VDRS Series www.vishay.com Vishay BCcomponents VDR Metal Oxide Varistors Standard FEATURES • Low high purity zinc oxide disc • Halogen free insulating epoxy coating • Zinc oxide disc, HF epoxy coated • Straight leads and kinked leads • Straight leads with flange (VDRS05 and VDRS07 only) • Certified according to UL 1449 edition 3, VDE/IEC 61051-1/2 and CSA • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA PARAMETER VALUE UNIT RMS 14 to 680 V DC 18 to 895 V 100 to 6500 A 0.5 to 496 J Maximum continuous voltage in operating temperature range: Maximum non-repetitive transient current INRP (8 x 20 μs) Maximum energy (10/1000 μs) APPLICATION • Overvoltage and transient voltage protection DESCRIPTION Detailed specification Based on IEC 61051-1 IEC 61051-2 IEC 61051-2-2 Storage temperature -40 to +125 °C Operating temperature -40 to +85 °C The varistors consist of a disc of low- ZnO ceramic material with two solid copper leads (S20 types only) or copper clad steel wire. The wires have a matte tin plating. They are coated with a layer of ocher colored halogen-free epoxy, which provides electrical, mechanical and climatic protection. The encapsulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45. MOUNTING The varistors are suitable for processing on automatic insertion and cutting and bending equipment. The varistors are available in a number of packaging options: Varistors with flanged leads provide better positioning on printed-circuit boards (PCB) and more accurate control over component height. This is important for hand mounting and automatic insertion techniques; see outlines of flanged leads drawing. • Bulk Typical soldering • On tape and reel 235 °C, duration: 5 s (Pb-bearing) • On tape in ammopack 245 °C, duration: 5 s (lead (Pb)-free) The basic ordering code for each option is given in tables titled Varistors on Tape on Reel, Varistors on Tape in Ammopack and Varistors in Bulk. To complete the catalog number and to determine the required operating parameters, see Electrical Data and Ordering Information table. Resistance to soldering heat ORDERING INFORMATION Note • Special lead-configuration as inside or outside crimped leads on request. 260 °C, duration: 10 s max. MARKING The varistors are marked with the following information: • Maximum continuous RMS voltage • Series number (592, 593, 594, 595 or 596) • Safety marks on VDRS10-14-20 types • Manufacturers logo • Date of manufacture (YYWW) INFLAMMABILITY The varistors are passive non-flammable. The encapsulation is made of flammable resistant epoxy in accordance with UL 94 V-0. Revision: 19-Jun-15 Document Number: 29081 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM VOLTAGE (3) CONTINUOUS at 1 mA VOLTAGE RMS (2) (V) DC (V) (V) 14 18 22 17 22 27 20 26 33 25 31 39 30 38 47 35 45 56 40 56 68 50 65 82 60 85 100 75 100 120 95 125 150 Revision: 19-Jun-15 MAXIMUM VOLTAGE at STATED CURRENT V (V) 48 43 43 43 43 60 53 53 53 53 73 65 65 65 65 86 77 77 77 77 96 93 93 93 93 123 110 110 110 110 145 135 135 135 135 145 140 140 140 170 165 165 165 165 210 200 200 200 200 250 250 250 250 250 I (A) 1.0 2.5 5.0 10.0 20.0 1.0 2.5 5.0 10.0 20.0 1.0 2.5 5.0 10.0 20.0 1.0 2.5 5.0 10.0 20.0 1.0 2.5 5.0 10.0 20.0 1.0 2.5 5.0 10.0 20.0 1.0 2.5 5.0 10.0 20.0 5.0 10.0 25.0 50.