SENSOR SWITCHES

>> Small size & compact space
>> Increased strength between housing and base
>> High temperature and fire proof
>> Suitable to IC trigger signal
SENSOR SWITCHES
>> Complete replacement of mercury switches
>> Meet environmental protection
>> RoHS compliant
NV1 Series
NV2 Series
Industrial Control
Car Alarm
Vibration
Sensor
Switches
NV3 Series
Building
Building Alarm
Alarm
NV4 Series
Power Saving
TPMS
Bicycle Lighting
NR1 Series
Tablet PC
Roll Ball
Sensor
Switches
NR2 Series
NR3 Series
Earthquake
Detecting
Power Saving
NP1 Series
Optical
Roll Ball
Sensor
Switches
Car Monitor
NP2 Series
Notebook
[email protected]
Car Boots
Lighting
www.greatecs.com
Sensor Switches
NV1 Series
Vibration Switch
Applications:
1. Two Axis Vibration Detecting: Toys, Sporting Shoes
Dimensions/ Operation/ P.C.B. Layout(Unit: mm,Tolerance:±0.25mm)
Installation Position
P.C.B Layout
NV1 - 0A00
Installation Position
P.C.B Layout
NV1 - 0B00
All specifications are restricted to QA test criteria.
DRW: D. L. JIN, CHK: D.F. LEE, APP: H.Z. QIU, DC: 2011-11-14
GENERAL SPECIFICATIONS
Features:
Eletrical Characteristics:
1. Small size & compact space.
2. Terminals gold plated to enhance the life.
3. Special structure; increased strength between
housing and base.
4. All plastic material subject to industrial purpose
meets high temperature and fireproof function
caused by contact oxidized.
5. Suitable to IC trigger signal.
6. Complete replacement of mercury switch and
meet with environmental protection.
1. Contact Rating: 25mA, 24VDC
2. Insulation Resistance:1000M min. At 100 VDC
3. Switching type: Normal Open (NO)
4. Dielectric Strength: 500 VDC min. for 1 minute
5.Capacitance: 5pF max
Bill Of Material:
1. Housing: ZINC Alloy, Tin Plated over NIckel
2. Base: Class-Fiber Polyamide
3. Terminal: Copper Alloy, Gold(3µ”) plated over Nickel
4. Spring: Copper Alloy, NIckel plated
5. Steel Ball: Stainless Steel
[email protected]
Mechanical Characteristics:
1. Temperature Range: Operating: -25°C to +85°C ;
Storage : -40°C to +85°C
2. Pull Force of Terminal: 500 gf for 1 minute
3. Operation Life: 100,000 Cycles
4. Humidity: 95% RH,40°C for 96 hrs.
5.Solder ability : After flux 245±5°C for 5±0.5 seconds
95% coverage
www.greatecs.com
1
Sensor Switches
NV1 Series
Vibration Switch
« NOTE
1. Suggestion Contact Rating: 5 mA.
2. Conductive Rate: To test the conductivity (Switch-on Rate) of one switch individually for100 times,
if the switch conductive 95 times, we call the “conductive rate” is 95%.
3. For the continued product improvement as one of the company policy, specifications may change
or update without notice. The latest information can be obtained through our sales offices.
Normally, all products are supplied under our standard conditions.
« PRECAUTIONS FOR USE
1. The product is used mainly in electronic devices such as automotive devices, visual devices, home
electrical appliances, information devices and communication settings. If the products is intended
to be used for other endurance equipments requiring higher safety and reliability such as life support
system, space and aviations devices, disaster and safety system, it’s necessary to make verification of
conformity or contact us for the details before using.
2. Don’t try to clean the switch with a solvent or similar substance after the soldering process.
3. The switch might be damaged if using the water-soluble flux.
4. Don’t use the switch in the environment with high humidity or other bedewing possibility,
as it may cause leaking among the terminals.
5. It might catch fire if the rating exceeds the specifications. Never use the switch beyond the
rating.
PACKAGE (Minimum Order Quantity: One Bag)
Part Number
1.
