Micro-D MIL-DTL-83513 Type 240-034 PCB Micro-D Filter Connectors Right Angle Right Angle Board Mount Filtered Micro-D's. These connectors feature low-pass EMI filtering in a right angle header for PCB termination. Key Featuresinclude gold plated TwistPin contacts, machined aluminum shells, and either Pi or C filter elements. These environmentally sealed connectors are designed to meet the requirements of MIL-DTL-83513. .100" x .100" Board Spacing- These connectors are similar to “CBR” style Micro-D's and share the same board footprint, allowing retrofit to existing boards. D How To Order Micro-D Filtered Right Angle PCB Connectors Sample Part Number 240-034 Series -2 -37 S P E PU -.080 240-034 Aluminum Shell Stainless Steel Shell 1 - Cadmium 2 - Nickel 3 - Passivated 4 - Black Anodize 5 - Gold 6 - Chem Film 9, 15, 21, 25, 31, 37 (See Table II) P - Pin S - Socket C - C Filter P - Pi Filter (See Table I) A, B, C,D, E, F, G, J (See Table I) PCB Hardware Options Rear Panel Jackposts with Threaded Inserts NN - No Jackpost, No Threaded Insert R6U - 0.125” (3.2) Panel PN - Jackpost, No Threaded Insert R5U - 0.094” (2.4) Panel NU - Threaded Insert Only, No Jackposts R4U - 0.062” (1.6) Panel PU - Jackpost and Threaded Insert R3U - 0.047” (1.2) Panel R2U - 0.031” (0.8) Panel .080 .110 .125 .150 .190 .250 Length in Inches ± .015(0.38) Shell Finish Contact Layout Contact Type Filter Type Filter Class Hardware PC Tail Length Table I: Micro-D Filter Classes and Performance Filter Class A B C Filter Pi Filter 19000-28000 38000-56000 16000-22500 32000-45000 © 2013 Glenair, Inc. C D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000 E F G J 1650-2500 3300-5000 400-650 800-1300 200-300 400-600 35–60 70–120 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-18 E-Mail: [email protected] Micro-D MIL-DTL-83513 Type 240-034 PCB Micro-D Filter Connectors Right Angle Table II: Dimensions A B C E D TAIL TAILLENGTH LENGTH± .015 ±.015(0.38) (0.38) #2-56 UNC-2B THREADS D PI FILTER FILTER1.205 1.140(30.61) (28.96)MAX MAX. C FILTER FILTER.865 .840(21.97) (21.34) MAX. MAX PI FILTER 1.300 (33.02) MAX C FILTER .960 (24.38) MAX F H H CONFIGURATION FOR 9-25 CONTACTS CONFIGURATION FOR 31-37 CONTACTS J J K K 2X MOUNTING HOLES.096 DIA. ± .003 (2.44 ± 0.08) OR OPTIONAL 2-26 UNC 2B THREADED INSERTS C Filter A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S B C Max. In. mm. In. mm. ±.003 ± 0.08 .785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 19.94 19.94 23.75 23.75 27.56 27.56 30.10 30.10 33.91 33.91 37.72 37.72 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 © 2013 Glenair, Inc. D Max. E Max. F K Max. H Pi Filter J H J mm. In. mm. In. mm. In. mm. ±.004 ± 0.10 In. mm. In. mm. In. mm. In. mm. In. mm. ±.010 ±0.25 ±.010 ±0.25 ±.010 ±0.25 ±.010 ±0.25 14.35 .333 8.46 14.35 .400 10.16 18.16 .483 12.27 18.16 .551 14.00 21.97 .633 16.08 21.97 .701 17.81 24.51 .733 18.62 24.51 .801 20.35 28.32 .883 22.43 28.32 .951 24.16 32.13 1.033 26.24 32.13 1.101 27.96 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .335 .335 .335 .335 .335 .335 .335 .335 .430 .430 .430 .430 8.51 8.51 8.51 8.51 8.51 8.51 8.51 8.51 10.92 10.92 10.92 10.92 .440 .440 .340 .340 .340 .340 .340 .340 .340 .340 .340 .340 In. 