Green Power Solutions srl Via Venezia 34D - 10088 Volpiano (TO), Italy Phone: +39-011-988 2251 Fax: +39-011-988 1358 Web: www.gpsemi.it e-mail: [email protected] GPTN2115 PHASE CONTROLLED SCR High reliability operation DC power supply AC drives VOLTAGE UP TO 1600 V AVERAGE CURRENT 1150 A SURGE CURRENT BLOCKING CHARACTERISTICS Characteristic Conditions 15 kA Value VRRM Repetitive peak reverse voltage 1600 V VRSM Non-repetitive peak reverse voltage 1700 V VDRM Repetitive peak off-state voltage IDRM IRRM Repetitive peak off-state current, max. Repetitive peak reverse current, max. 1600 V VDRM, single phase, half wave, Tj = Tjmax VRRM, single phase, half wave, Tj = Tjmax 50 mA 50 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 1150 A IT(RMS) R.M.S. on-state current Sine wave,180° conduction, T h = 55 °C Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 1806 A ITSM Surge on-state current I²t VT(TO) I² t for fusing coordination Threshold voltage Tj = Tjmax 0,933 V rT On-state slope resistance Tj = Tjmax 0,302 mΩ VTM Peak on-state voltage, max IH IL Holding current, max Latching current, typ On-state current IT = 1500 A , Tj = Tjmax Tj = 25 °C Tj = 25 °C 15 kA 1125 kA²s 1,39 V 300 mA 700 mA TRIGGERING CHARACTERISTICS Gate trigger voltage Tj = 25 °C, V D = 5 V 3,0 V IGT Gate trigger current Tj = 25 °C, V D = 5 V 250 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0,3 V PGM Peak gate power dissipation Pulse width 1 ms 150 W PG(AV) Average gate power dissipation IFGM Peak gate current 10 A VFGM VRGM Peak gate voltage (forward) Peak gate voltage (reverse) 12 V 10 V VGT 3 W SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Non rep. - Tj = Tjmax dV/dt tq Critical rate of rise of off-state voltage Tj = Tjmax Turn-off time, typ Tj = Tjmax, IT = 2000 A, di/dt = -5 A/µs 200 A/µs 1000 V/µs µs VR = 200 V, VD = 67% VDRM, dV/dt = 20 V/µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0,030 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0,007 °C/W Tjmax Max operating junction temperature Tstg Storage temperature F Clamping force ± 5% Mass Document GPTN2115T002 125 °C -40 / 125 °C 12 kN 300 g GPTN2115 PHASE CONTROLLED SCR Current rating - sine wave Power loss - sine wave 2500 120 180° 100 90 80 70 60° 30° 1500 1000 500 60 30° 60° 50 0 200 400 600 90° 180° 120° 800 1000 0 1200 0 200 400 600 IT [A] 800 1000 1200 IT[A] Maximum surge current d.s. cooled On-state voltage drop 16 14 2500 2500 12 2000 2000 10 1500 1500 [A] ITIT[A] ITSM [A] 120° 90° 2000 110 PF [W] Heatsink temperature [°C] 130 8 6 4 Tj=Tjmax Tj=Tjmax 1000 1000 500 500 2 0 1 10 100 00 0,5 0 1 0,5 1,5 1 2 1,52,5 V VTT [V] [V] Number of cycle current pulses [n] Thermal impedance (j-c) 0,035 ZTH(j-c) [°C / W] 0,03 0,025 dimensions mm 0,02 0,015 0,01 0,005 0 0,001 0,01 0,1 1 10 100 Time [s] In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GPTN2115T002 2 3