SIRU3003 .05–3 GHz Unamplified Fiber Optic Receiver DATASHEET | JULY 2014 MICROWAVE The SIRU3003 (Small Integrated Receiver Unit) is an ideal receiver to use with EMCORE’s high-performance externally-modulated fiber optic transmitters. This high-performance optical receiver is designed for applications from 50 MHz to 3 GHz and features high optical input power of up to +12 dBm (15 mW). The SIRU3000 is a fully-integrated unit that contains both high-frequency PIN photodiode and the control electronics. Only DC input voltages and the optical signal are required for operation. Microwave Antenna Signal Distribution The broad bandwidth of the unit makes it ideal to construct transparent links for microwave antenna signal distribution, Electronic Warfare (EW) systems and Ku- and Ka-Band systems. Other applications include delay lines, signal processing, radar system calibration, phased array antennas and other systems where it is necessary to transport RF and microwave signals over long distances without signal degradation. Broadband Delay-Line and Signal Processing Performance Highlights Applications Systems Parameter Min Max Units .05 - 3 GHz Wavelength - 1550 - nm Phased Array Antenna Systems, Interferometric Optical Input Power - - +12 dBm Temperature Range -40 - 70 °C Frequency Distribution Systems Antenna Arrays Features Frequency Range Typical Absolute Maximum Ratings Integrated High Frequency Photodiode and Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other Bias Circuitry in a Connectorized Package conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute 50 MHz - 3 GHz Bandwidth 1310 nm and 1550 nm Operation maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Min Max Units Operating Temperature (within specifications) TOP 0 50 °C High Optical Input Power Capability: Operating Temperature (with degraded performance) TOP -40 70 °C Storage Temperature TSTG -40 70 °C - NA +13 dBm +12 dBm (15 mW) Receiver Optical Input Power (damage level threshold) Optical Specifications Parameter Condition Min Typical Wavelength - 1280 - 1580 nm Optical Power Input - - - +12 (15mW) dBm Responsivity (@1310 nm) - 0.7 - - A/W - 0.7 - - A/W FC/APC - - - - Responsivity (@ 1550 nm) Connectors © 2014 EMCORE Corporation | REV 2014.07 +1 626-293-3400 Max [email protected] Unit www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. SIRU3003 .05–3 GHz Unamplified Fiber Optic Receiver DATASHEET | JULY 2014 MICROWAVE RF Specifications Parameter Condition Min Typ Frequency Range - 0.05 Electrical Power Requirements - - RF Response/Gain Variation (S21 w/EMCORE SITU3122 TX) 0.05 - 1 GHz 1 - 3 GHz Photodiode Monitor Output RF Connector Max Unit - 3 GHz - +15 V @ 50 mA - <5 <10 dB dB V/mA - - 0.1 - 2.92 mm - SMA (female) - - - - 50 0 Ω RF Output Impedence Note: Units provide signal transport above and below rated RF bandwidth with some degradation in signal gain and return loss. Package Outline Drawing Physical Specifications Parameter Configuration Dimensions D-Connector Pin Out DC Power Consumption Condition Min Typ Max Unit Pin Function Input Voltage Max Current Self Contained Housing - - - - 1 +15 V +15 0.7 A 0.8 H x 4.6 W x 3.4 D - - - in 2 n/c mm 3 n/c -40 - +70 °C 4 GND - oz 5 n/c g 6 Photodiode Monitor 7 n/c 8 n/c 9 n/c 20.32 H x 116.84 W x 86.36 D Operating/Storage Temperature Weight - - 10 - - 283.5 Ordering Information Product Name SIRU3003-00 Description 0.05 - 3 GHz Fiber Optic Receiver Module © 2014 EMCORE Corporation | REV 2014.07 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.