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 11.18 11.18 8.64 8.64 8.64 8.64 8.64 8.64 8.64 8.64 8.64 8.64 .460 .460 .460 .460 .460 .460 .460 .460 .460 .460 .460 .460 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 11.68 .740 .740 .640 .640 .640 .640 .640 .640 .640 .640 .640 .640 18.80 18.80 16.26 16.26 16.26 16.26 16.26 16.26 16.26 16.26 16.26 16.26 .760 .760 .760 .760 .760 .760 .760 .760 .760 .760 .760 .760 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 19.30 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-19 E-Mail: [email protected] Micro-D MIL-DTL-83513 Type 240-034 PCB Micro-D Filter Connectors Right Angle Micro-D Jackpost options NN/NU PN/PU R2U Thru R6U Panel HEX NUT EPOXY FILL Thru-Hole: For use with Glenair jackposts only. Order Standard Jackpost: Factory Jackpost for Rear Panel Mounting: Shipped loosely CONNECTOR CONNECTOR hardware separately. Install w/ threadlocking compound. installed, not intended for removal. installed. Install w/ permanent FLANGE FLANGE threadlocking compound. .020 (0.51) .100 (2.54) CL Micro-D Filter Right Angle PCB Layouts — Pin Connector CONNECTOR .108 (2.74) FLANGE .100 (2.54)TYP PC Tail Diameter .018 ± .002 (0.46 ± 0.05) .083 (2.11) D 2 .020 (0.51) .100(2.11) (2.54) .083 1 2 4 5 1 .100 (2.54) .100 (2.54) 7 9 .108 (2.74) 10 2 .565 (14.35) 1 .100 (2.54) 2 6 7 4 5 3 9 9 .050 (1.27)TYP .083 (2.11) .100 (2.54) 2 .083 (2.11) 1 .100 (2.54) 14 2 13 12 .100 (2.54) .100 (2.54) .083 (2.11) 3 1 12 14 1 .100 (2.54) .100 (2.54) 2 15 1 3 14 13 1 17 7 19 20 5 6 8 10 17 16 7 18 .050 (1.27)TYP 5 9 19 8 CL 9 7 24 823 11 10 925 21 21 13 12 .100 (2.54) .100 (2.54) .083 (2.11) 14 .020 (0.51) 31 CONTACTS 9 26 11 28 13 31 15 .020 (0.51) 1 17 © 2013 Glenair, Inc. 19 18 GLENAIR, INC. 21 20 23 22 5 7 12 6 13 26 8 14 .020 (0.51) 15 .050 (1.27)TYP 12 14 CONNECTOR FLANGE 6 CL 8 5 418 7 16 2 3 8 20 28 11 22 12 24 13 9 22 .965 (24.51) 7 21 24 13 12 5 20 FLANGE .050 (1.27)TYP 4 6 8 10 11 .965 (24.51) 17 9 22 25 CONTACTS 18 19 .020 (0.51) 10 CONNECTOR 11 12 21 23 25 25 16 19 CONNECTOR FLANGE 23 15 18 10 9 6 19 20 1 3 2 5 4 322 2 21 20 9 CL 11 7 21 24 23 .020 (0.51) 13 .020 (0.51) 25 6 524 8 726 10 928 CONNECTOR FLANGE 13 12 11 29 15 14 13 31 17 16 19 18 15 17 37 19 33CONNECTOR 35 .020 (0.51) FLANGE 6 827 CL10 30 12 32 14 34 16 36 18 25 .050 (1.27)TYP 24 26 1.265 28 (32.13) 29 31 33 35 37 423 22 .020 (0.51) 37 CONTACTS 11 30 13 32 15 34 17 36 19 1 21 3 23 5 25 7 27 9 16 .100 (2.54) 2 .050 (1.27)TYP 1.265 (32.13) 4 6 8 10 12 .020 (0.51) Dimensions change without 22 24 26 notice. 