GPTP2164 - Green Power Solutions

Green Power Solutions srl
Via Venezia 34D - 10088 Volpiano (TO), Italy
Phone: +39-011-988 2251
Fax: +39-011-988 1358
Web: www.gpsemi.it
e-mail: [email protected]
GPTP2164
PHASE CONTROLLED SCR
High reliability operation
DC power supply
AC drives
VOLTAGE UP TO
1800 V
AVERAGE CURRENT
1645 A
SURGE CURRENT
BLOCKING CHARACTERISTICS
Characteristic
Conditions
27 kA
Value
VRRM
Repetitive peak reverse voltage
1800 V
VRSM
Non-repetitive peak reverse voltage
1900 V
VDRM
Repetitive peak off-state voltage
IDRM
IRRM
Repetitive peak off-state current, max.
Repetitive peak reverse current, max.
1600 V
VDRM, single phase, half wave, Tj = Tjmax
VRRM, single phase, half wave, Tj = Tjmax
50 mA
50 mA
ON-STATE CHARACTERISTICS
IT(AV)
Average on-state current
Sine wave,180° conduction, Th = 55 °C
1645 A
IT(RMS)
R.M.S. on-state current
Sine wave,180° conduction, T h = 55 °C
Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax
2584 A
ITSM
Surge on-state current
I²t
VT(TO)
I² t for fusing coordination
Threshold voltage
Tj = Tjmax
rT
On-state slope resistance
Tj = Tjmax
0.23 mΩ
VTM
Peak on-state voltage, max
1.45 V
IH
IL
Holding current, max
Latching current, typ
On-state current IT = 2900 A , Tj = 25 °C
Tj = 25 °C
Tj = 25 °C
27 kA
3920 kA²s
0.84 V
300 mA
700 mA
TRIGGERING CHARACTERISTICS
Gate trigger voltage
Tj = 25 °C, V D = 5 V
IGT
Gate trigger current
Tj = 25 °C, V D = 5 V
300 mA
VGD
Non-trigger voltage
VD = 67% VRRM, Tj = Tjmax
0.25 V
Pulse width 100 µs
150 W
VGT
3.5 V
PGM
Peak gate power dissipation
PG(AV)
Average gate power dissipation
IFGM
Peak gate current
10 A
VFGM
VRGM
Peak gate voltage (forward)
Peak gate voltage (reverse)
30 V
5 V
2 W
SWITCHING CHARACTERISTICS
di/dt
Critical rate of rise of on-state current
Tj = Tjmax
200 A/µs
dV/dt
tq
Critical rate of rise of off-state voltage
Tj = Tjmax
1000 V/µs
Turn-off time, typ
Tj = Tjmax, IT = 1000 A, di/dt = -20 A/µs
µs
VR = 50 V, VD = 67% VDRM, dV/dt = 20 V/µs
THERMAL AND MECHANICAL CHARACTERISTICS
Rth(j-c)
Thermal resistance (junction to case)
Double side cooled
0.018 °C/W
Rth(c-h)
Thermal resistance (case to heatsink)
Double side cooled
0.006 °C/W
Tjmax
Max operating junction temperature
Tstg
Storage temperature
F
Clamping force ± 10%
Mass
Document GPTP2164T001
125 °C
-40 / 125 °C
22 kN
500 g
GPTP2164
PHASE CONTROLLED SCR
Current rating - sine wave
Power loss - sine wave
3000
120
180°
110
2500
100
2000
90°
90
80
70
30°
1500
1000
500
60
30°
50
0
400
60°
90°
800
120°
1200
180°
0
1600
0
400
IT [A]
1200
1600
On-state voltage drop
30
25
[A]
ITIT[A]
20
15
3500
3500
3000
3000
2500
2500
2000
2000
10
1500
1500
1000
1000
5
500
500
0
1
800
IT[A]
Maximum surge current
d.s. cooled
ITSM [A]
120°
60°
PF [W]
Heatsink temperature [°C]
130
10
100
00
0.5
0
Tj=Tjmax
Tj=Tjmax
0.5 1
1
1.5 1.5
VTT [V]
Number of cycle current pulses [n]
Thermal impedance (j-c)
ZTH(j-c) [°C / W]
0.02
0.018
0.016
0.014
0.012
0.01
0.008
0.006
0.004
0.002
0
0.001
0.01
0.1
1
10
100
Time [s]
dimensions mm
In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet
without notice.
Document GPTP2164T001
2