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 MAXIMUM NON-REP. TYPICAL MAXIMUM T TRANSIENT CAP. ENERGY (4) (max.) CURRENT (5) at 1 kHz (10 x 1 000 μs) INRP (8 x 20 μs) E (J) (A) (pF) (mm) (mm) 0.5 1.7 4.3 5.4 8.0 0.7 2.0 5.3 6.9 10.0 0.8 2.5 6.5 8.8 12.0 0.9 3.0 7.7 9.4 14.0 1.1 3.6 9.2 12.0 17.0 1.4 4.4 11.0 14.0 20.0 1.6 5.2 13.0 17.0 24.0 2.6 7.0 12.0 21.0 2.9 8.3 15.0 24.0 56.0 3.4 10.0 18.0 29.0 64.0 4.1 13.0 22.0 37.0 88.0 100 250 500 1000 2000 100 250 500 1000 2000 100 250 500 1000 2000 100 250 500 1000 2000 100 250 500 1000 2000 100 250 500 1000 2000 100 250 500 1000 2000 400 1200 2500 4500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 1300 2800 6000 15 000 30 000 1050 2000 4000 10 000 20 000 900 1500 3000 7500 15 000 500 1350 2600 6500 13 000 700 1600 2700 6000 12 000 560 1300 2200 4800 9600 460 1000 1800 3800 7600 370 900 1500 3100 290 700 1200 2300 4700 240 530 1000 1900 3900 180 450 800 1500 3000 4.1 4.1 4.4 4.4 4.6 4.1 4.1 4.4 4.4 4.6 4.1 4.1 4.4 4.4 4.8 4.2 4.2 4.6 4.6 5.0 4.4 4.4 4.8 4.8 5.2 4.8 4.8 5.2 5.2 5.6 5.1 5.1 5.5 5.5 5.9 4.1 4.1 4.4 4.4 4.1 4.1 4.4 4.4 4.5 4.1 4.1 4.4 4.4 4.8 4.2 4.2 4.6 4.6 5.2 0.7 ± 0.3 0.7 ± 0.3 0.9 ± 0.3 0.9 ± 0.3 1.1 ± 0.3 0.8 ± 0.3 0.8 ± 0.3 1.0 ± 0.3 1.0 ± 0.3 1.2 ± 0.3 1.0 ± 0.3 1.0 ± 0.3 1.2 ± 0.3 1.2 ± 0.3 1.4 ± 0.3 1.2 ± 0.3 1.2 ± 0.3 1.4 ± 0.3 1.4 ± 0.3 1.6 ± 0.3 1.4 ± 0.5 1.4 ± 0.5 1.6 ± 0.5 1.6 ± 0.5 1.8 ± 0.5 1.7 ± 0.5 1.7 ± 0.5 1.9 ± 0.5 1.9 ± 0.5 2.1 ± 0.5 2.1 ± 0.5 2.1 ± 0.5 2.3 ± 0.5 2.3 ± 0.5 2.5 ± 0.5 0.6 ± 0.3 0.6 ± 0.3 0.8 ± 0.3 0.8 ± 0.3 0.7 ± 0.3 0.7 ± 0.3 0.9 ± 0.3 0.9 ± 0.3 1.1 ± 0.3 0.9 ± 0.3 0.9 ± 0.3 1.1 ± 0.3 1.1 ± 0.3 1.3 ± 0.3 1.1 ± 0.3 1.1 ± 0.3 1.3 ± 0.3 1.3 ± 0.3 1.5 ± 0.3 UL 1449 ED3 SPD TYPE (7) CATALOG NUMBERS (1) SAP (6) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 VDRS05A014xyE VDRS07B014xyE VDRS10D014xyE VDRS14G014xyE VDRS20M014ByE VDRS05A017xyE VDRS07B017xyE VDRS10D017xyE VDRS14G017xyE VDRS20M017ByE VDRS05A020xyE VDRS07B020xyE VDRS10D020xyE VDRS14G020xyE VDRS20M020ByE VDRS05A025xyE VDRS07B025xyE VDRS10D025xyE VDRS14G025xyE VDRS20M025ByE VDRS05A030xyE VDRS07B030xyE VDRS10D030xyE VDRS14G030xyE VDRS20M030ByE VDRS05A035xyE VDRS07B035xyE VDRS10D035xyE VDRS14G035xyE VDRS20M035ByE VDRS05A040xyE VDRS07B040xyE VDRS10D040xyE VDRS14G040xyE VDRS20M040ByE VDRS05C050xyE VDRS07H050xyE VDRS10P050xyE VDRS14T050xyE VDRS05C060xyE VDRS07H060xyE VDRS10P060xyE VDRS14T060xyE VDRS20W060ByE VDRS05C075xyE VDRS07H075xyE VDRS10P075xyE VDRS14T075xyE VDRS20W075ByE VDRS05C095xyE VDRS07H095xyE VDRS10P095xyE VDRS14T095xyE VDRS20W095ByE Document Number: 29081 