levels cannot discerned.
Order Guide
Catalogue Listing
Description
HFD7520-212
156Mb/s Receiver in plastic non conductive SMA-housing
HFD7520-215
156Mb/s Receiver in conductive plastic SMA-housing
Automation and Control Products
HFD7520-2xx
Fiber Optic Components
156 Mbps Receiver for POF
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local
sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell
will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose.
While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the application.
Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable
as of this printing. However, we assume no responsibility for its use.
SALES AND SERVICE
Honeywell serves its customers through a world-wide network of sales offices and distributors.
For application assistance, current specifications, pricing or name of the nearest Authorized Distributor,
contact a nearby sales office or call:
TELEPHONE
Germany
UK
USA & Canada
International
+ 49-89-35 81 33 10
011-44–1698 481481
1-800-367-6786
1-214-470-4271
INTERNET
http://www.honeywell.com/sensing/
e-mail: [email protected]
Specifications may change at anytime and without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we
assume no responsibility for its use. While we provide application assistance, personally, through our literature and through the Honeywell website, it is up to the
customer to determine the suitability of the product in the application. Honeywell reserves the right to make changes in order to improve design and supply the
best products possible.
This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the
customer’s responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on request.
© Honeywell 2002. All rights reserved.
Automation and Control Products
www.honeywell.com/sensing
Honeywell AG
Stuttgarter Straße 5
D-80807 Munich
Germany
100107-EN
Issue 1
11/02
GE09
GLO
Printed in Germany environmentally friendly paper