Encoders - Non-Turn Washers

Optical Encoders
Shock Resistance: Test 1: 100g for 6 mS, halfsine wave with velocity change of 12.3 ft/s. Test
2: 100g for 6 mS, sawtooth wave with velocity
change of 9.7 ft/s.
Materials and Finishes
Bushing: Aluminum
Code Housing: Hiloy 610B
Shaft: Stainless steel
Retaining Ring: Stainless steel
Code Rotor and Aperture: Chemically etched
stainless steel/electroformed nickel
Printed Circuit Board: NEMA Grade FR-4.
Five microinches minimum gold over 100
microinches minimum nickel over copper
Optical Barrier: Polyphenylene sulfide, 94 V-0
Backplate: Polyester
Header: Phosphor bronze, 200 microinches tin
over 50 microinches nickel (pin version only)
Infrared Emitter: Gallium aluminum arsenide
Photo IC: Planar silicon
Cable: 26 AWG, stranded/tinned wire, PVC
coated on .100 (2,54) centers (cable version
only)
ORDERING INFORMATION
Series
Style: K = Standard, 4-pin, high resolution
KS = Sealed, 4-pin, high resolution
R = Standard, 5-pin, high resolution
RS = Sealed, 5-pin, high resolution
Cycles: per channel per revolution = 25, 32, 50, 64, 100, 128, 256
61RS256 – 060
Optical and Mechanical
Encoders
Cable Termination: 060 = 6.0in. Cable is terminated with Molex Connector P/N
14-56-3056.
Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Dstributor or Grayhill.
ACCESSORIES
Non-Turn Washer
Shaft and Panel Seal
The Series 61 bushing is 3/8 inches in diameter
and has a non-turn keyway to prevent rotation
of the switch body when the panel is cut to fit.
Another way to keep the switch from turning is
to use a non-turn washer. The washer is
brass, tin/zinc plated.
Part number: 12C1087-1
Part number: SHH694-11, 302-2B stainless
steel, no plating
For shaft and panel seal version, the shaft is
sealed by an o-ring inside the bushing. The
panel is sealed by a flat gasket .045" thick at the
base of the bushing. The panel seals will increase
the behind panel dimension by .020" to .040",
when the switch is mounted. The panel seal is
silicon rubber.
DIMENSIONS
In inches (and millimeters)
.625 ± .010 DIA.
(15,89 ± 0,25)
.625 ± .010
(15,88 ± 0,25) DIA.
.032 ± .002
(0,81 ± 0,05)
90˚ ± 1˚
.437 + .010 –.000
(11,10 + 0,25 –0,00)
.125 ± .010
(3,16 ± 0,25)
.120 ± .003
(3,05 ± 0,08)
Encoder
46
90˚ ± 1˚
.005 ± .003
(0,38 ± 0,08)
RADIUS
CL
.032
± .002
(0,81
± 0,05)
.530 ± .005
(13,46 ± 0,13)
.030 (0,76)
RADIUS MAX.
.120 ± .003
(3,05 ± 0,08)
.110
± .003
(2,79
± 0,08)
Part Number: 12C1087-1
Part Number: SHH694-11
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com