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM VOLTAGE (3) CONTINUOUS at 1 mA VOLTAGE RMS (2) (V) DC (V) (V) 130 170 205 140 180 220 150 200 240 175 225 275 230 300 360 250 320 390 275 350 430 300 385 470 320 420 510 350 460 560 385 505 620 Revision: 19-Jun-15 MAXIMUM VOLTAGE at STATED CURRENT V (V) 345 340 340 340 340 380 360 360 360 360 400 395 395 395 395 455 455 455 455 455 600 595 595 595 595 650 650 650 650 650 710 710 710 710 710 800 775 775 775 775 850 842 842 842 842 940 920 920 920 920 1025 1025 1025 1025 1025 I (A) 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 MAXIMUM NON-REP. TYPICAL MAXIMUM T TRANSIENT CAP. ENERGY (4) (5) (max.) CURRENT at 1 kHz (10 x 1 000 μs) INRP (8 x 20 μs) E (J) (A) (pF) (mm) (mm) 5.5 17.0 30.0 56.0 114.0 6.3 21.0 33.0 57.0 124.0 7.1 20.0 36.0 59.0 134.0 7.3 23.0 41.0 67.0 158.0 10.0 30.0 54.0 88.0 208.0 11.0 33.0 58.0 96.0 240.0 12.0 36.0 63.0 104.0 264.0 13.0 40.0 71.0 117.0 280.0 15.0 44.0 77.0 120.0 296.0 19.5 39.0 78.0 156.0 312.0 18.0 51.0 67.0 110.0 328.0 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 400 1200 2500 4500 6500 130 320 580 1050 2100 120 290 540 950 1900 110 270 490 850 1700 90 230 430 750 1500 70 170 320 540 1100 60 160 300 480 960 55 140 270 440 900 50 130 240 400 810 45 120 220 370 750 42 110 200 325 660 40 95 180 280 570 4.2 4.2 4.6 4.6 5.3 4.4 4.4 4.8 4.8 5.4 4.4 4.4 4.8 4.8 5.5 4.6 4.6 5.0 5.0 5.7 4.9 4.9 5.4 5.4 6.2 4.9 4.9 5.4 5.4 6.4 4.9 4.9 5.4 5.4 6.6 5.3 5.3 5.9 5.9 6.9 5.5 5.5 6.2 6.2 7.1 5.8 5.8 6.6 6.6 7.4 6.0 6.0 6.6 6.6 7.7 1.0 ± 0.3 1.0 ± 0.3 1.2 ± 0.3 1.2 ± 0.3 1.4 ± 0.3 1.0 ± 0.3 1.0 ± 0.3 1.2 ± 0.3 1.2 ± 0.3 1.5 ± 0.3 1.1 ± 0.3 1.1 ± 0.3 1.3 ± 0.3 1.3 ± 0.3 1.6 ± 0.3 1.3 ± 0.3 1.3 ± 0.3 1.5 ± 0.3 1.5 ± 0.3 1.7 ± 0.3 1.7 ± 0.8 1.7 ± 0.8 1.9 ± 0.8 1.9 ± 0.8 2.2 ± 0.8 1.9 ± 0.8 1.9 ± 0.8 2.1 ± 0.8 2.1 ± 0.8 2.3 ± 0.8 2.0 ± 0.8 2.0 ± 0.8 2.2 ± 0.8 2.2 ± 0.8 2.5 ± 0.8 2.2 ± 0.8 2.2 ± 0.8 2.4 ± 0.8 2.4 ± 0.8 2.7 ± 0.8 2.4 ± 0.8 2.4 ± 0.8 2.6 ± 0.8 2.6 ± 0.8 2.9 ± 0.8 2.7 ± 0.8 2.7 ± 0.8 2.9 ± 0.8 2.9 ± 0.8 3.2 ± 0.8 3.0 ± 0.8 3.0 ± 0.8 3.2 ± 0.8 3.2 ± 0.8 3.5 ± 0.8 UL 1449 ED3 SPD TYPE (7) CATALOG NUMBERS (1) SAP (6) 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 4 4 4 3 2 VDRS05C130xyE VDRS07H130xyE VDRS10P130xyE VDRS14T130xyE VDRS20W130ByE VDRS05C140xyE VDRS07H140xyE VDRS10P140xyE VDRS14T140xyE VDRS20W140ByE VDRS05C150xyE VDRS07H150xyE VDRS10P150xyE VDRS14T150xyE VDRS20W150ByE VDRS05C175xyE VDRS07H175xyE VDRS10P175xyE VDRS14T175xyE VDRS20W175ByE VDRS05C230xyE VDRS07H230xyE VDRS10P230xyE VDRS14T230xyE VDRS20W230ByE VDRS05C250xyE VDRS07H250xyE VDRS10P250xyE VDRS14T250xyE VDRS20W250ByE VDRS05C275xyE VDRS07H275xyE VDRS10P275xyE VDRS14T275xyE VDRS20W275ByE VDRS05C300xyE VDRS07H300xyE VDRS10P300xyE VDRS14T300xyE VDRS20W300ByE VDRS05C320xyE VDRS07H320xyE VDRS10P320xyE VDRS14T320xyE VDRS20W320ByE VDRS05C350xyE VDRS07H350xyE VDRS10P350xyE VDRS14T350xyE VDRS20W350ByE VDRS05C385xyE VDRS07H385xyE VDRS10P385xyE VDRS14T385xyE