Green Power Solutions srl Via Greto di Cornigliano 6R - 16152 Genova , Italy Phone: +39-010-659 1869 Fax: +39-010-659 1870 Web: www.gpsemi.it E-mail: [email protected] GC118…F BAR CLAMP FOR HOCKEY PUK DEVICES Clamping total thikness of assembly from 21mm to 125mm Pre-loaded to the specific clamping force (22 ÷ 32 kN) Maximum device diameter: 105mm Surface passivation to provide extra protection Hexagon head bolt partially threaded M8x1.25, UNI5737, 8.8 steel Various lengths of bolts and insulators Flat clamping head for optimal clamping force application Four styles available User friendly clamping force indicator UL94 certified insulation material Parameter Weight Clamping Force* Unit g kN Types Testing conditions Values Notes Min GC118S…F GC118B…F 22 GC118…24F 24 GC118…30F GC118…32F 30 32 ± 10% VRMS Insulating Material 3000 E121562 110 Max. working temperature °C Creepage distance: mm 28 Clearance distance: mm 20.3 Flammability * 1 min Noryl ∗∗ UL File Storage temperature -30 °C 110 -40 mm UL94 V-1 Flame class rating 1.5 mm UL94 V-0 Flame class rating 8.00 mm CSA Flammability 1.00 Other clamping forces available: contact factory ** Noryl is a registered trade mark of General Electric Document GC118…FT001 Max 1030 1870 GC118…22F Clamping Force tolerance Insulation Voltage Typ 930 1750 GC118…F BAR CLAMP FOR HOCKEY PUK DEVICES ORDERING INFORMATION TABLE GC118 Clamps can be ordered using the following part numbering system (1) Construction type: B N B A 24 (1) (2) (3) (4) (5) F B = with double bar S = with single bar (2) Insulator position: N = upper side (3) Insulator code: (4) Bolt code: (5) Clamping force (in kN): see table below see table below K 22 K R = lower side 24 30 32 (6) Special accessories blank = no accessories K: Total thickness of the assembly to be clamped S = extra bar spacer For thicknesses S' Min < K < S Min an additional 4mm thick bar spacer is needed (see list of special accessories) Type GC118BN…F: suggested insulator/bolt types Allowed clearance S Insulator choice Bolt choice Max height S' Min [mm]** S Min [mm] S Max [mm] (3) Ins. Length [mm] (4) Bolt Length [mm] T [mm] 21 25 40 A 50 Z 100 117 31 35 50 B 70 A 110 127 41 45 60 B 70 B 120 137 51 55 70 C 95 C 130 147 61 65 80 C 95 D 140 157 71 75 90 C 95 E 150 167 81 85 100 D 120 F 160 177 ** with additional metal spacer only Type GC118BR…F: suggested insulator/bolt types Allowed clearance S Insulator choice S' Min [mm]** S Min [mm] S Max [mm] (3) Ins. Length [mm] Bolt choice Max height (4) Bolt Length [mm] T [mm] 21 25 40 A 50 *** Z 100 129 31 35 50 A 50 A 110 139 41 45 60 A 50 B 120 149 51 55 70 B 70 C 130 159 61 65 80 B 70 D 140 169 71 75 90 C 95 E 150 179 81 85 100 C 95 F 160 189 ** with additional metal spacer only *** For S Max Type GC118SN…F: suggested insulator/bolt types Allowed clearance S Insulator choice S' Min [mm]** S Min [mm] S Max [mm] (3) Ins. Length [mm] 21 25 40 A 31 35 50 B 41 45 60 51 55 61 Bolt choice Max height (4) Bolt Length [mm] T [mm] 50 Z 100 110 70 A 110 120 B 70 B 120 130 70 C 95 C 130 140 65 80 C 95 D 140 150 71 75 90 C 95 E 150 160 81 85 100 D 120 F 160 170 ** with additional metal spacer only Type GC118SR…F: suggested insulator/bolt types Allowed clearance S Insulator choice Bolt choice Max height S' Min [mm]** S Min [mm] S Max [mm] (3) Ins. Length [mm] (4) Bolt Length [mm] T [mm] 46 50 65 B 70 Z 100 129 56 60 75 B 70 A 110 139 66 70 85 B 70 B 120 149 76 80 95 C 95 C 130 159 86 90 105 C 95 D 140 169 96 100 115 D 120 E 150 179 106 110 125 D 120 F 160 189 ** with additional metal spacer only Document GC118…FT001 S (6) GC118…F BAR CLAMP FOR HOCKEY PUK DEVICES BAR CLAMP OUTLINES T 22.5 22.5 67 143 39 143 Ø12 S 106 106 25 Ø12 118 25 118 GC118BN...F GC118BR...F 143 118 GC118SN...F T 22.5 22 Ø12 S 106 50 UP TO 120 22.5 25 14 143 106 Ø12 118 GC118SR...F Dimensions in mm - Tolerances according to ISO 2768 MK Document GC118…FT001 GC118…F BAR CLAMP FOR HOCKEY PUK DEVICES S' Min S Max OPTIONAL BAR SPACER S Min PRESSURE DISC SPECIAL ACCESSORIES The following special accessories are available on request (see ordering information table) 145 4 Ø13 25 Bar spacer Dimensions in mm - Tolerances according to ISO 2768 MK In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GC118…FT001