Series 79 90° PCB Connectors 790-036P Right Angle PCB Terminated Panel Mount Receptacle, Pin Contacts How To Order 790-036P Right Angle PCB Panel Mount Receptacles PIN CONTACTS WITH RIGHT ANGLE PCB TERMINATION Lightweight, rugged right angle headers feature gold-plated contacts for thruhole printed circuit board termination. 790-036P connectors are designed for rear-panel mounting and are supplied with conductive panel gaskets. Contacts are permanently installed and are sealed with epoxy. Shells are aluminum alloy. Threaded board mounting holes and integral standoffs simplify installation. EMI shroud improves EMI performance. Fluorosilicone face seal provides watertight interface. Available in 29 different contact arrangements, these connectors feature size #23 signal contacts along with #16 and #12 power contacts for up to 23 amps current rating. HOW TO ORDER Sample Part Number 790-036P D-7P2 MT P A Part Number Shell Size Insert Arrangements Shell Finish Hardware Option PC Tail Length 790-036P Rear-Panel Mounted Receptacle with 90° PC Tail Pin Contacts for Termination to Backplanes or Flexible Circuits See Table 1 for Available Insert Arrangements M A Electroless Nickel .125 Inch (3.2 mm.) N general purpose applications No Hardware MT Nickel-PTFE 1000 Hour Grey™ maximum corrosion protection and durability (non-reflective grey) G Guide Pin PC TAIL LENGTH ZNU Zinc-Nickel with Black Chromate tactical applications (non-reflective black) B .250 inch (6.4 mm.) P Female Jackpost G Additional shell finishes are listed on page C-9. S Female Guide Socket SPECIFICATIONS Current Rating Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration MATERIALS AND FINISHES #23 5 AMPS, #16 13 A., #12 23 A. #23 500 VAC RMS, #12 and #16 1800 VAC RMS 5000 megohms minimum -65° C. to +150° C. 300 g. 37 g. Shell Contacts Insulator Interfacial Seal Hardware Panel Gasket Encapsulant Aluminum alloy Copper alloy, 50 microinches gold plated Liquid crystal polymer (LCP) Flourosilicone rubber 300 series stainless steel Fluorosilicone, conductive Epoxy Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] G-1 www.glenair.com Series 79 90° PCB Connectors 790-036P Right Angle PCB Terminated Panel Mount Receptacle, Pin Contacts How To Order Table I Contact Arrangements Layout A-5 Contact Quantity #23 #16 #12 5 B-2P2 9 C-13 13 D-15 15 D-3P3 Face View LCP INSULATOR EMI GASKET .025 (0.64) CONTACT PIN EMI COVER LCP TRAY 3 D-7P2 5 2 E-11P2 9 2 E-19 19 E-7P3 4 3 F-15P2 13 2 F-23 23 F-5P5 INTERFACIAL SEAL .007 (0.18) TABLE 2 HARDWARE OPTION 5 G-33 33 H-10P4 6 H-29P7 22 4 7 H-36P2 34 H-54P2 52 2 2 H-5P5 G .195 (4.95) EPOXY 2 B-9 CROSS-SECTIONAL VIEW OF 790-036P 5 H-66 66 J-17P4 13 4 J-25P2 23 2 J-33 33 J-7P7 N P No Mating Hardware Jackposts Connector is supplied with blind, tapped holes. Shell sizes H and L have 6-32 UNC-2B thread, other sizes are #4-40. Minimum thread depth is .150" (3.81). Connector is supplied with nonremovable jackposts. Shell sizes H and L have #4-40 UNC-2B thread, other sizes have #2-56 thread. 7 K-27P4 23 4 K-35P2 33 2 K-43 43 K-9P9 9 L-6P6 6 L-78 78 M-102 102 G S Male Guide Pins Female Guide Sockets Connector is supplied with stainless steel guide pins to mate with code S guide sockets. Pins are non-removable. Connector is supplied with stainless steel guide sockets to mate with code G guide pins. Sockets are non-removable. Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-2 Series 79 90°°° PCB Connectors 790-036P Right Angle PCB Terminated Panel Mount Receptacle, Pin Contacts Dimensions 790-036P Shell Sizes A-F, J and K Dimensions BLIND MATE A MAX .228 (5.79) MIN B BASIC .308 (7.82) MAX C BASIC D MAX SHELL SIZES A, B, C, D, E, F, G, J, K +/- .030 (0.76) ALLOWABLE MISALIGNMENT FROM CENTERLINE .078 (1.98) MIN .500 (12.70) MAX 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES JACKPOST SHOWN FOR REFERENCE. .170 (4.32) .335 (8.51) MAX 435 (11.05) MAX 2-56 UNC-2B 2 PLACES PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) .560 (14.22) MAX CONTACT TAIL DIA #23 CONTACT .018/.022 (0.46/0.56) #16 CONTACT .060/.064 (1.52/1.63) C BASIC E MAX G 790-036P SHELL SIZES A-F, J AND K Shell Size A B C D E F J K A Max. In. mm. B Basic In. mm. C Basic In. mm. D Max. In. mm. E Max. In. mm. 1.211 1.361 1.511 1.611 1.761 30.76 34.57 38.38 40.92 44.73 .925 1.075 1.225 1.325 1.475 23.50 27.31 31.12 33.66 37.47 .565 .715 .865 .965 1.115 14.35 18.16 21.97 24.51 28.32 .401 .551 .701 .801 .951 10.19 14.00 17.81 20.35 24.16 .805 .955 1.105 1.205 1.355 20.45 24.26 28.07 30.61 34.42 1.911 2.261 2.661 48.54 57.43 67.59 1.625 1.975 2.375 41.28 50.17 60.33 1.265 1.615 2.015 32.13 41.02 51.18 1.101 1.460 1.860 27.96 37.08 47.24 1.505 1.855 2.255 38.23 47.12 57.28 Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] G-3 www.glenair.com Series 79 90° PCB Connectors 790-036P Right Angle PCB Terminated Panel Mount Receptacle, Pin Contacts Dimensions 790-036P Shell Size G Dimensions 1.855 (47.12) MAX .228 (5.79) MIN 1.575 (40.01) BASIC 1.215 (30.86) BASIC .078 (1.98) MIN .387 (9.83) MAX 1.079 (27.41) MAX .620 (15.75) MAX 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES JACKPOST SHOWN FOR REFERENCE. .170 (4.32) .335 (8.51) MAX .510 (12.95) TYP 2-56 UNC-2B 2 PLACES .018/.022 (0.46/0.56) PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) .630 (16.00) MAX 1.215 (30.86) BASIC 1.450 (36.83) MAX BLIND MATE G SHELL SIZES A, B, C, D, E, F, G, J, K +/- .030 (0.76) ALLOWABLE MISALIGNMENT FROM CENTERLINE Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-4 Series 79 90°°° PCB Connectors 790-036P Right Angle PCB Terminated Panel Mount Receptacle, Pin Contacts Dimensions 790-036P Shell Sizes H and L Dimensions #2-56 FLAT HEAD SCREW #2-56 FLATHEAD SCREW 790-036P SHELL SIZES H AND L Shell Size H L MAX FF MAX BASIC GGBASIC BASIC HHBASIC JJ .170 (4.32) .170 (4.32) 4-40 .150 (3.81) 4-40UNC-2B UNC-2B X X .150 (3.81) MIN MIN PLACES 2 2PLACES H Basic In. mm. J Max. In. mm. K Max. In. mm. 2.500 63.50 2.736 69.49 2.236 56.79 2.472 62.79 1.800 45.72 2.036 51.71 1.450 36.83 1.686 42.82 2.175 55.25 2.411 61.24 .288 (6.05) PC TAIL LENGTH PC TAIL LENGTH ± .020 (0.51) ±.020 (0.51) CODE A: .125 (3.18) CODE .125 (3.18) CODE B:A: .250 (6.35) CODE B: .250 (6.35) CONTACT TAILTAIL DIA DIA. CONTACT #23 CONTACT .018/.022 (0.46/0.56) #23 CONTACT 0.18/.022 #16 CONTACT .060/.064 (1.52/1.63)(0.46/0.56) #12 CONTACT .096/.092 (2.44/2.34)(1.52/1.63) #16 CONTACT .060/.064 #12 CONTACT .096/.092 (2.44/2.34) JACKPOST JACKPOST SHOWN SHOWN FOR FOR REFERENCE REFERENCE. .5075 (12.89) .700 (17.78) (17.78) .700 TYP MAX .300 (7.62) .300 (7.62) MAX MAX 4-40UNC-2B UNC-2B 4-40 PLACES 2 2PLACES G Basic In . mm. MIN MIN .288 (6.05) .088 .088 (2.24) (2.24) .415 (10.54) .415 (10.54) MAX MAX .620 .620 (15.75) (15.75) MAX MAX .320 .320(8.13) (8.13) MAX MAX F Max. In. mm. BLIND MATE SHELL SIZES H, L +/- .040 (1.02) ALLOWABLE MISALIGNMENT FROM CENTERLINE BASIC HHBASIC MAX KK MAX 790-036P Shell Size M Dimensions 2X #2-56 FLATHEAD SCREW 3.085 (78.36 MAX) 2.770 (70.36) BASIC 2.200 (55.88) BASIC 1.745 (44.32) MAX .5825 (14.80) BASIC 2X 6-32 UNC-2B X .150 (3.81) MIN .078 (1.98) .350 (889) MAX .170 (4.32) .680 (17.27) MAX .470 (11.94) MAX GUIDE PIN SHOWN FOR REFERENCE .250 (6.35) MIN PC TAIL LENGTH ±.020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) .018/.022 (0.46/0.56) .350 (889) MAX BLIND MATE .775 (19.69) MAX © 2011 Glenair, Inc. SHELL SIZE M +/- .050 (1.27) ALLOWABLE MISALIGNMENT FROM CENTERLINE 2X 4-40 UNC-2B 2.200 (55.88) BASIC 2.575 (65.41) MAX Dimensions in Inches (millimeters) are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] G-5 www.glenair.com G