VDRS20W385ByE Document Number: 29081 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM VOLTAGE (3) CONTINUOUS at 1 mA VOLTAGE RMS (2) (V) DC (V) (V) 420 560 680 460 615 750 510 670 820 550 745 910 MAXIMUM VOLTAGE at STATED CURRENT V (V) 1120 1120 1120 1120 1120 1240 1240 1240 1240 1240 1355 1355 1355 1500 1500 1500 1650 1815 I (A) 5.0 10.0 25.0 50.0 100.0 5.0 10.0 25.0 50.0 100.0 25.0 50.0 100.0 25.0 50.0 100.0 100.0 100.0 MAXIMUM NON-REP. TYPICAL MAXIMUM T TRANSIENT CAP. ENERGY (4) (5) (max.) CURRENT at 1 kHz (10 x 1 000 μs) INRP (8 x 20 μs) E (J) (A) (pF) (mm) (mm) 20.0 56.0 73.0 120.0 344.0 21.0 63.0 82.0 135.0 360.0 89.0 145.0 376.0 98.0 160.0 408.0 448.0 496.0 400 1200 2500 4500 6500 400 1200 2500 4500 6500 2500 4500 6500 2500 4500 6500 6500 6500 35 85 165 250 510 30 75 150 225 460 135 220 450 120 180 370 320 270 6.1 6.1 6.6 6.6 8.1 6.4 6.4 6.8 6.8 8.5 7.2 7.2 8.9 7.9 7.9 9.5 10.1 10.6 3.2 ± 0.8 3.2 ± 0.8 3.4 ± 0.8 3.4 ± 0.8 3.7 ± 0.8 3.6 ± 0.8 3.6 ± 0.8 3.8 ± 0.8 3.8 ± 0.8 4.1 ± 0.8 4.1 ± 0.8 4.1 ± 0.8 4.4 ± 0.8 4.5 ± 0.8 4.5 ± 0.8 4.9 ± 0.8 5.3 ± 0.8 5.8 ± 0.8 UL 1449 ED3 SPD TYPE (7) CATALOG NUMBERS (1) SAP (6) 4 4 4 3 2 4 4 4 3 2 4 3 2 4 3 2 2 2 VDRS05C420xyE VDRS07H420xyE VDRS10P420xyE VDRS14T420xyE VDRS20W420ByE VDRS05C460xyE VDRS07H460xyE VDRS10P460xyE VDRS14T460xyE VDRS20W460ByE VDRS10P510xyE VDRS14T510xyE VDRS20W510ByE VDRS10P550xyE VDRS14T550xyE VDRS20W550ByE VDRS20W625ByE VDRS20W680ByE 625 825 1000 680 895 1100 Notes (1) The products are certified according to (c)UL (E332800), VDE (40002622) and CSA (219883) (2) The sinusoidal voltage is assumed as the normal operating condition. If a non-sinusoidal voltage is present, type selection should be based on multiplying the peak voltage by a factor of 0.707. (3) The voltage measured at 1 mA meets the requirements of IEC 61051. The tolerance on the voltage at 1 mA is ± 10 %. (4) High energy surges are generally of longer duration. The maximum energy for one pulse of 10 x 1000 μs is given as a reference for longer duration pulses. This pulse can be characterised by peak current (Ip) and pulse width t2 (virtual time of half Ip value, following IEC 60060-2, section 6 ). If Vp is the clamping voltage corresponding to Ip, the energy absorbed in the varistor is determined by the formula: E = K x Vp x Ip x t2 where: a) K is dependent on the value of t2 when the value of t1 is between 8 μs and 10 μs; see Peak Current as a Function of Pulse Width drawing. (5) A current wave of 8 x 20 μs is used as a standard for pulse current and clamping voltage ratings. The maximum non-repetitive transient current is given for one pulse applied during the life of the component. (6) For composition of the SAP part number: Replace “x” by B for bulk type Replace “y” by S for straight leads T for tape and reel F for straight leads with flange (bulk only) A for tape and ammopack G for straight leads with flange and H0 = 16 mm (tape and reel/ammo) H for