CCPD-912 Model 9×14 mm SMD, 3.3V, LVPECL Frequency Range: Frequency Stability: Temperature Range: (Option M) (Option X) Storage: Input Voltage: Input Current: Output: Symmetry: Rise/Fall Time: Logic: Terminated to Vdd-2V Temp. 0°C to 85°C Temp. -40°C to 0°C Disable Time Start-up Time 12kHz to 20MHz Jitter: Phase Noise: 10Hz 100Hz 1kHz 10kHz 100kHz~100MHz Aging: 77.760 MHz to 161.1328 MHz ±20ppm to ±100ppm 0°C to 70°C -20°C to 70°C -40°C to 85°C -45°C to 90°C 3.3V ± 0.3V 55mA Typical, 88mA Max Differential LVPECL 45/55% Max @ zero crossing point 1ns Max (20% to 80%) into 50 ohms "0" = 1.490 Min, 1.680 Max "1" = 2.275 Min, 2.420 Max "0" = 1.470 Min, 1.745 Max "1" = 2.215 Min, 2.420 Max 200ns Max 1mSec Typical, 2mSec Max 0.45 pSec Typical @ 80 MHz, 1ps RMS Max 0.25 pSec Typical @ 160 MHz, 1ps RMS Max -65 dBc Typical -98 dBc Typical -125 dBc Typical -140 dBc Typical -145 dBc Typical <3ppm 1st year, <1ppm every year thereafter Designed to meet today's requirements for 3.3V Differential LVPECL applications. The CCPD-912 is a very low noise, low jitter clock oscillator for demanding telecom and other applications. SUGGESTED PAD LAYOUT 0.100 (2.54) 0.560 (14.2) 0.360 (9.14) 0.560 (14.2) CRYSTEK P/N Frequency Date Code 0.210 (5.3) 0.040 (1.01) 1 2 6 5 via to ground 0.01µF 0.050 (1.27) 3 0.070 (1.77) 4 0.280 (7.11) 0.090 (2.28) 0.200 (5.08) 0.200 (5.08) RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE Ramp-Up 3°C/Sec Max. Critical Temperature Zone Ramp-Down 6°C/Sec. 260°C 217°C Crystek Part Number Guide 200°C CCPD-912 X - 25 - 155.520 150°C #1 Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260°C for 10 Secs. Max. #2 #3 #4 #5 Stability Indicator #1 Crystek SMD PECL Osc. #2 Model 912 = 9×14mm smd 6pad 3.3V #3 Temp. Range: Blank = 0/70°C, M= -20/70°C, X= -40/85°C #4 Stability: (see Table 1) #5 Frequency in MHz: 3 or 6 decimal places Blank (std) ± 100ppm 50 ± 50ppm 25 ± 25ppm 20 ** ± 20ppm ** only available 0/70°C NOTE: Reflow Profile with 240°C peak also acceptable. PIN Function 1 2 3 4 5 6 E/D NC GND OUT COUT Vdd Example: CCPD-912X-25-155.520 = 3.3V, 45/55, -40/85°C, 25ppm, 155.520 MHz Tri-State Function Function pin 1 Output pin Open "1" level 0.7V Min "0" level 0.3V Max Active Active High Z CRYSTEK CORPORATION Specifications subject to change without notice. Table 1 TD-030403 Rev. G 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com