Sensor Switches

Sensor Switches
Vibration Switch
NV1 Series
Applications:
1. Two Axis Vibration Detecting: Toys, Sporting Shoes
Dimensions/ Operation/ P.C.B. Layout(Unit: mm,Tolerance:±0.25mm)
Installation Position
P.C.B Layout
NV1 - 0A00
Installation Position
P.C.B Layout
NV1 - 0B00
GENERAL SPECIFICATIONS
Features:
1. Small size & compact space.
2. Terminals gold plated to enhance the life.
3. Special structure; increased strength between
housing and base.
4. All plastic material subject to industrial purpose
meets high temperature and fireproof function
caused by contact oxidized.
5. Suitable to IC trigger signal.
6. Complete replacement of mercury switch and
meet with environmental protection.
All specifications are restricted to QA test criteria.
DRW: D.L. JIN, CHK: D.F. LEE, APP: H.Z. QIU
Bill Of Material:
1. Housing: ZINC Alloy, Tin Plated over NIckel
2. Base: Class-Fiber Polyamide
3. Terminal: Copper Alloy, Gold(3µ”) plated over Nickel
4. Spring: Copper Alloy, NIckel plated
5. Steel Ball: Stainless Steel
[email protected]
Eletrical Characteristics:
1. Contact Rating: 25mA, 24VDC
2. Insulation Resistance:1000MΩ min. At 100 VDC
3. Switching type: Normal Open (NO)
4. Dielectric Strength: 500 VDC min. for 1 minute
5.Capacitance: 5pF max
Mechanical Characteristics:
1. Temperature Range: Operating: -25°C to +85°C ;
Storage : -40°C to +85°C
2. Pull Force of Terminal: 500 gf for 1 minute
3. Operation Life: 100,000 Cycles
4. Humidity: 95% RH,40°C for 96 hrs.
5.Solder ability : After flux 245±5°C for 5±0.5 seconds
95% coverage
www.greatecs.com
1
Sensor Switches
Vibration Switch
NV1 Series
« NOTE
1. Suggestion Contact Rating: 5 mA.
2. Conductive Rate: To test the conductivity (Switch-on Rate) of one switch individually for100 times,
if the switch conductive 95 times, we call the “conductive rate” is 95%.
3. For the continued product improvement as one of the company policy, specifications may change
or update without notice. The latest information can be obtained through our sales offices.
Normally, all products are supplied under our standard conditions.
« PRECAUTIONS FOR USE
1. The product is used mainly in electronic devices such as automotive devices, visual devices, home
electrical appliances, information devices and communication settings. If the products is intended
to be used for other endurance equipments requiring higher safety and reliability such as life support
system, space and aviations devices, disaster and safety system, it’s necessary to make verification of
conformity or contact us for the details before using.
2. Don’t try to clean the switch with a solvent or similar substance after the soldering process.
3. The switch might be damaged if using the water-soluble flux.
4. Don’t use the switch in the environment with high humidity or other bedewing possibility,
as it may cause leaking among the terminals.
5. It might catch fire if the rating exceeds the specifications. Never use the switch beyond the
rating.
PACKAGE (Minimum Order Quantity: One Bag)
Part Number
1.
NV1-0A00
NV1-0B00
[email protected]
Package
Quantity
Tota
Size
PE Bag
500 pcs
500 pcs
12.7 x 17.8 cm
Inner Box
10 Bags
5,000 pcs
36 x 20 x 9 cm
Carton
3 Boxes
15,000 pcs
36 x 28 x 23 cm
www.greatecs.com
2