NV1-0A00
NV1-0B00
[email protected]
Package
Quantity
Tota
Size
PE Bag
500 pcs
500 pcs
12.7 x 17.8 cm
Inner Box
10 Bags
5,000 pcs
36 x 20 x 9 cm
Carton
3 Boxes
15,000 pcs
36 x 28 x 23 cm
www.greatecs.com
2
Sensor Switches
NV2 Series
Vibration Switch
Applications:
1. Single Axis Vibration Detecting: Step Counter
2. Centrifugal Force Detecting:
Tire Pressure Monitoring System
Elcetric Sawing Machine
Dimensions/ Operation/ P.C.B. Layout (Unit: mm,Tolerance:±0.25mm)
Installation Position
1.5G<A<5.0G
Centrifugal force
Acceleration(A)
NV2 - 0F00
Installation Position
1.5G<A<5.0G
Centrifugal force
Acceleration(A)
NV2 - 0G00
Installation Position
1.5G<A<5.0G
Centrifugal force
Acceleration(A)
P.C.B Layout
All specifications are restricted to QA test criteria.
DRW: D. L. JIN, CHK: D.F. LEE, APP: H.Z. QIU, DC: 2011-11-14
NV2 - 0H00
GENERAL SPECIFICATIONS
Features:
Eletrical Characteristics:
1. Small size & compact space.
2. With high-quality spring inside the housing.
3. Using Insert Molding Technology to increase
strength between base and terminal.
4. All plastic material subject to industrial purpose
meets high temperature and fireproof function.
5. Suitable to IC trigger signal.
6. Complete replacement of mercury switch and meet
with environmental protection.
1. Contact Rating: 25mA, 24VDC
2. Insulation Resistance:1000M min. At 100 VDC
3. Switching type: Normal Open (NO)
4. Dielectric Strength: 500 VDC min. for 1 minute
5.Capacitance: 5pF max
Bill Of Material:
1. Housing: Copper Alloy, Tin or Gold Plated(3µ”)
over NIckel
2. Metal Cover: Copper Alloy, Tin or Gold Plated(3µ”)
over NIckel
3. Isolation Base: Glass-Fiber LCP, UL 94V-0
3. Terminal: Copper Alloy, Gold plated(3µ”) over Nickel
4. Spring: Copper Alloy, Gold plated(3µ”) over NIckel
5. Ball: Stainless steel, Gold Plated(3µ”) over Nickel
[email protected]
Mechanical Characteristics:
1. Temperature Range:
Operating: -25°C to +85°C (Tin Plated)
-40°C to +85°C (Gold Plated)
Storage : -40°C to +85°C (Tin Plated)
-50°C to +150°C (Gold Plated)
2. Pull Force of Terminal: 500 gf for 1 minute
3. Operation Life: 100,000 Cycles (Tin Plated)
1,000,000 Cycles (Gold Plated)
4. Vibration: Per MIL-STD-202F, Method 204D
5. Humidity: 95% RH,40°C for 96 hrs.
6. Solder ability : After flux 230±5°C for 5±0.5 seconds
95% coverage
www.greatecs.com
1
Sensor Switches
NV2 Series
Vibration Switch
« NOTE
1. Suggestion Contact Rating: 5 mA.
2. For the continued product improvement as one of the company policy, specifications may change
or update without notice. The latest information can be obtained through our sales offices. Normally,
all products are supplied under our standard conditions.
« PRECAUTIONS FOR USE
1. The product is used mainly in electronic devices such as automotive devices, visual devices, home
electrical appliances, information devices and communication settings. If the products is intended
to be used for other endurance equipments requiring higher safety and reliability such as life
support system, space and aviations devices, disaster and safety system, it’s necessary to make
verification of conformity or contact us for the details before using.
2. Don’t try to clean the switch with a solvent or similar substance after the soldering Prozess.
3. The switch might be damaged if using the water-soluble flux.
4. The switch might be apart if the so ldering condition over specification.
5. Don’t use the switch in the environment with high humidity or other bedewing possibility,
as it may cause leaking among the terminals.
6. It might catch fire if the rating exceeds the specifications. Never use the switch beyond the Rating.
PACKAGE (Minimum Order Quantity: One Bag)
Part Number
NV2-0F00
1.