straight leads with flange and H0 = 18.25 mm (tape and reel/ammo) K for kinked leads (bulk only) L for kinked leads with H0 = 16 mm (tape and reel/ammo) M for kinked leads with H0 = 18.25 mm (tape and reel/ammo) (7) All varistors are recognized under VZAC2 surge protective devices, components type 4 as specified in UL 1449 edition 3 for operation in ambient temperatures up to 85 °C. The parts with indication type 2 or 3 SPD’s, are tested and certified to be used in type 2 or 3 SPD applications with operating ambient temperatures up to 85 °C. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to underwriters laboratories Inc. Revision: 19-Jun-15 Document Number: 29081 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents ELECTRICAL CHARACTERISTICS ELECTRICAL DATA PARAMETER Maximum continuous voltage: RMS DC Maximum non-repetitive transient current (INRP) (8 x 20 μs) VDRS05 VDRS07 VDRS10 VDRS14 VDRS20 Thermal resistance: VDRS05 VDRS07 VDRS10 VDRS14 VDRS20 Maximum dissipation: VDRS05 VDRS07 VDRS10 VDRS14 VDRS20 Temperature coefficient of voltage at 1 mA maximum Voltage proof between interconnected leads and case Storage temperature Operating temperature DERATING CURVE VALUE UNIT 14 to 680 18 to 895 V V 100 or 400 250 or 1200 500 or 2500 1000 or 4500 2000 or 6500 A A A A A 80 70 60 50 40 K/W K/W K/W K/W K/W 100 250 400 600 1000 ± 0.05 2500 -40 to +125 -40 to +85 mW mW mW mW mW %/K VAC °C °C PEAK CURRENT AS A FUNCTION OF PULSE WIDTH Maximum Voltage Maximum Dissipation Maximum Energy Maximum Transient Current Ip (%) t2 (µs) K 100 90 20 50 100 1000 100 % 1 1.2 1.3 1.4 50 0 - 40 85 Tamb (°C) 10 0 125 t (µs) t1 t2 COMPONENT DIMENSIONS (BULK TYPE) in millimeters AND CATALOG NUMBERS D MAX. A MAX. A0 MAX. V 320 V V > 320 V V 300 V V > 300 V V 320 V V > 320 V L MIN. T (1) MAX. E (1) d F CATALOG NUMBER VDRS05 7.0 9.0 11.0 24.0 6.5 0.7 to 3.6 0.6 ± 0.05 5 ± 1.0 9.0 11.0 13.0 24.0 6.5 0.7 to 3.6 0.6 ± 0.05 5 ± 1.0 VDRS07 12.0 12.5 16.0 16.5 22.5 23.0 14.5 15.0 16.5 17.0 17.0 8.0 0.9 to 4.5 0.8 ± 0.05 7.5 ± 1.0 VDRS10 19.0 21.0 21.5 16.0 8.0 0.9 to 4.5 0.8 ± 0.05 7.5 ± 1.0 VDRS14 25.5 27.5 28.0 24.0 10.0 1.1 to 5.8 1.0 ± 0.05 10 ± 1.0 VDRS20 Note (1) T max. and E values per size and voltage level can be found back in the Electrical Data table Revision: 19-Jun-15 Document Number: 29081 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents VARISTORS IN BULK VDRS05... Ø 5 mm 14 V to 460 V VDRS07... Ø 7 mm 14 V to 460 V VDRS10... Ø 10 mm 14 V to 550 V VDRS14... Ø 14 mm 14 V to 550 V VDRS20... Ø 20 mm 14 V to 680 V Straight leads; see outline of components with straight leads drawing (1) BSE BSE BSE BSE BSE Straight leads with flange; see outline of components with flanged leads drawing BFE BFE - - - Kinked leads; see outline of components with kinked leads drawing BKE BKE BKE BKE BKE 14 V to 95 V 250 250 250 100 50 130 V to 385 V 250 250 250 100 50 420 V to 460 V 250 250 200 100 50 485 V to max. V - 250 150 100 50 TYPE Packaging quantities Note (1) Outline of the Ø 20 mm differs from the other dimensions DIMENSIONS in millimeters: See Component Dimensions and Electrical Data table Outline of component with straight leads D Outline of component with kinked leads T D T A A0 d L F L F E d Outline of component with flanged leads T D A0 0.3 F L d 1.4 to 1.6 E Revision: 19-Jun-15 Document Number: 29081 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents VARISTORS ON TAPE IN AMMOPACK VDRS05... Ø 5 mm 14 V to 460 V TYPE VDRS07... Ø 7 mm 14 V to 460 V VDRS10... Ø 10 mm 14 V to 550 V VDRS14... Ø 14 mm 14 V to 550 V Straight leads H = 18 mm - - ASE ASE H = 20 mm ASE ASE - - H0 = 16 mm AGE AGE - - H0 = 18.25 mm AHE AHE - - H0 = 18.25 mm AME AME AME AME H0 = 16 mm ALE ALE ALE ALE 14 V to 210 V 1500 (1) 1500 (1) 500 500 230 V to 510 V 1000 1000 500 500 - - 400 400 See drawing: taped version with straight leads Straight leads with flange See drawing: taped version with flanged leads Kinked leads See drawing: taped version with kinked leads Packaging quantities 550 V Note (1) Except for 35 V and 40 V = 1000 pieces DIMENSIONS OF AMMOPACK IN MILLIMETERS 340 max. 52 or 55 max. 250 max. Revision: 19-Jun-15 Document Number: 29081 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents VARISTORS ON TAPE AND REEL TYPE VDRS05... Ø 5 mm 14 V to 460 V VDRS07... Ø 7 mm 14 V to 460 V VDRS10... Ø 10 mm 14 V to 550 V VDRS14... Ø 14 mm 14 V to 550 V TSE TSE TSE - TSE - TGE THE TGE THE - - TME TLE TME TLE TME TLE TME TLE 1500 1500 1000 1000 1500 1500 1000 1000 1000 750 500 500 750 750 500 500 Straight leads H = 18 mm H = 20 mm See drawing: taped version with straight leads Straight leads with flange H0 = 16 mm H0 = 18.25 mm See drawing: taped version with flanged leads Kinked leads H0 = 18.25 mm H0 = 16 mm See drawing: taped version with kinked leads Packaging quantities 14 V to 250 V 275 V to 300 V 320 V to 350 V 385 V to max. V PACKAGING TAPED VERSION WITH STRAIGHT LEADS (only for VDRS05 and VDRS07) P D T Δp Δp Δh Δh A d W2 F L H W0 W1 W P0 P1 D0 T1 t TAPED VERSION WITH STRAIGHT LEADS (only for VDRS10 and VDRS14) P T Δp D Δp Δh Δh A d W2 H W0 W1 W F P1 P0 D0 T1 Revision: 19-Jun-15 t Document Number: 29081 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents TAPED VERSION WITH KINKED LEADS (only for VDRS10 and VDRS14) TAPED VERSION WITH KINKED LEADS (only for VDRS05 and VDRS07) P P D Δp Δp Δh T T Δp D Δp Δh Δh Δh A0 A0 d d W2 F W2 H0 L W0 W1 W H 0 P0 P1 W0 W1 W F D0 T1 Δp Δh Δh PARAMETER A max. Max. V 300 V mounting height V > 300 V 9.0 11.0 A0 max. Max. V 320 V mounting height V > 320 V 11.0 13.0 D max. Max. V 320 V body V > 320 V diameter 7.0 9.0 W2 H0 W0 W1 W P0 P1 D0 T1 DIMENSIONS/TOLERANCE SYMBOL d L t TAPING DATA (based on IEC 60286-2) A0 F D0 T1 T P Δp P0 t TAPED VERSION WITH FLANGED LEADS (only for VDRS05 and VDRS07) D P1 VDRS05 VDRS07 VDRS10 VDRS14 14.5 15.0 19.0 16.5 21.0 17.0 21.5 12.0 