GC89…R BAR CLAMP FOR HOCKEY PUK DEVICES ORDERING INFORMATION TABLE GC89 Clamps can be ordered using the following part numbering system (1) Construction type: B N B A 20 (1) (2) (3) (4) (5) R B = with double bar S = with single bar (2) Insulator position: N = upper side (3) Insulator code: (4) Bolt code: (5) Clamping force (in kN): see table below R = lower side K K see table below 12 16 20 24 (6) Special accessories blank = no accessories S = extra bar spacer D = pressure disc in place of pressure bar K: Total thickness of the assembly to be clamped For thicknesses S' Min < K < S Min an additional 4mm thick bar spacer is needed (see list of special accessories) Type GC89BN…R: suggested insulator/bolt types Allowed clearance S Insulator choice S' Min [mm]** S Min [mm] S Max [mm] (3) Ins. Length [mm] 11 15 30 A 50 21 25 40 A 50 31 35 50 B 70 41 45 60 B 51 55 70 61 65 71 75 Bolt choice (4) Max height Bolt Length [mm] T [mm] Z 100 115 A 110 125 B 120 135 70 C 130 145 C 95 D 140 155 80 C 95 E 150 165 90 C 95 F 160 175 ** with additional bar spacer only Type GC89BR…R: suggested insulator/bolt types Allowed clearance S Insulator choice Max height 3 Bolt choice S' Min [mm]** S Min [mm] S Max [mm] (3) Ins. Length [mm] (4) Bolt Length [mm] T [mm] 11 15 30 A 50 *** Z 100 129 21 25 40 A 50 A 110 139 31 35 50 A 50 B 120 149 41 45 60 B 70 C 130 159 51 55 70 B 70 D 140 169 61 65 80 B 70 E 150 179 71 75 90 C 95 F 160 189 ** with additional bar spacer only *** For S Max Type GC89SN…R: suggested insulator/bolt types Allowed clearance S Insulator choice Bolt choice Max height S Min [mm] S Max [mm] (3) Ins. Length [mm] (4) Bolt Length [mm] T [mm] 20 24 39 A 50 Z 100 110 30 34 49 B 70 A 110 120 40 44 59 B 70 B 120 130 50 54 69 C 95 C 130 140 60 64 79 C 95 D 140 150 70 74 89 C 95 E 150 160 80 84 99 D 120 F 160 170 4 S' Min [mm]** ** with additional bar spacer only Type GC89SR…R: suggested insulator/bolt types Allowed clearance S Insulator choice S' Min [mm]** S Min [mm] S Max [mm] (3) Ins. Length [mm] 40 44 59 B 50 54 69 B 60 64 79 70 74 80 84 90 100 Bolt choice Max height (4) Bolt Length [mm] T [mm] 70 Z 100 129 70 A 110 139 B 70 B 120 149 89 C 95 C 130 159 99 C 95 D 140 169 94 109 D 120 E 150 179 104 119 D 120 F 160 189 ** with additional bar spacer only Document GC89…RT001 S (6) GC89…R BAR CLAMP FOR HOCKEY PUK DEVICES BAR CLAMP OUTLINES 115 T Ø12 50 up to 120 Ø12 43 77 14 20 29 4 S 77 S T 24.5 63 20 20 24.5 50 up to 120 14 115 25 89 25 89 GC89BN...R GC89BR...R 115 89 77 25 89 25 GC89SN...R GC89SR...R Dimensions in mm - Tolerances according to ISO 2768 MK Document GC89…RT001 S Ø12 14 50 up to 120 T 22 Min. S Ø12 77 T 24.5 20 20 24.5 50 up to 120 14 115 GC89…R BAR CLAMP FOR HOCKEY PUK DEVICES S' Min S Max OPTIONAL BAR SPACER S Min PRESSURE DISC SPECIAL ACCESSORIES The following special accessories are available on request (see ordering information table) Bar spacer 4 Ø13 25 115 Ø24 4 Pressure disc Useful for grooved heatsink Suggested groove diameter 27mm +/- 0.5 Dimensions in mm - Tolerances according to ISO 2768 MK In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GC89…RT001