Package
Quantity
Total
Size
PE Bag
1,000 pcs
1,000 pcs
12.7 x 17.8 cm
Inner Box
10 Bags
10,000 pcs
36 x 20 x 9 cm
30,000 pcs
36 x 28 x 23 cm
NV2-0G00
NV2-0H00
Carton
[email protected]
3 Boxes
www.greatecs.com
2
Sensor Switches
NV3 Series
Vibration Switch
Applications:
1. Omni-directional vibration detecting: Remote
Controller, Wireless Mouse,etc.,occasions that
request for vibration Power ON function
2. Centrifugal Force Detecting:
Tire Pressure Monitoring System
Elcetric Sawing Machine
Dimensions/ Operation/ P.C.B. Layout (Unit: mm,Tolerance:±0.25mm)
Installation Position
P.C.B Layout
Drawing:
Switch will be ‘’off’’ when product equipped
with this switch is touched in any position
NV3 - 0A00
Installation Position
P.C.B Layout
Drawing:
Switch will be ‘’off’’ when product equipped
with this switch is touched in any position
NV3 - 0B00
All specifications are restricted to QA test criteria.
DRW: D. L. JIN, CHK: D.F. LEE, APP: H.Z. QIU, DC: 2011-11-14
GENERAL SPECIFICATIONS
Features:
Eletrical Characteristics:
1. Small size & compact space.
2. Special structure; increased strengh between housing
and base.
3. Ball are gold plated to enhance the life.
4. All plastic material subject to industrial purpose meets
with high temperature and fireproof function.
5. Suitable to IC trigger signal.
6. Complete replacement of mercury switch and meet with
environmental protection.
1. Contact Rating: 25mA, 24VDC
2. Insulation Resistance:1000MΩ min. At 100 VDC
3. Switching type: Normal Open (NO)
4. Dielectric Strength: 500 VDC min. for 1 minute
5.Capacitance: 5pF max
Bill Of Material:
1. Housing: ZINC Alloy, Tin Plated over NIckel
2. Base: Glass-Fiber Polyamide, UL 94V-0
3. Terminal: Copper Alloy, Gold plated(3µ”) over Nickel
4. Ball: Copper Alloy, Gold Plated(3µ”) over Nickel
[email protected]
Mechanical Characteristics:
1. Temperature Range: Operating: -25°C to +85°C ;
Storage : -40°C to +85°C
2. Pull Force of Terminal: 500 gf for 1 minute
3. Operation Life: 100,000 Cycles
4. Conductive Rate (Switch-on Rate): min.over 90%
5. Humidity: 95% RH,40°C for 96 hrs.
6.Solder ability : After flux 245°C for 5±0.5 seconds
95% coverage
www.greatecs.com
1
Sensor Switches
NV3 Series
Vibration Switch
« NOTE
1. Suggestion Contact Rating: 5 mA.
2. For the continued product improvement as one of the company policy, specifications may change
or update without notice. The latest information can be obtained through our sales offices. Normally,
all products are supplied under our standard conditions.
« PRECAUTIONS FOR USE
1. The product is used mainly in electronic devices such as automotive devices, visual devices, home
electrical appliances, information devices and communication settings. If the products is intended
to be used for other endurance equipments requiring higher safety and reliability such as life
support system, space and aviations devices, disaster and safety system, it’s necessary to make
verification of conformity or contact us for the details before using.
2. Don’t try to clean the switch with a solvent or similar substance after the soldering Prozess.
3. The switch might be damaged if using the water-soluble flux.
4. The switch might be apart if the so ldering condition over specification.
5. Don’t use the switch in the environment with high humidity or other bedewing possibility,
as it may cause leaking among the terminals.
6. It might catch fire if the rating exceeds the specifications. Never use the switch beyond the Rating.
PACKAGE (Minimum Order Quantity: One Bag)
Part Number
1.
NV3-0A00
NV3-0B00
Package
Quantity
Total
Size
PE Bag
500 pcs
500 pcs
12.7 x 17.8 cm
Inner Box
10 Bags
5,000 pcs
36 x 20 x 9 cm
3 Boxes
15,000 pcs
36 x 28 x 23 cm
Carton
[email protected]
www.greatecs.com
2
Sensor Switches
NV4 Series
Vibration Switch
Applications:
1. Omni-directional vibration detecting: Remote
Controller, Wireless Mouse,etc.,occasions that
request for vibration Power ON function
2. Suitable to stroke signal applied such as earthquake
detecting system, bicycle alarms, car alarms, and home
security systems, toys, sporting shoes etc.
