V ishay I n tertech n o l o g y, I n c . Resistors - Wide Voltage Range and Energy Ratios AND TEC I INNOVAT O L OGY Vishay BCcomponents N HN VARISTORS (MOV) O 19 62-2012 VDR Metal Oxide Varistors Standard and High Surge Current KEY BENEFITS • • • • • • • Low leakage current Wide voltage range and energy ratios Low stand-by power Very good surge current handling capabilities Very good clamping voltage characteristics CSA, VDE, UL1414, and UL 1449 edition 3 approvals Selected voltage parts in large VDRH size UL recognized for 105°C usage APPLICATIONS • • • • • Power supplies Electronic lamp ballasts Inductive load switching: motors, coils, actuators, transformers, etc. Spark suppression General protection against induced lightning transients Resources • Datasheets: - http://www.vishay.com/doc?29081, http://www.vishay.com/doc?29082 • For technical questions contact [email protected] • Sales Contacts: http://www.vishay.com/doc?99914 V D E VDE (40002622 + 40013495) CSA (219833) (E332800) One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components selector guide 1/2 VMN-SG2043-1205 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I n tertech n o l o g y, I n c . Resistors - Wide Voltage Range and Energy Ratios Product Standard Series High-Surge Series Part V Max VDC Max Number RMS (V) (V) VDC @ 1 mA (V) Imax @ 8/20 µs Emax @ Pmax Non-Repetitive 10/1000 µs (mW) (A) (J) Ref. Diameter (mm) I INNOVAT AND TEC O L OGY Vishay BCcomponents N HN VARISTORS (MOV) O 19 62-2012 Applications VDRS 05 14 to 460 18 to 615 22 to 750 100 to 400 0.5 to 21 100 5 07 14 to 460 18 to 615 22 to 750 250 to 1200 1.7 to 63 250 7 10 14 to 550 18 to 745 22 to 910 500 to 2500 4.3 to 98 400 10 14 14 to 550 18 to 745 22 to 910 1000 to 4500 5.4 to 160 600 14 20 14 to 680 18 to 895 22 to 1100 2000 to 6500 8.0 to 496 1000 20 05 11 to 460 14 to 615 18 to 750 250 to 800 0.7 to 29 100 5 07 11 to 510 14 to 670 18 to 820 500 to 1750 1.5 to 60 250 7 10 11 to 680 14 to 895 18 to 1100 1000 to 3500 2.6 to 155 400 10 14 11 to 680 14 to 895 18 to 1100 2000 to 6000 5.2 to 310 600 14 20 11 to 680 14 to 895 18 to 1100 3000 to 10000 13 to 620 1000 20 VDRH selector guide 2/2 For transient and overvoltage protection in: • Consumer electronics • Power supplies • Lamp ballasts • Industrial equipment VMN-SG2043-1205 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000