TMCS www.vishay.com Vishay Polytech Solid Tantalum Surface Mount Chip Capacitors, Molded Case, Standard Industrial Grade FEATURES • Suitable for automatic mounting • Excellent frequency characteristics • Excellent impedance characteristics • Terminations: 100 % matte tin Available • MSL level: 1 PERFORMANCE / ELECTRICAL CHARACTERISTICS • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Range: 0.1 μF to 68 μF APPLICATIONS Capacitance Tolerance: ± 10 %, ± 20 % • Industrial Voltage Rating: 4 VDC to 35 VDC • General purpose Available ORDERING INFORMATION TMCS C 1C 106 M TR (2) F TYPE CASE CODE DC VOLTAGE RATING AT +85 °C CAPACITANCE (μF) CAPACITANCE TOLERANCE PACKAGING POLARITY (OPTIONAL) TERMINAL CODE See Ratings and Case Codes table 0G = 4 V 0J = 7 V 1A = 10 V 1C = 16 V 1D = 20 V 1E = 25 V 1V = 35 V This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % TR = 7" reel, cathodes close to perforation side Halogen-free (special order), not applicable for E case F = lead (Pb)-free terminations DIMENSIONS in inches [millimeters] Anode indication belt mark L A, B, C case E case W a l l l H l a W a CASE CODE EIA SIZE L 0.126 ± 0.008 [3.2 ± 0.2] W 0.063 ± 0.008 [1.6 ± 0.2] H 0.063 ± 0.008 [1.6 ± 0.2] l 0.028 ± 0.012 [0.7 ± 0.3] a 0.047 ± 0.008 [1.2 ± 0.2] A 3216-18 B 3528-21 0.138 ± 0.008 [3.5 ± 0.2] 0.110 ± 0.008 [2.8 ± 0.2] 0.075 ± 0.008 [1.9 ± 0.2] 0.030 ± 0.012 [0.8 ± 0.3] 0.087 ± 0.008 [2.2 ± 0.2] C 5832-27 0.228 ± 0.008 [5.8 ± 0.2] 0.126 ± 0.008 [3.2 ± 0.2] 0.100 ± 0.008 [2.5 ± 0.2] 0.051 ± 0.012 [1.3 ± 0.3] 0.087 ± 0.008 [2.2 ± 0.2] E 7343-30 0.287 ± 0.008 [7.3 ± 0.2] 0.169 ± 0.012 [4.3 ± 0.3] 0.112 ± 0.008 [2.8 ± 0.2] 0.051 ± 0.012 [1.3 ± 0.3] 0.094 ± 0.008 [2.4 ± 0.2] Revision: 08-Apr-15 Document Number: 40177 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCS www.vishay.com Vishay Polytech RATINGS AND CASE CODES μF 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 4V 7V 10 V 16 V 20 V 25 V 35 V A A A A B B B C C C E E A A A A B A B A B B C B C B C E C E C E C E E E MARKING A, B Case C, E Case Anode indication belt mark Anode indication belt mark A7 A + + Simplified code of nominal capacitance (A7: 10 μF) Nominal capacitance value (10 μF) 16A Date code Rated voltage (16 V) SIMPLIFIED CAP CODES, CASES A, B CAPACITANCE μF 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 CAPACITANCE CODE 104 154 224 334 474 684 105 155 225 Date code CAPACITANCE μF 3.3 4.7 6.8 10 15 22 33 47 68 CAPACITANCE CODE 335 475 685 106 156 226 336 476 686 DATE CODE YEAR 2013 2014 2015 2016 MONTH 1 A N a n Revision: 08-Apr-15 2 B P b p 3 C Q c q 4 D R d r 5 E S e s 6 F T f t 7 G U g u 8 H V h v 9 J W j w 10 K X k x 11 L Y l y 12 M Z m z Document Number: 40177 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCS www.vishay.com Vishay Polytech STANDARD RATINGS CAPACITANCE (μF) CASE CODE 3.3 10 33 68 A B C E 2.2 6.8 22 47 A B C E 1.5 4.7 15 33 A B C E 1.0 3.3 10 22 A B C E 0.68 2.2 6.8 15 A B C E 0.47 1.5 4.7 10 A B C E 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 A A A A B B B C C C E E PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF MAX. ESR AT +25 °C 120 Hz AT +25 °C 100 kHz (%) (Ω) 4 VDC AT +85 °C, 2.5 VDC AT +125 °C TMCSA0G335(1)TRF 0.5 6.0 TMCSB0G106(1)TRF 0.5 6.0 TMCSC0G336(1)TRF 1.3 6.0 TMCSE0G686(1)TRF 2.7 6.0 7 VDC AT +85 °C, 4 VDC AT +125 °C TMCSA0J225(1)TRF 0.5 6.0 TMCSB0J685(1)TRF 