Micro-D PCB Micro-D MWDM-SMR Surface Mount Right Angle Printed Circuit Board Connectors A Surface Mount Micro-D – These connectors feature .025 inch terminal spacing and an alignment strip for accurate registration. The integral mounting legs provide a ground path. B 9 To 51 Contacts – These compact connectors are lighter and smaller than comparable thru-hole versions. C Mil Spec Reliability – Suitable for mission-critical requirements, These high performance connectors meet the requirements of MIL-DTL-83513. D TwistPin Contact E G Insulator H K L M N P Q Aluminum Shell Socket Contact Epoxy Potting Plastic Alignment Strip Plastic Alignment Strip F J Aluminum Shell Epoxy Potting Integral Mounting Leg Flourosilicone Interfacial Seal Pin Connector Insulator Integral Mounting Leg Socket Connector How To Order Surface Mount PCB Micro-D Connectors Sample Part Number mwdm Series MWDM Glenair Micro-D Shell Material and Finish Aluminum–Shell 1 - Cadmium 4 - Black Anodize 6 - Chem Film Insulator Material 2 - Nickel 5 - Gold 2 l 51-2 P smr p n Stainless Steel Shell 3 - Passivated L – LCP or PPS LCP - 30% Glass-Filled Liquid Crystal Polymer/ PPS - 40% Glass Filled Polyphenylene Sulfide Contact Layout 9, 15, 21, 25, 31, 37, 51-2 (See Table I) Contact Type P - Pin S - Socket Termination Type SMR - Surface Mount Right Angle Jackpost or Jackscrew Option N - Thru-Hole P - Jackpost M - Jackscrew, Hex Head T - Threaded Insert Jackposts for Rear Panel Mounting R1 – .032” Panel R4 – .093” Panel R2 – .047” Panel R5 – .125 Panel R3 – .062” Panel R6 – .080” Panel N - Thru-Hole, No Insert T - Threaded Inserts Board Mounting Threaded Insert Option .160 (4.06) Max INDEX #2-56 Insert © 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-28 E-Mail: [email protected] Micro-D PCB Micro-D MWDM-SMR Surface Mount Right Angle Dimensions Table I: Dimensions A A B C .324 (8.23) B .070 Max C .177 (4.50) D D .094 (2.39) .008±.005 (0.20± 0.08) JACKPOST, THREADED INSERT: #2-56 UNC-2B THREADS THRU-HOLE: .096 ± .005 (2.43 ± 0.13) E F F .224 (5.69) .581 (14.76) G .492 (12.47) .093 ± .005 (2.36 ± 0.13) .200 (5.08) TYP .025 (0.64) TYP 9P 9S 15P 15S 21P 21S 25P 25S B mm. .785 19.94 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.840 1.840 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 46.74 46.74 C Max. D Max. In. ±.005 mm. ± 0.13 In. mm. In. .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.615 1.615 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 41.02 41.02 .333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 1.375 1.444 8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 34.93 36.68 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 F mm. In. ±.003 mm. ± 0.08 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 K L M N P Q INDEX 31P 31S 37P 37S 51-2P 51-2S In. J Ø.008 ± .001 (0.20 ± 0.03) A Max. Layout H © 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-29 E-Mail: [email protected] Micro-D PCB Micro-D MWDM-SMR Surface Mount Right Angle Hardware Surface Mount MICRO-D Hardware Options A N B P R1 Thru R6 C D E F Thru-Hole Standard Jackpost Jackpost for Rear Panel Mounting No jackpost supplied Factory installed with nut and lockwasher Shipped loosely installed. Install with permanent threadlocking compund. G M T T Jackscrew, Hex Drive Threaded Insert Board Mount Threaded Insert Attached with e-ring #2-56 Thread H J K L M N P Q Performance Specifications Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force INDEX © 2013 Glenair, Inc. 1 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 µ Maximum -55° C. to +150° C. 50 g., 20g. (10 Ounces) X (# of Contacts) Materials And Finishes Connector Shell Aluminum Alloy 6061.See Ordering Info for Plating Options Insulators Liquid Crystal Polymer (LCP)/Polyphenylene Sulfide (PPS) Interfacial Seal Pin Contact Socket Contact PCB Terminals Hardware Encapsulant Fluorosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating Gold Plated Copper Alloy, Solder Dipped 300 Series Stainless Steel Epoxy Resin Hysol EE4215 High Performance Micro-D Connectors and Cables U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-30 E-Mail: [email protected] Micro-D PCB Micro-D MWDM-SMR Surface Mount Right Angle PCB Layouts SMR Surface Mount Connector PCB Layouts A FRONT OF CONNECTOR FLANGE Suggested Printed Circuit Board Layout B .025 (0.64) TYP .492(12.47) 5 9 4 8 3 7 2 6 1 .017 (0.43) D Ø.093 (2.36) A 1 6 2 7 3 8 4 9 5 Pin 15 Contacts Socket Layout 8 15 7 14 6 13 5 12 4 11 3 10 2 9 1 9 15 21 1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 Pin 25 31 37 51-2 Socket 21 Contacts 11 21 10 20 9 19 8 18 7 17 6 16 5 15 4 14 3 13 2 12 1 A In. .565 .715 .865 .965 1.115 1.265 1.615 B mm. 14.35 18.16 21.97 24.51 28.32 32.13 41.02 In. .200 .350 .500 .600 .750 .900 1.250 mm. 5.08 8.89 12.70 15.24 19.05 22.86 31.75 1 12 2 13 3 14 4 15 5 16 6 17 7 18 8 19 9 20 10 21 11 Pin 13 25 12 24 11 23 10 22 9 21 8 20 7 19 6 18 5 17 4 16 3 15 2 14 1 Pin 1 17 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26 11 27 12 28 13 29 14 30 15 31 16 M N Socket 19 37 18 36 17 35 13 16 34 15 33 14 32 13 31 12 30 11 29 10 28 9 27 8 26 7 25 6 24 5 23 4 22 3 21 2 20 1 P 1 20 2 21 3 22 4 23 5 24 6 25 7 26 8 27 9 28 10 29 11 30 12 31 13 32 14 33 15 34 16 13 35 17 36 18 37 19 Pin Socket Q INDEX 26 51 25 50 24 49 23 48 22 47 21 46 20 45 19 44 18 43 17 42 13 16 41 15 40 14 39 13 38 12 37 11 36 10 35 9 34 8 33 7 32 6 31 5 30 4 29 3 28 2 27 1 1 27 2 28 3 29 4 30 5 31 6 32 7 33 8 34 9 35 10 36 11 37 12 38 13 39 14 40 15 41 13 16 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25 51 26 Pin © 2013 Glenair, Inc. H L Pin 51 Contacts G 16 31 15 30 14 29 13 28 12 27 11 26 10 25 9 24 8 23 7 22 6 21 5 20 4 19 3 18 2 17 1 Socket 37 Contacts F K 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 13 31 Contacts E J Socket 25 Contacts B C .160 (4.06) .012 (0.30 Socket 9 Contacts .174 (4.42) High Performance Micro-D Connectors and Cables U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-31 E-Mail: [email protected]