16.0 12.5 16.5 d Lead wire diameter 0.6 ± 0.05 0.8 ± 0.05 F Lead to lead distance (1) 5.0 + 0.8/- 0.2 7.5 ± 0.8 H Distance component to tape center (2) 20.0 + 2.0/- 0.0 18.0 + 2.0/- 0.0 H0 Lead wire clinch height P Pitch of components on tape T Total thickness t 16.0 or 18.25 ± 0.5 12.7 ± 1.0 25.4 ± 1.0 See Electrical Data table Notes (1) Guaranteed between component and tape (2) For VDRS14T510xSE and VDRS14T550xSE: H = 20 mm ± 1 mm Revision: 19-Jun-15 Document Number: 29081 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents V/I CHARACTERISTICS 14 VRMS to 40 VRMS; VDRS05 max. leakage current max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 100 10 10-5 10-4 10-3 10-2 10-1 1 102 10 CURRENT (A) 50 VRMS to 175 VRMS; VDRS05 max. leakage current max. clamping voltage 1000 VOLTAGE (V) 175 150 140 130 095 075 060 050 100 10 10-5 10-4 10-3 10-2 10-1 1 10 102 103 CURRENT (A) 230 VRMS to 460 VRMS; VDRS05 max. clamping voltage max. leakage current 420 385 350 320 300 275 250 VOLTAGE (V) 1000 100 10-5 10-4 10-3 10-2 10-1 1 10 102 103 CURRENT (A) Revision: 19-Jun-15 Document Number: 29081 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents 14 VRMS to 40 VRMS; VDRS07 max. leakage current max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 100 10 10-5 10-4 10-3 10-2 10-1 1 102 10 103 CURRENT (A) 50 VRMS to 175 VRMS; VDRS07 max. leakage current max. clamping voltage 1000 VOLTAGE (V) 175 150 140 130 095 075 060 050 100 10 10-5 10-4 10-3 10-2 10-1 1 10 102 103 CURRENT (A) 230 VRMS to 460 VRMS; VDRS07 max. leakage current max. clamping voltage 460 420 385 350 320 300 275 250 230 VOLTAGE (V) 1000 100 10-5 10-4 10-3 10-2 10-1 1 10 102 103 CURRENT (A) Revision: 19-Jun-15 Document Number: 29081 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents 14 VRMS to 40 VRMS; VDRS10 max. leakage current max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 100 10 10-5 10-4 10-3 10-2 10-1 1 102 10 103 CURRENT (A) 50 VRMS to 230 VRMS; VDRS10 max. leakage current max. clamping voltage VOLTAGE (V) 1000 230 175 150 140 130 095 075 060 050 100 10 10-5 10-4 10-3 10-2 10-1 1 10 102 103 104 CURRENT (A) 250 VRMS to 550 VRMS; VDRS10 max. leakage current max. clamping voltage 550 510 460 420 385 350 320 300 275 250 VOLTAGE (V) 1000 100 10-5 10-4 10-3 10-2 10-1 1 10 102 103 104 CURRENT (A) Revision: 19-Jun-15 Document Number: 29081 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents 14 VRMS to 40 VRMS; VDRS14 max. leakage current max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 100 10 10-5 10-4 10-3 10-2 10-1 1 10 102 103 CURRENT (A) 50 VRMS to 230 VRMS; VDRS14 max. clamping voltage max. leakage current VOLTAGE (V) 1000 230 175 150 140 130 095 075 060 050 100 10 10-5 10-4 10-3 10-2 10-1 1 10 102 103 104 CURRENT (A) 250 VRMS to 550 VRMS; VDRS14 max. leakage current max. clamping voltage 550 510 460 420 385 350 320 300 275 250 VOLTAGE (V) 1000 100 10-5 10-4 10-3 10-2 10-1 1 10 102 103 104 