CK-COMPONENTS HBS2SP011C

HB Series
Single Pole Standard Precision Snap-acting Switches
Features/Benefits
• Low differential travel, high repeatability
• Long life—150,000 cycles typical
• Single and double pole circuitry
• Sealed actuator and case
Typical Applications
• Thermostats
• Motors
• Industrial controls
Models Available
Materials
CONTACT RATING: From low level* to 20 AMPS @ 480 V AC;
see ELECTRICAL RATING option section for complete listings.
ELECTRICAL LIFE: 150,000 cycles at 20 AMPS @ 250 V AC.
consult Customer Service Center for typical life at other ratings.
INSULATION RESISTANCE: 1,000 M ohm min.
DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –67ºF to 302ºF (–55ºC to 150ºC).
OPERATING FORCE: From 4 oz. to 26 oz. max. at actuator
button available.
MOUNTING SCREWS: Torque 3 in/lbs max.
(Note: Exceeding 3 in/lbs torque may change operating
characteristics and increase the possibility of cracking
switch case).
TERMINAL SCREWS: Torque 4 in/lbs max.
PANEL MOUNTING BUSHING: Torque 4-6 in/lbs max.
DEGREE OF PROTECTION: IP65; Dust-proof, water splash and
dew condensation.
SWITCH HOUSING: Heat resistant/electrical grade phenolic.
INSERTS: Brass alloy.
ACTUATOR BUTTON: Moisture resistant phenolic.
SPRING: Copper alloy.
PIVOT: Brass alloy.
MOVABLE CONTACTS: Gold alloy for ratings 1 AMP or less.
Fine silver for ratings greater than 1 AMP and motor load
ratings less than 1/2 HP @ 125 V AC. Silver alloy for motor
load ratings 1/2 HP @ 125 V AC or greater.
STATIONARY CONTACTS: Gold alloy for ratings 1 AMP or less.
Fine silver welded to copper base for ratings greater than
1 AMP and motor load ratings less than 1/2 HP @ 125 V AC.
Silver alloy on copper base for motor load ratings 1/2 HP @
125 V AC or greater.
TERMINALS: Brass alloy, bright tin plated.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
* Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @
20 V AC or DC max.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J-50 thru J-54. For additional options not shown in catalog, consult Customer Service Center.
H B
Series
HB Precision Snap-acting Switches
Function
S SP
S
Operating Force
KG 18 oz./510 grams
GF 4 oz./113 grams
KA 9 oz./255 grams
KC 13 oz./368 grams
KH 20 oz./567 grams
PB 26 oz./737 grams
Contact Separation
2 .020"
1 .010"
4 .040"
7 .070"
Electrical Rating
B4 20 A, 125, 250, 480 V AC;
0.25 A, 250 V DC; 0.5 A, 125 V DC
A2 5 A, 125, 250 V AC
B6 20 A, 125, 250, 480 V AC; 0.25 A,
250 V DC; 0.5 A, 125 V DC; 3/4 HP,
125 V AC; 1 1/2 HP, 25O V AC
F5 1 A,125 V AC; 1 A, 3O V DC
F9 22 A, 125, 277 V AC; 15 A, 480 V AC;
1/4 HP, 125 V AC; 1/2 HP, 250 V AC
X3 20 A, 125, 250, 480 V AC; 0.25 A,
250 V DC; 0.5 A, 125 V DC; 15(10) A,
380 V~ 185 +++ µ (VDE)
S
C
Mounting Style
S Standard
Circuitry
C SPDT
Actuator
P0 Pin plunger
A0 Lever roller
D0 Stub plunger
F0 Reverse acting lever roller
J0 High overtravel plunger
R5 Perpendicular roller plunger
T0 Lever
TS Sealed Lever
Y0 Reverse acting lever
Terminations
11 Flat base, solder, 4-40 screws
41 Flat base, .250" quick connect
55 Step base, cup washers, 6-32 screws
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
J–49
www.ck-components.com
J
Snap-acting
Specifications
HB Series
Single Pole Standard Precision Snap-acting Switches
Sealed Actuator and Case
To provide reliable service under environmental conditions that might damage standard precision switches, various HB Series
switch models are sealed against the entrance of airborne contaminants and/or splashing liquids. The clearance between
the operating plunger and the cover is sealed with a silicone boot and the base cover joint is sealed with an epoxy adhesive.
