Micro-D PCB Micro-D MWDM-BS Vertical Mount Thru-Hole Printed Circuit Board Connectors High Performance – These connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. A B Solder-Dipped – Terminals are coated with Sn60/Pb40 tin-lead solder for best solderability. Optional gold-plated terminals are available for RoHS compliance. C Rear Mountable – Can be installed through panels up to .125 inch thick. Specify rear panel mount jackposts. D E F G H J K L M How To Order BS Vertical Style PCB Micro-D Connectors Sample Part Number Q 1 l -15 p bs Series MWDM Glenair Micro-D Shell Material and Finish Aluminum Shell 1- Cadmium 2- Nickel 4- Black Anodize 5- Gold 6- Chem Film Insulator Material L- LCP or PPS LCP - 30% Glass-filled liquid crystal polymer PPS- 40% Glass-filled polyphenylene sulfide Contact Layout 9, 15, 21, 25, 31, 37, 51, 100 (See Table II) Contact Type P- Pin S- Socket Termination Type BS - Board Straight Jackpost Option Omit- None P- Jackpost Jackposts for Rear Panel Mounting R1 - .032” Panel R2 - .047” Panel R3 - .062” Panel (See Table I) R4 - .093” Panel R5 - .125” Panel R6 - .080" Panel Threaded Insert Option T- Threaded Insert In Board Mount Hole Omit- for Thru-Hole Terminal Length in Inches .080, .110, .125, .140, .150, .172, .190, .250 Length in Inches ± .015 (0.38) (See Table II) Gold-Plated Terminal Mod Code T hese connectors are solder-dipped in 60/40 tin-lead solder. To delete the solder dip and change to gold-plated terminals, add code 513 r3 T -.110 513 Stainless Steel Shell 3 - Passivated Table I: Jackpost Options N P mwdm No Designator P R1 Thru R6 Panel THREADED INSERT INDEX Thru-Hole For use with Glenair jackposts only. Order hardware separately. Install with threadlocking compound. © 2013 Glenair, Inc. Standard Jackpost Factory installed, not intended for removal. High Performance Micro-D Connectors and Cables Jackpost for Rear Panel Mounting Shipped loosely installed. Install with permanent threadlocking compund. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-6 E-Mail: [email protected] Micro-D PCB Micro-D MWDM-BS Vertical Mount Thru-Hole Printed Circuit Board Connectors Table II: Dimensions A B A C F C K G ED D 2 X PCB MTNG HOLES 9-51 CONTACTS .096 ± .005 (2.43 ± 0.13) 100 CONTACTS .125 ± .005 (23.18 ± 0.13) A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 100P 100S B C Max. In. mm. In. mm. ±.003 ± 0.08 .790 .790 .940 .940 1.180 1.180 1.275 1.275 1.575 1.575 1.875 1.875 1.775 1.775 2.585 2.585 20.07 20.07 23.88 23.88 29.97 29.97 32.39 32.39 40.01 40.01 47.63 47.63 45.09 45.09 65.66 65.66 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.800 1.800 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 45.72 45.72 D Max. In. mm. In. mm. .333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.383 1.451 8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.13 36.86 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .228 .296 .270 .333 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.79 7.52 6.86 8.46 E Max. In. mm. F G © 2013 Glenair, Inc. 3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts) H In. mm. In. mm. In. mm. ±.004 ±0.10 ±.010 ±0.25 ±.007 ±0.18 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .310 7.87 .183 .310 7.87 .195 .351 8.92 .183 .351 8.92 .195 .460 11.68 .183 .460 11.68 .195 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force TAIL LENGTH ± .015 (0.38) .020 ± .002 (0.51± 0.05) .333 8.46 1.150 .333 8.46 1.150 .333 8.46 1.150 .333 8.46 1.150 .333 8.46 1.450 .333 8.46 1.450 .333 8.46 1.500 .333 8.46 1.500 .333 8.46 1.800 .333 8.46 1.800 .333 8.46 2.100 .333 8.46 2.100 .333 8.46 2.000 .333 8.46 2.000 .525 13.34 2.800 .525 13.34 2.800 29.21 29.21 29.21 29.21 36.83 36.83 38.10 38.10 45.72 45.72 53.34 53.34 50.80 50.80 71.12 71.12 J Max. F K In. mm. In. mm. ±.010 ±0.25 1.390 1.390 1.390 1.390 1.690 1.690 1.740 1.740 2.040 2.040 2.340 2.340 2.270 2.270 3.250 3.250 35.31 35.31 35.31 35.31 42.93 42.93 44.20 44.20 51.82 51.82 59.44 59.44 57.64 57.64 82.55 82.55 .155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .155 .293 .293 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 3.94 7.44 7.44 Materials and Finishes Connector Shell Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options Insulator, Tray Liquid Crystal Polymer (LCP)/ Polyphenylene Sulfide (PPS) Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant Fluorosilicone Rubber, Blue Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold Over Nickel Plating Gold Plated Copper Alloy, Solder Dipped 300 Series Stainless Steel Epoxy Resin Hysol EE4215 High Performance Micro-D Connectors and Cables U.S. CAGE Code 06324 E Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-7 E-Mail: [email protected] G H J K L M N P Q INDEX J H B Micro-D PCB Micro-D MWDM-BS Vertical Mount Thru-Hole A B C D Printed Circuit Board Connectors MICRO-D BS Board Mount Connector PCB Layouts – Pin Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter 2.000 (50.80) 1.150 (29.21) CL .050 (1.27) 9 5 .100 (2.54) TYP 8 4 3 35 1 18 33 48 32 16 15 47 46 31 14 45 30 29 13 44 28 12 43 27 11 15 14 7 .100 (2.54) TYP 13 12 6 5 26 10 10 3 31 1 11 10 9 18 16 30 15 7 36 21 22 6 37 38 5 4 20 19 3 2 .150 (3.81) 1 29 14 28 27 13 26 12 11 25 10 24 9 23 8 21 22 7 6 20 5 19 4 18 17 3 2 1 .150 (3.81) 1.500 (38.10) 16 6 .100 (2.54) TYP 31 PIN 15 5 14 4 .100 (2.54) TYP 13 3 12 2 25 1 .225 (5.72) CL .050 (1.27) .100 (2.54) TYP .050 (1.27) TYP 17 8 23 7 .100 (2.54) TYP CL 19 24 8 39 .050 (1.27) TYP 1.450(36.8) 20 40 CL 15 PIN 21 25 9 .050 (1.27) 9 2 .225 (5.72) .050 (1.27) 41 1.800 (45.72) 11 4 42 51 PIN .100 (2.54) TYP .050 (1.27) TYP G 13 24 12 23 21 22 11 9 10 .100 (2.54) TYP 20 8 21 PIN .100 (2.54) TYP .050 (1.27) TYP 19 7 18 6 17 5 16 4 15 3 14 2 .150 (3.81) 1 25 PIN 2.100 (53.34) Connector Orientation CL .050 (1.27) 37 M Pin #1 19 18 .100 (2.54) TYP .050 (1.27) TYP 36 35 17 34 16 .100 (2.54) TYP 33 15 32 14 31 13 30 12 29 11 28 10 27 9 26 8 25 7 24 6 23 5 21 22 4 3 20 2 .150 (3.81) 1 37 PIN N 2.800(71.12B ) CL .100 (2.54) TYP P Q 34 17 .050 (1.27) TYP 49 CL F L 2 .100 (2.54) TYP 9 PIN 8 K 6 50 1.150 (29.21) .050 (1.27) J 51 .375 (9.53) E H .100 (2.54) TYP .050 (1.27) TYP 7 CL .100 (2.54) TYP 100 99 75 51 .050 (1.27) 26 50 25 97 73 49 24 .150 (3.81) .050 (1.27) TYP 98 74 .100 (2.54) TYP 96 72 48 23 95 71 47 22 94 70 46 21 93 69 45 20 92 68 44 19 91 67 43 18 42 17 90 66 89 65 41 16 88 64 40 15 87 63 39 14 86 62 37 38 13 85 61 12 84 60 36 11 83 59 35 10 82 58 34 9 81 57 33 8 80 56 32 7 79 55 31 6 78 54 30 5 77 53 29 4 76 52 28 3 27 2 1 INDEX 100 PIN © 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-8 E-Mail: [email protected] Micro-D PCB Micro-D MWDM-BS Vertical Mount Thru-Hole Printed Circuit Board Connectors MICRO-D BS Board Mount Connector PCB Layouts – Socket Connectors Patterns shown are for connector mounting side of PC board. 9 Thru 51 Contacts .096 (2.44) Diameter Mounting Holes, 100 Pin .125 (3.18) Diameter B 2.000 (50.80) 1.150 (29.21) CL 6 1 .100 (2.54) TYP 7 2 .100 (2.54) TYP .050 (1.27) TYP 8 3 36 9 4 5 1 .375 (9.53) .050 (1.27) TYP 37 19 20 2 38 21 3 39 22 40 23 4 41 24 5 42 25 6 43 26 7 8 9 .100 (2.54) TYP .050 (1.27) TYP .050 (1.27) 1 2 .100 (2.54) TYP 12 3 13 4 5 10 14 6 7 1 8 .225 (5.72) 1 2 14 3 15 4 .100 (2.54) TYP 16 18 2 19 20 3 21 4 22 5 23 18 6 19 7 6 7 8 8 20 9 21 10 14 11 .225 (5.72) .050 (1.27) 1 2 2 9 27 10 11 18 28 12 29 30 13 14 31 15 17 3 18 4 19 16 5 6 79 54 21 7 22 8 9 23 10 24 11 21 2 22 3 23 4 .100 (2.54) TYP 24 5 25 6 26 27 7 8 25 12 .150 (3.81) 13 25 SOCKET 29 10 30 11 32 31 12 13 33 14 80 55 30 81 56 57 32 31 5 82 6 83 58 33 7 84 59 34 8 85 60 35 9 61 10 87 62 37 11 35 16 36 17 37 18 .150 (3.81) 19 37 SOCKET 86 36 34 15 88 63 38 12 64 39 13 89 65 40 14 91 66 41 15 92 67 42 16 93 68 43 17 94 69 44 18 95 70 45 19 High Performance Micro-D Connectors and Cables J K M 96 71 46 20 97 72 98 73 48 47 21 P .150 (3.81) 22 99 74 49 23 100 24 Q 75 50 51 25 26 100 SOCKET © 2013 Glenair, Inc. H N .100 (2.54) TYP 90 F L .100 (2.54) TYP 28 9 D G .050 (1.27) TYP 20 C E .100 (2.54) TYP .050 (1.27) TYP 4 17 .050 (1.27) TYP 2.800(71.12B ) CL 29 3 26 CL .100 (2.54) TYP 53 16 35 2.100 (53.34) 20 28 16 .100 (2.54) TYP 1 52 15 .150 (3.81) CL 15 1 Socket #1 27 25 .050 (1.27) .050 (1.27) 78 14 51 34 31 SOCKET Connector Orientation 77 13 50 33 .150 (3.81) 21 SOCKET 76 12 49 32 .100 (2.54) TYP 24 .100 (2.54) TYP .100 (2.54) TYP .050 (1.27) TYP 17 5 48 31 1.500 (38.10) CL 13 11 30 .050 (1.27) TYP 17 15 1.450(36.8) 12 29 47 CL .050 (1.27) 15 SOCKET .050 (1.27) 28 46 1.800 (45.72) CL 11 45 51 SOCKET 1.150 (29.21) 10 44 27 9 SOCKET 9 .100 (2.54) TYP INDEX .050 (1.27) CL .100 (2.54) TYP A U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-9 E-Mail: [email protected]