Keylock Rotary Switches Series 58 Single Deck, Antistatic Lock features •Minimum Space Behind Panel •15,000 Vdc Static Protection •5 Tumbler-Plate Security •In-Panel Key Recoding Dimensions Switch Features •Economical •Solder Lug or PC Mount •36°, 45°, 60°, or 90° Throws •1 or 2 Poles Per Switch •Up to 10 Positions for 1 Pole •200 mA for 25,000 Cycles in inches (and millimeters) Standard Style Ø .900 (Ø 22,86) MOUNTING NUT .875 (22,23) ACROSS FLATS .125 (3,18) THICK SHOWN IN THIS VIEW ONLY A TERMINAL FOR POSITION 1 COMMON TERMINAL 4 3 2 1 POSITION INDICATOR ARROW 36°, 45°, 60°, or 90° Angle of Throw LOCKWASHER Ø 1.062 ± .020 (Ø 26,97 ± 0,51) SHOWN IN THIS VIEW ONLY .268 ± .015 (6,81 ± 0,38) .792 ± .020 (20,12 ± 0,51) .625 ± .010 (15,88 ± 0,25) .187 ± .015 (4,75 ± 0,38) Allterminalsareprovided regardlessofthenumberof activeswitchpositions. 1.957 ± .062 (49,71 ± 1,57) PC Mount Style 36°, 45°, 60, or 90° Angle of Throw 2 1 Dimensions not shown are thesameasabove. 4 3 Rotary Switches .260 ± .020 Keyslot is shown in (6,60 ± 0,51) switch position 1. KeyremovalpositionA. Key is inserted cut edge down. .125 ± .015 (3,18 ± 0,38) 1.875 ± .062 (47,63 ± 1,57) Grayhill part number and date code marked on label. Customer part number marked on request. terminal DETAIL RECOMMENDED PANEL CUT Solder Lug A Solder Lug Common E G B PC Mount H A = .064 ± .005 (1,63±0,13) B = .032 ± .004 (0,81±0,10) C D C = .050 ± .010 (1,27±0,25) D = .062 Ø ± .002 (1,57 Ø ±0,05) G =.020 ± .003 (0,51 ±0,08) H = .062 ± .004 (1,57 ±0,10) Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois G F E = .125 ± .015 (3,18 ±0,38) F = .020 ± .003 (0,51 ±0,08) .629 + .010 –.000 (15,98 + 0,25) H .750 + .015 –.000 (19,05 + 0,38) 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Keylock Rotary Switches circuitry 36° Angle of Throw 45° Angle of Throw REAR VIEW REAR VIEW COMMON TERMINAL (1 POLE) .320 ± .015 (8,13 ± 0,38) DIAMETER CIRCLE OF TERMINAL CENTERS COMMON TERMINAL (1 POLE) .320 ± .015 (8,13 ± 0,38) DIAMETER CIRCLE OF TERMINAL CENTERS .125 ± .015 (3,18 ± 0,38) 18˚ POS. 1 LOCATION OF COMMONS 2 POLES 36˚ 8 VIEWED FROM FRONT END; SHOWN IN POSITION 1. 1 8 1 8 6 6 4 TWO POLE ONE POLE 90° Angle of Throw REAR VIEW 60° Angle of Throw COMMON TERMINAL (1 POLE) COMMON TERMINAL (1 POLE) .320 ± .015 (8,13 ± 0,38) DIAMETER CIRCLE OF TERMINAL CENTERS .125 ± .015 (3,18 ± 0,38) 30˚ 5 4 5 5 TWO POLE 3 6 3 6 4 5 REAR VIEW 3 C1 ONE POLE C1 C2 7 4 2 7 2 7 C2 3 7 LOCATION OF COMMONS 2 POLES 45˚ VIEWED FROM FRONT END; SHOWN IN POSITION 1. 10 1 10 1 9 9 2 2 8 .125 ± .015 (3,18 ± 0,38) 22.5˚ POS. 1 LOCATION OF COMMONS 2 POLES .320 ± .015 (8,13 ± 0,38) DIAMETER CIRCLE OF TERMINAL CENTERS .125 ± .015 (3,18 ± 0,38) 45˚ POS. 1 LOCATION OF COMMONS 2 POLES 90˚ VIEWED FROM FRONT END; SHOWN IN POSITION 1. 6 6 1 1 2 5 4 POS. 1 Rotary Switches 60˚ 5 C2 3 ONE POLE C1 2 3 TWO POLE 3 ONE POLE 1 C1 2 TWO POLE switch Specifications Materials & Finishes Keys: Brass; 2 supplied Lock Barrel & Plug: Zinc, clear chromate Lockwasher: Steel, tin zinc plated Mounting Nut: Steel, nickel-plated Tumbler Plates: Brass Electrical Characteristics Chart is shown for non-shorting contacts and resistive load and for the life limiting criteria indicated below. The data for the curve was measured at sea level, 25°C and 68% relative humidity. Contact Grayhill for more information if any of the following is true: life limiting criteria are more critical than those listed; more cycles of operation are required; a larger make and break current is required; the operating environment includes elevated temperatures or reduced pressures. 