Piggyback Shrink Boot Connector Adapters Table I Front End Dimensional Details Notes: 1. Connector shell size designations within are for reference only; do not use in part numbers. 2. Metric dimensions (mm) are in parentheses and are for reference only. (1 inch = 25.4 mm) 3. Consult factory for accessory interface data not listed. 4. Use Glenair 600-091 or 600-157 tool to tighten coupling nut. Rubber jaw pliers or strap wrench may damage the parts. C B A D TABLE I SHELL SIZE FOR CONNECTOR DESIGNATOR A 08 03 10 12 7 14 12 16 19 18 27 20 37 22 24 61 28 © 2012 Glenair, Inc. F/L 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 - H 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J - C DIA A THREAD B DIA MAX REF MAX 7/16-28 UNEF .59 (15.0) M12 x 1 - 6H .65 (16.5) .86 (21.8) 9/16-24 UNEF .72 (18.3) .98 (24.9) M15 x 1 - 6H .77 (19.6) 5/8-24 UNEF .77 (19.6) 11/16-24 UNEF .84 (21.3) 1.16 (29.4) M18 x 1 - 6H .89 (22.6) .9 3/4-20 UNEF .91 (23.1) 13/16-20 UNEF .97 (24.6) M22 x 1 - 6H 1.03 (26.2) 1.28 (32.5) 7/8-20 UNEF 1.03 (26.2) 15/16-20 UNEF 1.09 (27.7) 1.41 (35.7) M25 x 1 - 6H 1.15 (29.2) 1 1-20 UNEF 1.15 (29.2) 1-1/16-18 UNEF 1.22 (31.0) 1.52 (38.5) M28 x 1 - 6H 1.28 (32.5) 1-1/8-18 UNEF 1.28 (32.5) 1 1-3/16-18 UNEF 1.34 (34.0) 1.64 (41.7) M31 x 1 - 6H 1.41 (35.8) 1-1/4-18 UNEF 1.41 (35.8) 1-5/16-18 UNEF 1.47 (37.3) 1.77 (44.9) M34 x 1 - 6H 1.53 (38.9) 1-7/16-18 UNEF 1.59 (40.4) 1.89 (48.0) M37 x 1 - 6H 1.66 (42.2) 1-1/2-18 UNEF 1.66 (42.2) 1-3/4-18 UNS 1.97 (50.0) 2.16 (54.8) U.S. CAGE Code 06324 D FLATS REF .75 (19.1) .88 (22.2) . 1.00 (25.4) 1.13 (28.6) 1.25 (31.8) 1.38 (35.1) 1 1.50 (38.1) 1.63 (41.3) 1.75 (44.5) 2.00 (50.8) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 3 E-Mail: [email protected]