DIOTEC ELECTRONICS CORP. Data Sheet No. FRWB-150-1B 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 1.5 AMP FAST RECOVERY BRIDGE RECTIFIERS MECHANICAL SPECIFICATION FEATURES SERIES FWB150 - FWB1510 ACTUAL SIZE OF FWB PACKAGE PRV Ratings from 50 to 1000 Volts A Surge overload rating to 50 Amps peak Reliable low cost molded epoxy construction D Ideal for printed circuit board applications Fast switching for high efficiency L One (1) Lead (+) UL RECOGNIZED - FILE #E124962 L1 Three (3) Leads RoHS COMPLIANT B MECHANICAL DATA B1 _ Case: Molded Epoxy, U/L Flammability Rating 94V-0 B1 Terminals: Round tin plated pins MILLIMETERS + INCHES AC SYM MIN MAX MIN MAX A 8.6 8.89 0.340 0.350 B 0.76 0.81 0.030 0.032 B1 4.6 5.6 0.180 0.220 D 5.1 5.6 0.200 0.220 L 27.94 n/a 1.10 n/a 25.4 n/a 1.0 n/a Soldering: Per MIL-STD 202 Method 208 guaranteed Polarity: Marked on case Mounting Position: Any Weight: 0.05 Ounces (1.3 Grams) L1 + AC - MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Ratings at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive loads, derate current by 20%. PARAMETER (TEST CONDITIONS) RATINGS SYMBOL UNITS Maximum DC Blocking Voltage VRM FWB 150 50 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Maximum Peak Recurrent Reverse Voltage VRRM 50 100 200 400 600 800 1000 Series Number o Average Forward Rectified Current @ TC = 75 C Peak Forward Surge Current (8.3mS single half sine wave O superimposed on rated load) TJ = 125 C Maximum Forward Voltage (Per Diode) at 1 Amp DC Maximum Average DC Reverse Current at Rated DC Blocking Voltage (Per Bridge Element) Maximum Reverse Recovery Time (Note 1) o C o @ TA = 25 @ TA = 100 C FWB 151 100 FWB 152 200 FWB 154 400 FWB 156 600 FWB 158 800 FWB 1510 1000 VOLTS IO 1.5 IFSM 50 VFM 1.3 VOLTS IRM 10 1 mA mA TRR 200 AMPS 300 500 nS Typical Thermal Resistance, Junction to Ambient (Note 2) RqJA 40 °C/W Minimum Insulation Breakdown Voltage (Circuit to Case) VISO 2400 VOLTS Junction Temperature Range TJ, -55 to +135 TSTG -55 to +135 Storage Temperature Range NOTES: (1) TJ=25 C, IF=0.5A, IR=1A, IRR=0.25A (2) Mounted on PC Board with 0.2" sq. (5.5mm sq.) copper pads and lead length of 0.375" (9.5mm) o °C 3.01 1-5wb G3 DIOTEC ELECTRONICS CORP. Data Sheet No. FRWB-150-2A 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 1.5 AMP FAST RECOVERY SILICON BRIDGE RECTIFIERS RATING & CHARACTERISTIC CURVES FOR SERIES FWB150 - FWB1510 50 2.00 Peak Forward Surge Current (Amperes) Average Forward Current, Io (Amperes) 2.50 60Hz Resistive or Inductive Loads 1.50 1.00 NOTE 1 0.50 0 0 50 75 100 125 40 30 20 NOTE 2 10 0 150 o 10 1 100 Case Temperature, C Number of Cycles at 60 Hz FIGURE 1. FORWARD CURRENT DERATING CURVE FIGURE 2. MAXIMUM NON-REPETITIVE SURGE CURRENT 20 10 1.0 Instantaneous Reverse Current, I (Microamperes) Instantaneous Forward Current Amperes 10 NOTE 3 0.1 TJ= 100 C o 1.0 .1 0.1 TJ = 25 C o 0.01 0 0.01 0.4 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage 0.6 08 1.0 1.2 1.4 1.6 1.8 FIGURE 4. TYPICAL REVERSE CHARACTERISTICS Instantaneous Forward Voltage (Volts) FIGURE 3. TYPICAL FORWARD CHARACTERISTIC PER DIODE NOTES (1) Bridge Mounted on PC Board With 0.2" Sq. (5.5mm Sq.) Copper Pads And Bridge Lead Length of 0.375" (9.5mm) O (2) 8.3ms Single Half Sine - Wave (JEDEC Method) TJ = 125 C o (3) TJ = 25 C; Pulse Width = 300 mSec, 1% Duty Cycle G4 3.1 1_5wb