300 CURRENT MILLIAMPS Mounting: By bushing, nut and lockwasher Keying: All locks keyed alike except by special order Orientation of Keylock Switch: Lock flats on both sides with key upright (cut side down) in position 1. Key Removals: 36° Throw Switch At every position or At 0° & 180° 45° Throw Switch At every position or At 0°, 90°, 180°, 270° 60° Throw Switch At every position or At 0°, 180° 90° Throw Switch At every position or At 0°, 180° Optional pulls Contact Grayhill 4 C2 Lock Specifications General Characteristics 1 4 2 3 4 VIEWED FROM FRONT END; SHOWN IN POSITION 1. A 200 B Curve A: 220 Vac all angles of throw. Curve B: 115 Vac and 30 Vdc for all angles of throw. 100 0 0 Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 10 20 CYCLESx1000 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com 30 Keylock Rotary Switches switch Specifications Continued Contact Resistance: Initially: less than 10 mΩ End of life: less than 50 mΩ Insulation Resistance: (Between mutually insulated parts) Initially: 50,000 MΩ Minimum: 10,000 MΩ Breakdown Voltage: (Between mutually insulated parts) more than 600 Vac Life Expectancy: Per chart; cycle is 1 rotation thru all active positions plus a full return. Carry Current: 6A; maximum temperature rise 20°C Anti-Static Voltage: Anti-static types tested to withstand 15,000 Vdc Mechanical Characteristics Switching Mode: Shorting (make before break) or non-shorting (break before make) as limited by the Choices chart Type of Contact: Wiping Number of Terminals: All switches are provided with the full circle of terminals regardless of the number of active positions Stop Strength: 1.70 Nm maximum (15.0 inlbs) Switching Torque: 8 to 16 in-ozs Materials and Finishes Switch Base: Thermoset plastic Switch Housing: Nylon Detent Rotor: Nylon Detent Balls: Steel, nickel-plated Detent Springs, and Contact Springs: Stainless steel Common Ring: Brass, gold plate over silver plate Terminals: Brass, gold over silver and nickel plate Rotor Contact: Precious metal, gold alloy Choices and limitations Lock Style and Description* Switch Style and Angle of No. Of Poles/ DescriptionThrow Decks Deck Positions Per Pole** Shorting or Non-Shrtg. Series 58J Switches J4:Standard–Key pulls at Position 1 and at 90 Degree Increments J8:Standard–Key Pulls at Each Position A = Standard, Solder Lugs P = Standard, PC Mount A = Standard, Solder Lugs P = Standard, PC Mount Rotary Switches J9:Standard–Key Pulls at Position 1 and at 180 Degrees A = Standard, Solder Lugs P = Standard, PC Mount 45° 1 1 2 02 to 08 02 to 04 N or S N or S 36° 1 1 2 02 to 10 02 to 05 N or S N or S 45° 1 1 2 02 to 08 02 to 04 N or S N or S 90° 1 1 2 02 to 04 02 N N 36° 1 1 2 02 to 10 02 to 05 N or S N or S 45° 1 1 2 02 to 08 02 to 04 N or S N or S 60° 1 1 2 02 to 06 02 to 03 N N 90° 1 1 02 to 04 N 2 02 N *Standard Keylock has anti-static protection. All keylock versions available without anti-static protection, with a reduced overall body length. Contact Grayhill for more information. **For single pole switches with maximum positions, specify continuous rotation or fixed stop when ordering. Ordering Information Series Lock Style: per Choices Chart J4, J8, J9 Switch Style: per Choices Chart A or P Angle of Throw: 36, 45, 60 or 90 (per Choices chart) Number of Decks: 01 Poles per Deck: = 1 or 2 (per Choices chart) Positions per Pole: 02 thru 10 (per Choices chart) Type of Contacts: (per Choices chart) N = Non-shorting S = Shorting Stop Arrangement Suffix: (needed only for 1-pole switches with maximum positions) F = Fixed stop between last and first positions *Leave blank for continuous rotation Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. 58J8A36-01-1-10N-F Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com