CURRENT (A) Revision: 19-Jun-15 Document Number: 29081 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents 14 VRMS to 40 VRMS; VDRS20 max. leakage current max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 100 10 10-5 10-4 10-3 10-2 10-1 1 102 10 103 CURRENT (A) 60 VRMS to 250 VRMS; VDRS20 max. clamping voltage max. leakage current 250 230 175 150 140 130 095 075 060 VOLTAGE (V) 1000 100 10 10-5 10-4 10-3 10-2 10-1 1 10 102 103 104 CURRENT (A) 275 VRMS to 680 VRMS; VDRS20 max. leakage current max. clamping voltage 680 625 550 510 460 420 385 350 320 300 275 VOLTAGE (V) 1000 100 10-5 10-4 10-3 10-2 10-1 1 10 102 103 104 CURRENT (A) Revision: 19-Jun-15 Document Number: 29081 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents MAXIMUM APPLICABLE TRANSIENT CURRENT AS A FUNCTION OF PULSE DURATION 14 VRMS to 40 VRMS; VDRS05 102 1 pulse 2 Ipulse max. (A) 10 102 103 104 105 106 10 1 10-1 102 10 tpulse 103 104 103 104 103 104 (μs) 50 VRMS to 460 VRMS; VDRS05 103 1 pulse 2 Ipulse max. (A) 102 10 102 103 104 105 106 10 1 10-1 102 10 tpulse (μs) 14 VRMS to 40 VRMS; VDRS07 103 1 pulse 2 Ipulse max. (A) 102 10 102 103 104 105 106 10 1 10-1 10 102 tpulse Revision: 19-Jun-15 (μs) Document Number: 29081 15 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents 50 VRMS to 510 VRMS; VDRS07 103 1 pulse 2 10 Ipulse max. (A) 102 102 103 104 105 106 10 1 10-1 102 10 tpulse 103 104 103 104 103 104 (μs) 14 VRMS to 40 VRMS; VDRS10 103 1 pulse 2 10 102 103 104 105 106 Ipulse max. (A) 102 10 1 102 10 tpulse (μs) 50 VRMS to 300 VRMS; VDRS10 104 1 pulse 2 103 Ipulse max. (A) 10 102 103 104 105 106 102 10 1 10 102 tpulse (μs) Revision: 19-Jun-15 Document Number: 29081 16 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents 320 VRMS to 680 VRMS; VDRS10 104 1 pulse 2 10 Ipulse max. (A) 103 102 103 104 105 106 102 10 1 102 10 tpulse 103 104 103 104 103 104 (μs) 14 VRMS to 40 VRMS; VDRS14 103 1 pulse Ipulse max. (A) 2 10 102 103 102 104 105 106 10 1 102 10 tpulse (μs) 50 VRMS to 300 VRMS; VDRS14 104 1 pulse 2 Ipulse max. (A) 103 10 102 103 104 105 106 102 10 1 10 102 tpulse Revision: 19-Jun-15 (μs) Document Number: 29081 17 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents 320 VRMS to 680 VRMS; VDRS14 104 1 pulse 2 Ipulse max. (A) 103 10 102 103 104 105 106 102 10 1 102 10 tpulse 103 104 103 104 103 104 (μs) 14 VRMS to 40 VRMS; VDRS20 104 Ipulse max. (A) 1 pulse 103 2 10 102 103 102 104 105 106 10 1 102 10 tpulse (μs) 60 VRMS to 300 VRMS; VDRS20 104 1 pulse 2 10 Ipulse max. (A) 103 102 103 104 105 106 102 10 1 10 102 tpulse (μs) Revision: 19-Jun-15 Document Number: 29081 18 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRS Series www.vishay.com Vishay BCcomponents 320 VRMS to 680 VRMS; VDRS20 104 1 pulse 2 10 Ipulse max. (A) 103 102 103 104 105 102 106 10 1 10 102 103 tpulse Revision: 19-Jun-15 104 (μs) Document Number: 29081 19 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000