Series 75 Metal-Core Conduit 712-386 Straight, 45° & 90° Environmental User-Installable Fitting for Series 75 Flexible Metal-Core Conduit 712 F S 386 M 16 12-6 A Conduit Type Product Series Length in 1/2 Inch (12.7) Increments - Straight Version Only (Example: 6 = 3.0 inches (76.2)) Min. Length: Style 1 = 2.0 (50.8) Style 2 = 2.5 (63.5) Conn Designator A, F, H, or L (Pages F-3 to F-5) Angular Function: H = 45° J = 90° S = Straight Dash No. (Table II) Shell Size (Table I) Material/Finish (Table III) Basic No. LENGTH O-RING E LENGTH CONE LENGTH A THREAD (Page F-17) F CONDUIT DIA I.D. C DIA (Page F-17) STRAIGHT STYLE 2 STRAIGHT G/G1 .88 (22.4) MAX J/J1 45° H/H1 90° 45° K/K1 STYLE 2 (45° & 90°) © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-12 SHELLSIZE A,F,L H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 32 36 40 44 48 61 DASH NO. 08 12 16 20 24 32 40 48 56 64 80 96 TABLE I H MAX 1.700 (43.2) 1.730 (43.9) 1.750 (44.5) 1.780 (45.2) 1.800 (45.7) 1.810 (46.0) 2.020 (51.3) 2.060 (52.3) 2.090 (53.1) 2.320 (58.9) 2.360 (59.9) 2.410 (61.2) 2.450 (62.2) 2.500 (63.5) 2.550 (64.8) 2.270 (57.7) G MAX .639 (16.2) .654 (16.6) .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) 1.041 (26.4) 1.092 (27.7) 1.138 (28.9) 1.184 (30.1) 1.235 (31.4) 1.287 (32.7) 1.003 (25.5) CONDUIT I.D. .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) E .75 (19.1) .75 (19.1) .75 (19.1) .75 (19.1) .75 (19.1) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) J MAX .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) 1.720 (43.7) 1.830 (46.5) 1.950 (49.5) 2.080 (52.8) 1.390 (35.3) K MAX 1.810 (46.0) 1.870 (47.5) 1.930 (49.0) 2.000 (50.8) 2.060 (52.3) 2.080 (52.8) 2.390 (60.7) 2.470 (62.7) 2.540 (64.5) 2.780 (70.6) 2.870 (72.9) 2.960 (75.2) 3.070 (78.0) 3.200 (81.3) 3.320 (84.3) 2.380 (60.5) TABLE II F MAX G1 (NOTE 3) MAX 1.16 (29.5) .624 (15.8) 1.34 (34.0) .654 (16.6) 1.46 (37.1) .688 (17.5) 1.65 (41.9) .705 (17.9) 1.84 (46.7) .732 (18.6) 2.02 (51.3) .773 (19.6) 2.34 (59.4) .823 (20.9) 2.72 (69.1) 1.041 (26.4) 2.96 (75.2) 1.062 (27.0) 3.22 (81.8) 1.092 (27.7) 3.86 (98.0) 1.190 (30.2) 4.38 (111.3) 1.250 (31.8) Series 75 Metal-Core Conduit 712-386 Straight, 45° & 90° Environmental User-Installable Fitting for Series 75 Flexible Metal-Core Conduit NOTES: 1. Metric dimensions (mm), are in parentheses. 2. O-Ring not supplied with connector designator A. 3. F dimension is based on type A construction. Add .125 (3.2) to listed dimensions for additional shield types B through D. 4. When tubing I.D. max exceeds inside diameter of connector shell, style 2 will be supplied. Refer to pages F-15 and F-16. H1 MAX 1.700 (43.2) 1.730 (43.9) 1.750 (44.5) 1.780 (45.2) 1.800 (45.7) 2.020 (51.3) 2.090 (53.1) 2.360 (59.9) 2.410 (61.2) 2.450 (62.2) 2.550 (64.8) 2.610 (66.3) J1 MAX .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.080 (27.4) 1.200 (30.5) 1.480 (37.6) 1.550 (39.4) 1.610 (40.9) 1.860 (47.2) 1.990 (50.5) K1 MAX 1.810 (46.0) 1.870 (47.5) 1.930 (49.0) 2.000 (50.8) 2.060 (52.3) 2.390 (60.7) 2.540 (64.5) 2.870 (72.9) 2.960 (75.2) 3.070 (78.0) 3.320 (84.3) 3.450 (87.6) TABLE III SYMBOL MATERIAL FINISH Aluminum Alloy, 6061-T6 per QQ-A-225/8 Brass, ASTM B16 per QQ-B-626 Cadmium, Olive Drab, per QQ-P-416, over Electroless Nickel per ASTM B733-90, and MIL-C-26074, 500 Hour Salt Spray C Corrosion Resistant Steel per QQ-S-763, 300 Series Passivate per QQ-P-35 M Aluminum Alloy, 6061-T6 per QQ-A-225/8 Electroless Nickel per ASTM B733-90 and MIL-C-26074 NC Aluminum Alloy, 6061-T6 per QQ-A-225/8 Zinc Cobalt, Olive Drab Carbon Steel, B1113, per QQ-S-637 Cadmium, Olive Drab per QQ-P-416, over Electroless Nickel per ASTM B733-90 and MIL-C-26074, 500 Hour Salt Spray A B S © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-13