Shielded Contacts M39029/77 852-009 Size 16 Coaxial Socket D38999 Ser. I, III, IV Size #16 Coaxial Socket Contacts for MIL-DTL-38999 Series I, III and IV Connectors These #16 socket contacts accept 50 ohm and 75 ohm coaxial cable. Inner contact is rated at 1 amp, the outer contact 12 amps. DWV rating is 800 Vac rms sea level, 250 Vac at 50,000 feet. Contacts are packaged individually and are unassembled with instruction sheet. One contact consists of outer contact , fluorocarbon dielectric, inner contact and shield crimp sleeve. Inner and outer contacts are gold-plated copper alloy. Approved to SAE AS39029. VSWR rating 1.5:1 maximum up to 700 MHz. 5000 megohm insulation resistance. Mates with: M39029/76. B .896 Max Outer Contact Mates with .0635/.0615 Pin (Spring Design Optional) .626 .620 X .585 Min R .003 Max Shield Crimp Sleeve ØF ØG After Crimp ØZ R .002 Min * 47° 43° ØD ØC Outer Contact Barrel N P .063 Min Thru One Wall Only R .020 .013 Radial Location Optional U 47°/43° 32 S T K Spherical Radius ØH ØJ ØL R ØA Max ØB Inner Pin Contact .166 Min Depth ØE BIN Color Bands (See Table) ØM .033 .029 ØV ØW Shield Crimp Sleeve Inner Pin Contact Material and Finish Contact Body: Copper Alloy/Gold Plated Hood: Stainless Steel/Passivated Center Contact: Copper Alloy/Gold Plated Crimp Sleeve: Copper Alloy/Gold Plated Insulator: Teflon *Indicates point at which a square ended pin of the same basic diameter as the mating contact first engages the outer contact spring © 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-18 www.glenair.com Shielded Contacts M39029/77 852-009 Size 16 Coaxial Socket Type Socket Color Band 2nd 3rd Military Part Number 1st M17/119-RG174, M17/113-RG316, M17/094-RG179, Times AA3248, Teledyne 11299, Haveg 8100207, Thermax 75-738-BCCWXE, 852-009-16-428 Tensolite 30888/L707YX-1 M39029/77-428 Yellow Red Gray M17/093-RG178 Haveg 61-02051, Revere WH95623 852-009-16-429 852-009-16-430 M39029/77-429 M39029/77-430 Yellow Yellow Red Orange White Black Haveg 30-00761, Haveg 30-02024, Haveg 30-02033, Tensolite 24713/A955KK1, Tensolite 26723/A955KK1 852-009-16-431 M39029/77-431 Yellow Orange Brown Cable Accommodation Part Number B Table I BIN Code 428 429 430 431 ØA Max ØB ØD Min ØC .068 (1.73) .065 (1.65) .068 (1.73) .113 (2.9) .065 (1.65) .068 (1.73) .113 (2.9) .065 (1.65) .068 (1.73) .113 (2.9) .065 (1.65) .113 (2.9) .089 (2.3) .084 (2.1) .089 (2.3) .084 (2.1) .089 (2.3) .084 (2.1) .089 (2.3) .084 (2.1) .670 (17.0) 0.575 (14.6) .670 (17.0) 0.575 (14.6) ØG Max ØE ØF .103 (2.62) .101 (2.57) .103 (2.62) .101 (2.57) .103 (2.62) .101 (2.57) .103 (2.62) .101 (2.57) .130 (3.3) .127 (3.2) .130 (3.3) .127 (3.2) .130 (3.3) .127 (3.2) .130 (3.3) .127 (3.2) .108 (2.7) .108 (2.7) .108 (2.7) .108 (2.7) ØH Min .105 (2.7) .094 (2.4) .105 (2.7) .094 (2.4) ØJ Max .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) K ØL Min .105 (2.7) .095 (2.4) .105 (2.7) .095 (2.4) .105 (2.7) .095 (2.4) .105 (2.7) .095 (2.4) .0210 (0.5) .0210 (0.5) .0355 (0.9) .0270 (0.7) Table I (continued) BIN Code 428 429 430 431 ØM Max N Min .046 (1.2) .046 (1.2) 0.052 (1.3) .046 (1.2) .103 (2.6) .103 (2.6) .103 (2.6) .103 (2.6) P R .094 (2.4) .125 (3.2) .087 (2.2) .119 (3.0) .094 (2.4) .125 (3.2) .087 (2.2) .119 (3.0) .094 (2.4) .125 (3.2) .087 (2.2) .119 (3.0) .094 (2.4) .125 (3.2) .087 (2.2) .119 (3.0) ØZ Max S T U Ref ØV ØW X .079 (2.0) .073 (1.9) .079 (2.0) .073 (1.9) .079 (2.0) .073 (1.9) .079 (2.0) .073 (1.9) .269 (6.83) .266 (6.76) .269 (6.83) .266 (6.76) .269 (6.83) .266 (6.76) .269 (6.83) .266 (6.76) .3895 (9.9) .3895 (9.9) .3895 (9.9) .3895 (9.9) .030 (0.8) .028 (0.7) .030 (0.8) .028 (0.7) .030 (0.8) .028 (0.7) .030 (0.8) .028 (0.7) .611 (15.5) .601 (15.3) .611 (15.5) .601 (15.3) .611 (15.5) .601 (15.3) .611 (15.5) .601 (15.3) .0155 (.39) .0145 (.37) .0155 (.39) .0145 (.37) .0155 (.39) .0145 (.37) .0155 (.39) .0145 (.37) .085 (2.2) .076 (1.9) .085 (2.2) .076 (1.9) Table III Inner Contact Basic Crimping Tool M22520/2-01 © 2011 Glenair, Inc. Positioner M22520/2-35 Outer Contact Basic Crimping Tool M22520/4-01 Positioner M22520/4-02 Insertion Tool Extraction Tool M81969/8-07 or M81969/14-03 M81969/8-08 or M81969/14-03 CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-19 www.glenair.com