These models are designed to meet requirements of IP65 (dust proof, water splash and dew condensation). For additional
information on sealed switches, consult our Customer Service Center.
SERIES
HB
PRECISION SNAP-ACTING SWITCHES
FUNCTION
S
SINGLE POLE SWITCH
OPER. POS.
.625 ± .015
(15,88 ± 0,38)
Snap-acting
J
Single Pole
NOTE: To select switching function, see CIRCUITRY section, page J-52.
CONTACT SEPARATION
OPTION
CODE
NOMINAL CONTACT
SEPARATION (in./mm)
2
.020
(0,51)
1
.010
(0,25)
4
.040
(1,02)
7
.070
(1,78)
.0004
.0002
CONTACT
SEPARATION 0
Switches with 1 AMP rating (option
code ‘F5’) are available only with
.020 contact separation (option ‘2’).
DIFFERENTIAL TRAVEL SPECIFICATION LIMITS
FOR VARIOUS CONTACT SEPARATIONS
INCH
.001
.002
.003
.004
.005
1
Switches with 1/2 HP, 125 V AC rating
or greater (option codes ‘B5 and B6’)
are not available with .010 contact
separation (option code ‘1’).
2
4
7
.0015
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–50
www.ck-components.com
HB Series
Single Pole Standard Precision Snap-acting Switches
OPERATING FORCE
OPTION
CODE
OPERATING FORCE SPECIFICATION LIMITS
FOR VARIOUS CONTACT SEPARATIONS
MAXIMUM OPERATING
FORCE (OZ./GRAMS)
STANDARD CONTACT
SEPARATION (inch)
KG
18
510
.020
CONTACT
SEPARATION
GF
4
115
.010
.010
KA
9
255
.010
KC
13
370
.020
KH
20
570
.040
PB
26
740
.070
OUNCES
9
7
4
13 14
18 20
26
30
.020
.040
.070
STANDARD RANGE
MAXIMUM LIMITS AVAILABLE
NOTE: All listed differential travel characteristics are based on standard operating force
andcontact separation. For any other force or contact separation, consult Customer
Service Center.
Operating force varies with actuator option, see ACTUATOR option section.
ELECTRICAL RATING
OPTION CODE
MOVABLE CONTACT
B4
STATIONARY CONTACT
ELECTRICAL RATING
20 AMPS @ 125, 250 & 480 V AC; 0.25 AMPS @ 250 V DC; 0.5 AMPS @
125 V DC (UL/CSA).
Fine silver welded to
copper base.
Fine silver.
5 AMPS @ 125 & 250 V AC (UL/CSA).
B6
Precious metal alloy.
Precious metal alloy.
20 AMPS @ 125, 250 & 480 V AC; 0.25 AMP @ 250 V DC; 0.5 AMP @
125 V DC; 3/4 HP @ 125 V AC; 1 1/2 HP @ 250 V AC (UL/CSA).
F5
Gold alloy.
Gold alloy.
Low level* to 1 AMP @ 125 V AC; 1 AMP @ 30 V DC (UL/CSA).
F9
Fine silver.
Fine silver welded to
copper base.
22 AMPS @ 125 & 277 V AC; 15 AMPS @ 480 V AC; 1/4 HP @ 125 V AC;
1/2 HP @ 250 V AC; 277 V AC (UL/CSA).
V3
Fine silver.
Fine silver welded to
copper base.
20 AMPS @ 125, 250, 480 V AC; 0.25 AMP @ 250 V DC, 0.5 AMP @
125 V DC (UL/CSA); 15 (10) AMPS @ 380 V~ T85 50E3 µ (VDE).
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
AVAILABLE COMBINATIONS
OPERATING FORCE (oz.)
EUROPEAN SYMBOLS
ELECTRICAL
RATING
4
GF
9
KA
13
KC
18
KG
20
KH
26
PB
Alternating current.
A2
•
•
•
•
•
•
T_ _
Maximum rated use temperature.
B4
x
•
•
•
•
•
Cycles over 50,000 at rated current.
B6
x
x
x
•
•
•
50E3
First number represents resistive
rating; second number represents
inductive (motor) rating.
