Series 75 Metal-Core Conduit 712-386 Legacy MIL-C-24758 (Superseded) Environmental EMI/RFI Conduit to Connector Backshell for Series 75 Metal-Core Conduit Legacy MIL-C-24758 conduit-to-connector backshell (Superseded by MIL-PRF24758A [SH]) How To Order Product Series 712 Angle: J = 90° H = 45° S = Straight F S Connector Designator A, F, H, or L (Table I, Intro) G/G1 Material/ Finish (Table II) 386 M Basic No. Dash No. (Table IV) 16 B Shell Size (Table III) 45° D 12 - 6 Conduit Type (Table V) Optional length in 1/2 inch increments symbol S only. (e.g. 6=3.00 in.) H/H1 Length O-Ring Typ E SYM H - 45° Cone Length Typ A Thread Typ (Table I, Intro) ØC (Table I, Intro) J/J1 Conduit I.D. ØF Typ SYM S - Straight Material/Finish K/K1 • Adapters, Elbows, Coupling Nuts, Nuts, Ring: See Table II • O-Rings: Silicone/NA Notes SYM J - 90° © 2012 Glenair, Inc. • O-Ring not supplied with connector designator A • F dimension is based on type A conduit. Add .125 (3.2) to listed dimensions for additional shield types B or D. • When tubing I.D. max exceeds inside diameter of connector shell, style 2 will be supplied. Refer to pages A-32 – A-33 . U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-40 E-Mail: [email protected] Series 75 Metal-Core Conduit 712-386 Legacy MIL-C-24758 (Superseded) Environmental EMI/RFI Conduit to Connector Backshell for Series 75 Metal-Core Conduit Table III: Shell Size/Dimensions Shell Size A,F,L H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 32 36 40 44 48 61 Length Style 2 (Straight) .88 (22.4) Max Dash No Conduit I.D. Style 2 (45° & 90°) E G Max H Max J Max K Max .639 (16.2) .654 (16.6) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) 1.041 (26.4) 1.092 (27.7) 1.138 (28.9) 1.184 (30.1) 1.235 (31.4) 1.287 (32.7) 1.003 (25.5) 1.700 (43.2) 1.730 (43.9) 1.750 (44.5) 1.780 (45.2) 1.800 (45.7) 1.810 (46.0) 2.020 (51.3) 2.060 (52.3) 2.090 (53.1) 2.320 (58.9) 2.360 (59.9) 2.410 (61.2) 2.450 (62.2) 2.500 (63.5) 2.550 (64.8) 2.270 (57.7) .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) 1.720 (43.7) 1.830 (46.5) 1.950 (49.5) 2.080 (52.8) 1.390 (35.3) 1.810 (46.0) 1.870 (47.5) 1.930 (49.0) 2.000 (50.8) 2.060 (52.3) 2.080 (52.8) 2.390 (60.7) 2.470 (62.7) 2.540 (64.5) 2.780 (70.6) 2.870 (72.9) 2.960 (75.2) 3.070 (78.0) 3.200 (81.3) 3.320 (84.3) 2.380 (60.5) Table IV Dash No./Dimensions Ø F Max G1 Max H1 Max J1 Max K1 Max 08 .250 (6.4) .75 (19.1) 1.16 (29.5) .639 (16.2) 1.700 (43.2) .750 (19.1) 1.810 (46.0) 12 16 20 24 32 40 48 56 64 80 96 .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) .75 (19.1) .75 (19.1) .75 (19.1) .75 (19.1) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.34 (34.0) 1.46 (37.1) 1.65 (41.9) 1.84 (46.7) 2.02 (51.3) 2.34 (59.4) 2.72 (69.1) 2.96 (75.2) 3.22 (81.8) 3.86 (98.0) 4.38 (111.3) .654 (16.6) .688 (17.5) .705 (17.9) .732 (18.6) .773 (19.6) .823 (20.9) 1.041 (26.4) 1.062 (27.0) 1.092 (27.7) 1.190 (30.2) 1.250 (31.8) 1.730 (43.9) 1.750 (44.5) 1.780 (45.2) 1.800 (45.7) 2.020 (51.3) 2.090 (53.1) 2.360 (59.9) 2.410 (61.2) 2.450 (62.2) 2.550 (64.8) 2.610 (66.3) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.080 (27.4) 1.200 (30.5) 1.480 (37.6) 1.550 (39.4) 1.610 (40.9) 1.860 (47.2) 1.990 (50.5) 1.870 (47.5) 1.930 (49.0) 2.000 (50.8) 2.060 (52.3) 2.390 (60.7) 2.540 (64.5) 2.870 (72.9) 2.960 (75.2) 3.070 (78.0) 3.320 (84.3) 3.450 (87.6) Table II: Finish Table V: Conduit Type Symbol Material Finish A Aluminum Alloy, 6061 Cadmium, Olive Drab, per QQP-416 over Electroless Nickel per ASTM B733-90 and MIL-C-26074, B Brass, ASTM B16 1000 Hour Salt Spray Corrosion Resistant C Passivate per QQ-P-35 Steel 300 Series Electroless Nickel per ASTM M Aluminum Alloy, 6061 B733-90 and MIL-C-26074 NC Aluminum Alloy, 6061 Zinc Cobalt, Olive Drab Cadmium, Olive Drab, per QQ-P416, over Electroless Nickel per S Carbon Steel, B1113 ASTM B733-90 and MIL-C-26074, 500 Hour Salt Spray © 2012 Glenair, Inc. Conduit Type A B D H J Part Number 750-192 750-194 750-196 750-192 750-192 U.S. CAGE Code 06324 Configuration Brass conduit with single braided shield and jacket Brass conduit with double braided shield and jacket Brass conduit with triple braided shield and jacket Stainless steel conduit with single braided shield and jacket Nickel/iron conduit with single braided shield and jacket Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-41 E-Mail: [email protected] D