28 29 25 27 29 in30inches (millimeters) and are subject to 20 U.S. CAGE Code 06324 .050 (1.27)TYP • 1211 AIR 1.115 (28.32) www.glenair.com 4 .020 (0.51) 15 .050 (1.27)TYP CONNECTOR .965 (24.51) FLANGE CL 1 20 .100 (2.54) .100 (2.54) .158 (4.01) 17 14 1 .158 .100 (2.54) (4.01) 2 18 4 20 6 22 8 .100 (2.54) 14 15 .050 17 (1.27)TYP 5 CL7 14 .158 .183 (4.01) (4.65) .100 (2.54) FLANGE .050 (1.27)TYP 1.115 (28.32) 3 5 7 24 10 13 11 4 3 16 .100 (2.54) 16 5 722 CL24 10 12 31 14 16 20 26 28 .158 .050(4.01) (1.27)TYP 19 21 1.115 23 (28.32) 25 27 29 30 15 1 .100 (2.54) .020 (0.51) 15 11 13 27 CONNECTOR 29 15 30 3 2 14 11 20 CONNECTOR FLANGE 3 18 17 .020 (0.51) CONNECTOR FLANGE .865 (21.97) CL 621 11 1 .100 (2.54) .020 (0.51) FLANGE 9 2 .083 (2.11) 11 18 4 6 419 9 21 CONTACTS 15 .100 (2.54) 10 16 .865 (21.97) 11 .050 (1.27)TYP L .083 (2.11) 6 CONNECTOR 8 10 21 18 19 20 .865 C(21.97) L .158 (4.01) 3 8 7 .020 (0.51) 15 CONTACTS C .100 (2.54) CONNECTOR FLANGE .050 (1.27)TYP 4 172 .100 (2.54) .100 (2.54) 4 .158 (4.01) .100 (2.54) 17 5 16 .050 (1.27)TYP 13 12 6 CL 4 3 15 2 .100 (2.54) 5 8 .715 (18.16) CONNECTOR FLANGE 9 CONTACTS CL .100 (2.54) 6 411 13 5CONNECTOR 7 14 15 .050 (1.27)TYP FLANGE 3 C12 6 8 L .715 (18.16) 3 10 .565 (14.35) 7 12 .715 (18.16) 1 .100 (2.54) 8 CONNECTOR FLANGE 4 CL 5 3 2 10 9 .565 (14.35) CL3 8 9 .050 .100 (1.27)TYP (2.54)TYP 6 .083 (2.11) 5 Patterns .100 (2.54)TYP 7 CONNECTOR 3 8 9 .050FLANGE (1.27)TYP 6 .100 (2.54) .020 (0.51) .100 (2.54) Contact numbers shown are for pin connectors. 1 (2.54)of PC board. shown are for connector mounting side .108.100 (2.74) C 2 L 4 1 CL 21 31 WAY • GLENDALE, CA 91201-2497 D-20 23 25 27 30 14 31 16 33 32 .050 (1.27)TYP • 818-247-6000 1.265 (32.13) 18 35 34 37 36 .020 (0.51) Printed in U.S.A. • FAX 818-500-9912 E-Mail: [email protected] Micro-D MIL-DTL-83513 Type 240-034 PCB Micro-D Filter Connectors Right Angle Micro-D Filter Right Angle PCB Layouts — Socket Connector PC Tail Diameter .018 ± .002 (0.46 ± 0.05) Contact numbers shown are for socket connectors. Patterns shown are for connector mounting side of PC board. CONNECTOR FLANGE .020 (0.51) .100 (2.54) CL .083 (2.11) 5 4 9 8 2 7 8 .100 (2.54) 1 3 7 15 6 .050 (1.27)TYP 11 .100 (2.54) 21 9 20 5 7 3 17 19 18 12 2 4 14 16 13 .100 (2.54) 1 13 15 .050 (1.27)TYP 12 .020 (0.51) 11 24 25 .158 (4.01) 15 .100 (2.54) 16 13 14 30 11 12 29 31 28 10 8 6 7 23 4 5 21 22 .050 (1.27)TYP 1.115 (28.32) 21 6 7 20 4 5 19 3 2 17 18 15 16 1 .020 (0.51) 14 CONNECTOR FLANGE CL .100 (2.54) 3 19 20 19 2 1 17 .020 (0.51) 17 18 .100 (2.54) 37 15 16 35 36 18 31 CONTACTS © 2013 Glenair, Inc. 8 9 25 CONTACTS CONNECTOR FLANGE 24 25 26 CONNECTOR FLANGE .158 .183 (4.01) (4.65) 9 27 .020 (0.51) 9 .050 (1.27)TYP .965 (24.51) 21 CONTACTS CL 10 22 23 .865 (21.97) .100 (2.54) D 1 10 CL .083 (2.11) 6 3 11 .050 (1.27)TYP .100 (2.54) CL 8 12 13 2 15 CONTACTS CONNECTOR FLANGE 10 4 .715 (18.16) 9 CONTACTS .083 (2.11) 5 6 14 .565 (14.35) .100 (2.54) CONNECTOR FLANGE .108 (2.74) .100 (2.54)TYP .100 (2.54) CL 13 14 33 34 11 12 31 32 9 10 29 7 8 28 30 5 6 26 27 .050 (1.27)TYP 1.265 (32.13) 3 4 24 25 1 2 22 23 20 .020 (0.51) 21 37 CONTACTS Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-21 E-Mail: [email protected]