Dimensions/ Operation/ P.C.B. Layout(Unit: mm,Tolerance:±0.25mm)
Installation Position
P.C.B Layout
NV4 - AA00
Installation Position
P.C.B Layout
NV4 - BA00
All specifications are restricted to QA test criteria.
DRW: D. L. JIN, CHK: D.F. LEE, APP: H.Z. QIU, DC: 2011-11-14
GENERAL SPECIFICATIONS
Features:
Eletrical Characteristics:
1. Small size & compact space.
2. Housing made of high insulation plastic material,
free from electric conduction and rust problem.
3. Terminal and balls are gold plated to enhance the life.
4. All plastic material subject to industrial purpose meets
high temperature and fireproof function.
5. Suitable to IC trigger signal.
6. Complete replacement of mercury switch and meet
with environmental protection.
1. Contact Rating: 25mA, 24VDC
2. Contact Resistance: Initial: 5 max;
Afer Life Test: 10 max
3. Insulation Resistance:10M min. At 100 VDC
4. Switching type: Normal Close (NC)
5. Dielectric Strength: 500 VDC min. for 1 minute
6.Capacitance: 5pF max
Bill Of Material:
1. Housing: Glass-Fiber Liquid crystal Polymer
2. Base: Glass-Fiber Liquid crystal Polymer
3. Terminal: Copper Alloy, Gold plated(3µ”) over Nickel
4. Ball: Copper Alloy, Gold Plated(3µ”) over Nickel
[email protected]
Mechanical Characteristics:
1. Temperature Range: Operating: -25°C to +85°C ;
Storage : -40°C to +85°C
2. Pull Force of Terminal: 500 gf for 1 minute
3. Operation Life: 100,000 Cycles
4. Humidity: 95% RH,40°C for 96 hrs
5. Solder ability : After flux 260±5°C for 5±0.5
seconds 95% coverage
6. Reflow zone 260°C±5°Cfor 20 seconds max
www.greatecs.com
1
Sensor Switches
NV4 Series
Vibration Switch
« NOTE
1. Suggestion for Application: Adding design of “ON DELAY” is recommended. Application in occasions
that require vibration functions, Optical type Products are recommended.
2. Suggestion Contact Rating: 5 mA.
3. Conductive Rate: To test the conductivity (Switch-on Rate) of one switch individually for100 times,
if the switch conductive 95 times, we call the “conductive rate” is 95%.
4. For the continued product improvement as one of the company policy, specifications may change
or update without notice. The latest information can be obtained through our sales offices. Normally,
all products are supplied under our standard conditions.
« PRECAUTIONS FOR USE
1. The product is used mainly in electronic devices such as automotive devices, visual devices, home
electrical appliances, information devices and communication settings. If the products is intended
to be used for other endurance equipments requiring higher safety and reliability such as life
support system, space and aviations devices, disaster and safety system, it’s necessary to make
verification of conformity or contact us for the details before using.
2. Don’t try to clean the switch with a solvent or similar substance after the soldering Prozess.
3. The switch might be damaged if using the water-soluble flux.
4. The switch might be apart if the so ldering condition over specification.
5. Don’t use the switch in the environment with high humidity or other bedewing possibility,
as it may cause leaking among the terminals.
6. It might catch fire if the rating exceeds the specifications. Never use the switch beyond the Rating.
PACKAGE (Minimum Order Quantity: One Bag / One Reel)
Part Number
1.
2.
NV4-AA00
NV4-BA00
[email protected]
Package
Quantity
Total
Size
PE Bag
500 pcs
500 pcs
12.7 x 17.8 cm
Inner Box
8 Bags
4,000 pcs
36 x 20 x 9 cm
Carton
3 Boxes
12,000 pcs
36 x 28 x 23 cm
Reel
650 pcs
650 pcs
30 x 30 cm
Inner Box
2 Reels
1,300 pcs
36 x 34 x 7 cm
Carton
4 Boxes
5,200 pcs
37 x 37 x 28 cm
www.greatecs.com
2