MIL-DTL-38999 Series III Type 180-091 (H7) Square Flange Wall Mount Receptacle Advanced Fiber Optic Connector MIL-DTL-38999 Series III Type with Standard (Round) Holes D38999 Series III B MIL-DTL-38999 type advanced fiber optic receptacle connector How To Order Shell Size (Table I) Material/Finish (Table II) Product Series 180 - 091 XW H7 - 17 - 8 Basic No. H7 = Wall Mount Receptacle with Standard Holes 2X C BSC Insert Designation P = Pin S = Socket P Insert Arrangement (See Page B-12) Master Keyway A Thread N Alternate Key Position per MIL-DTL-38999 A, B, C, D, or E N = Normal 1.240 (31.5) Max H G B SQ 4 x ØK Holes .510 (13.0) Max Full Mate Indicator J Thread Yellow Color Band Blue Color Band Red Color Band Full Mate Indicator H7 - SQUARE FLANGE WALL MOUNT RECEPTACLE WITH STANDARD (ROUND) HOLES Material and Finish Shell: See Table II Insulator: High Grade Rigid Dielectric Seals: Fluorosilicone Notes Insert arrangement in accordance with MIL-STD-1560, See Page B-12. Blue Color Band indicates rear release retention system. For appropriate Glenair Terminus part numbers, see Glenair Drawing 181-001 and 181-002. For recommended panel cutout, See Page B-13 © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-20 E-Mail: [email protected] MIL-DTL-38999 Series III Type 180-091 (H7) Square Flange Wall Mount Receptacle Advanced Fiber Optic Connector MIL-DTL-38999 Series III Type with Standard (Round) Holes Shell Size Code Shell Size A Thread B 11 .7500-.1P-.3L-TS-2A C 13 .8750-.1P-.3L-TS-2A D 15 1.0000-.1P-.3L-TS-2A E 17 1.1875-.1P-.3L-TS-2A F 19 1.2500-.1P-.3L-TS-2A G 21 1.3750-.1P-.3L-TS-2A H 23 1.5000-.1P-.3L-TS-2A J 25 1.6250-.1P-.3L-TS-2A B SQ 1.043 (26.5) 1.019 (25.9) 1.138 (28.9) 1.114 (28.3) 1.232 (31.3) 1.208 (30.7) 1.323 (33.6) 1.299 (33.0) 1.449 (36.8) 1.425 (36.2) 1.575 (40.0) 1.551 (39.4) 1.701 (43.2) 1.677 (42.6) 1.823 (46.3) 1.799 (45.7) Table I C BSC .812 (20.6) .906 (23.0) .969 (24.6) 1.062 (27.0) 1.156 (29.4) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) G .144 (3.7) .083 (2.1) .144 (3.7) .083 (2.1) .144 (3.7) .083 (2.1) .144 (3.7) .083 (2.1) .144 (3.7) .083 (2.1) .171 (65.2) .083 (39.8) .171 (65.2) .083 (39.8) .171 (65.2) .083 (39.8) H .823 .768 .823 .768 .823 .768 .823 .768 .823 .768 .791 .736 .791 .736 .791 .736 (20.9) (19.5) (20.9) (19.5) (20.9) (19.5) (20.9) (19.5) (20.9) (19.5) (20.0) (18.7) (20.0) (18.7) (20.0) (18.7) J Thread M15 x 1.0-6g 0.100R M18 x 1.0-6g 0.100R M22 x 1.0-6g 0.100R M25 x 1.0-6g 0.100R M28 x 1.0-6g 0.100R M31 x 1.0-6g 0.100R M34 x 1.0-6g 0.100R M37 x 1.0-6g 0.100R ØK Holes .136 (3.5) .120 (3.0) .136 (3.5) .120 (3.0) .136 (3.5) .120 (3.0) .136 (3.5) .120 (3.0) .136 (3.5) .120 (3.0) .136 (3.5) .120 (3.0) .162 (4.1) .146 (3.7) .162 (4.1) .146 (3.7) Table II: Material and Finish Code M MT NF ZN ZNU XM XMT XW XZN MS ZL Z1 Material Aluminum Alloy Composite Stainless Steel Finish Description Electroless Nickel Nickel - PTFE, Grey Cadmium, Olive Drab Zinc-Nickel, Olive Drab Zinc-Nickel, Black Electroless Nickel Nickel - PTFE, Grey Cadmium, Olive Drab Zinc-Nickel, Black Electroless Nickel Electro-Deposited Nickel Passivate Refer to Appendix for material/finish details © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-21 E-Mail: [email protected] B