F5
x
x
•
•
•
•
10(3)
F9
x
x
x
•
•
•
X3
x
•
•
•
•
•
µ
Microgap construction
(less than 4 mm).
~
All models
with all options,
• AVAILABLE
x NOT AVAILABLE
also available.
Consult Customer Service center for availability and delivery of nonstandard ratings.
* Low Level=conditions where no arcing occurs during switching,
i.e., 0.4 VA max. @ 20 V AC or DC max.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
J–51
www.ck-components.com
Snap-acting
A2
J
HB Series
Single Pole Standard Precision Snap-acting Switches
MOUNTING STYLE
S
Standard
NOTE: Mounting holes will accept pins or screws of .139 dia. (3,53) max. on
1.000 ± .002 (25,4 ± 0,05) centers.
NOTE: Torque mounting screws 3 inlbs max.
ACTUATOR
NO.
POLES
FIG.
DIM. A
A0
SP
1
.86
(21,8)
D0
SP
3
F0
SP
J
J0
Snap-acting
A
OPTION CODE
DIM. B
DIM. C
DIM. D
1.120 ± .060
(28,45 ± 1,52)
.38 dia.
(9,7Ø)
1.03
(26,2)
.92
(23,4)
.844 ± .020
(21,44 ± 0,51)
—
—
2
.09
(2,3)
1.120 ± .050
(28,45 ± 1,27)
.38 dia.
(9,7Ø)
.74
(18,8)
SP
4
.86
(21,8)
.860±.030
(21,84±0,76)
.64 dia.
(16,3Ø)
0.33
(8,40)
P0
SP
5
.92
(23,4)
.625 ± .010
(15,88 ± 0,25)
—
—
R5
SP
6
.92
(23,4)
.62
(15,7)
.50 dia.
(12,7Ø)
0.61
(15,5)
T0
SP
7
1.310
(33,27)
.720 ± .060
(18,28 ± 1,52)
1.03 dia.
(26,2Ø))
—
TS*
SP
7
1.47
(37,3)
.720 ± .060
(18,28 ± 1,52)
1.03 dia.
(26,2Ø)
—
Y0
SP
8
.05
(1,3)
.720 ± .030
(18,29 ± 0,76)
.74 dia.
(18,8Ø)
2.65
(6,73)
D
A
D
C
B
B
FIG.
C
1
FIG. 2
Lever Roller
Lever Roller
A
B
FIG. 3
Stub Plunger
* Actuators sealed against the entrance of airborne
contaminants and/or splashing liquids.
C
D
A
A
B? .040
A
B
D
FIG. 5
Pin Plunger
PANEL MOUNTING
C
B
FIG. 4
Plunger
FIG. 6
Perpendicular Roller Plunger
.50 DIA.
(12,70?)
D
C
A
C
B
A
B
FIG. 8
Reverse Acting Lever
FIG. 7
Lever
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–52
www.ck-components.com
HB Series
Single Pole Standard Precision Snap-acting Switches
ACTUATOR
ACTUATOR
OPTION
CODE
MAXIMUM
OPERATING
FORCE
(OZ./GRAMS)
MAXIMUM
RELEASE
FORCE
(OZ./GRAMS)
A0
D0
F0
* SEALED ACTUATOR
J0
P0
R5
T0
Y0
TS
GF
—
—
—
—
4
115
—
—
—
—
KA
3
85
9.5
269
10
284
10
284
9
255
10
284
2
60
10
284
2
56
KC
—
13
370
10
284
13
370
13
370
13
370
—
10
284
—
KG
3.5
100
—
—
—
18
510
—
2.5
71
—
2.5
71
KH
4
115
20
570
20
570
20
570
20
570
20
570
3
85
20
570
3
85
PB
4.5
130
26
740
20
570
26
740
26
740
26
740
3.5
100
20
570
3.5
100
GF
—
—
—
—
1
28
—
—
—
—
KA
.75
21
4
110
3
85
4
110
4
110
4
110
.5
14
3
85
.5
14
KC
—
4
110
3
85
4
110
4
110
4
110
—
3
85
—
KG
.75
21
—
—
—
4
110
—
.5
14
—
.5
14
KH
.75
21
4
110
3
85
4
110
4
110
4
110
.5
14
3
85
.5
14
PB
.75
21
4
110
3
85
4
110
4
110
4
110
.5
14
3
85
.5
14
J
NOTE: For basic switch operating forces, see page J-51. * Actuators sealed against the entrance of airbornecontaminants and/or splashing liquids.
MAXIMUM
DIFFERENTIAL
TRAVEL
(IN/MM)
MAXIMUM
PRETRAVEL
(IN/MM)
MINIMUM
OVERTRAVEL
(IN/MM)
* SEALED ACTUATOR
A0
D0
F0
J0
P0
R5
GF
—
—
—
—
.0005
(0,013)
—
—
—
—
KA
.020
(0,51)
.0005
(0,013)
.005
(0,13)
—
.0005
(0,013)
—
.047
(1,19)
.005
(0,13)
.047
(1,19)
KC
—
.002
(0,05)
.008
(0,20)
—
.002
(0,05)
—
—
.009
(0,23)
—
KG
.062
(1,57)
—
—
—
.003
(0,08)
—
.078
(1,98)
—
.078
(1,98)
KH
.080
(2,03)
.003
(0,76)
.020
(0,51)
—
.003
(0,08)
—
.093
(2,36)
.020
(0,51)
.093
(2,36)
PB
.125
(3,18)
.007
(0,18)
.030
(0,76)
—
.005
(0,13)
—
.156
(3,96)
.031
(0,79)
.156
(3,96)
GF
—
—
—
—
.020
(0,51)
—
—
—
—
KA
.312
(7,92)
.020
(0,51)
0.8
(2,0)
.015
(0,38)
.015
(0,38)
.015
(0,38)
.38
(9,7)
.09
(2,3)
.38
(9,7)
KC
—
.020
(0,51)
0.8
(2,0)
.020
(0,51)
.020
(0,51)
.020
(0,51)
—
.09
(2,3)
—
KG
.312
(7,92)
—
—
—
.025
(0,64)
—
.38
(9,7)
—
.38
(9,7)
KH
.38
(9,7)
.025
(0,64)
0.9
(2,3)
.025
(0,64)
.025
(0,64)
.025
(0,64)
.38
(9,7)
0.9
(2,3)
.38
(9,7)
PB
.38
(9,7)
.030
(0,76)
0.9
(2,3)
.030
(0,76)
.030
(0,76)
.030
(0,76)
.38
(9,7)
0.9
(2,3)
.38
(9,7)
GF
—
—
—
—
.005
(0,13)
—
—
—
—
KA
.156
(3,96)
.055
(1,40)
.06
(1,5)
.22
(5,6)
.005
(0,13)
.141
(3,58)
.19
(4,8)
.06
(1,5)
.19
(4,8)
KC
—
.055
(1,40)
0.9
(2,3)
.22
(5,6)
.005
(0,13)
.141
(3,58)
—
0.9
(2,3)
—
KG
.156
(3,96)
—
—
—
.005
(0,13)
—
.19
(4,8)
—
.19
(4,8)
KH
.156
(3,96)
.055
(1,40)
0.9
(2,3)
.22
(5,6)
.005
(0,13)
.141
(3,58)
.19
(4,8)
0.9
(2,3)
.19
(4,8)
PB
.156
(3,96)
.055
(1,40)
0.9
(2,3)
.22
(5,6)
.005
(0,13)
.141
(3,58)
.19
(4,8)
0.9
(2,3)
.19
(4,8)
T0
Y0
TS
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
J–53
www.ck-components.com
Snap-acting
ACTUATOR
OPTION
CODE
HB Series
Single Pole Standard Precision Snap-acting Switches
TERMINATIONS
11
41
FLAT BASE, SOLDER TERMINALS AND 4-40 SCREWS
FLAT BASE, .250" QUICK CONNECT TERMINALS
NOTE: Switches with flat base option have molded ribs that provide increased
creep distance.
55
STEP BASE, 6-32 SCREWS AND CUP WASHERS
Snap-acting
J
NOTE: Switches with step base option provide wide
electrical clearance for screw terminal options.
CIRCUITRY
C
DT (Double Throw, Normally Closed & Normally Open)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–54
www.ck-components.com