0.5 6.0 TMCSC0J226(1)TRF 1.5 6.0 TMCSE0J476(1)TRF 3.3 6.0 10 VDC AT +85 °C, 6.3 VDC AT +125 °C TMCSA1A155(1)TRF 0.5 6.0 TMCSB1A475(1)TRF 0.5 6.0 TMCSC1A156(1)TRF 1.5 6.0 TMCSE1A336(1)TRF 3.3 6.0 16 VDC AT +85 °C, 10 VDC AT +125 °C TMCSA1C105(1)TRF 0.5 4.0 TMCSB1C335(1)TRF 0.5 6.0 TMCSC1C106(1)TRF 1.6 6.0 TMCSE1C226(1)TRF 3.5 6.0 20 VDC AT +85 °C, 13 VDC AT +125 °C TMCSA1D684(1)TRF 0.5 4.0 TMCSB1D225(1)TRF 0.5 6.0 TMCSC1D685(1)TRF 1.4 6.0 TMCSE1D156(1)TRF 3.0 6.0 25 VDC AT +85 °C, 16 VDC AT +125 °C TMCSA1E474(1)TRF 0.5 4.0 TMCSB1E155(1)TRF 0.5 6.0 TMCSC1E475(1)TRF 1.2 6.0 TMCSE1E106(1)TRF 2.5 6.0 35 VDC AT +85 °C, 22 VDC AT +125 °C TMCSA1V104(1)TRF 0.5 4.0 TMCSA1V154(1)TRF 0.5 4.0 TMCSA1V224(1)TRF 0.5 4.0 TMCSA1V334(1)TRF 0.5 4.0 TMCSB1V474(1)TRF 0.5 4.0 TMCSB1V684(1)TRF 0.5 4.0 TMCSB1V105(1)TRF 0.5 4.0 TMCSC1V155(1)TRF 0.5 6.0 TMCSC1V225(1)TRF 0.8 6.0 TMCSC1V335(1)TRF 1.2 6.0 TMCSE1V475(1)TRF 1.6 6.0 TMCSE1V685(1)TRF 2.4 6.0 MAX. RIPPLE, 100 kHz IRMS (A) 4.0 1.7 1.1 0.6 0.140 0.238 0.302 0.447 4.4 2.8 1.1 0.9 0.133 0.185 0.302 0.365 4.4 2.8 2.2 0.9 0.133 0.185 0.213 0.365 6.6 3.9 1.7 0.9 0.109 0.157 0.243 0.365 9.7 3.9 1.7 0.9 0.090 0.157 0.243 0.365 16.5 3.9 2.8 2.0 0.069 0.157 0.189 0.245 38.5 38.5 38.5 22.0 19.8 8.8 3.9 5.0 5.0 3.9 2.8 1.7 0.045 0.045 0.045 0.060 0.070 0.104 0.157 0.141 0.141 0.160 0.207 0.266 Note • Part number definition: (1) Tolerance: For 10 % tolerance, specify “K”; for 20 % tolerance, change to “M” RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below +85 °C) CAPACITOR VOLTAGE RATING 4.0 7.0 10 16 20 25 35 Revision: 08-Apr-15 OPERATING VOLTAGE 2.0 3.5 5.0 8.0 10 12.5 17.5 Document Number: 40177 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCS www.vishay.com Vishay Polytech POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR A 0.078 B 0.096 C 0.100 E 0.120 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER 7" REEL A 2000 B 2000 C 500 E 500 PERFORMANCE CHARACTERISTICS ITEM CONDITION POST TEST PERFORMANCE Capacitance change Temperature characteristics Measure the specified characteristics in each stage Dissipation factor (%) Leakage current Solder heat resistance Moisture resistance no load Solder dip: 260 °C ± 5 °C A, B case: 10 s ± 1 s C, E case: 5 s ± 0.5 s Reflow 260 °C, 10 s ± 1 s Leave at 40 °C and 90 % to 95 % RH for 500 h Specified initial value -55 °C +85 °C +125 °C - -10 % to 0 % 0 % to +10 % 0 % to +12 % 4 4 5 5 6 6 7 7 - Not more than 0.1 CV or 5 μA whichever is greater Not more than 0.125 CV or 6.25 μA whichever is greater Not more than 0.01 CV or 0.5 μA whichever is greater Capacitance change Within ± 5 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed initial specified value Capacitance change Within ± 5 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed initial specified value Capacitance change Within ± 10 % of initial value Dissipation factor Shall not exceed initial specified value High temperature load 85 °C. The rated voltage is applied for 2000 h Leakage current Shall not exceed 125 % of initial specified value Capacitance change Within ± 5 % of initial value Dissipation factor Shall not exceed initial specified value Thermal shock Leave at -55 °C, normal temperature, 125 °C, and normal temperature for 30 min, 3 min, 30 min, and 3 min. Repeat this operation 20 times running Leakage current Shall not exceed initial specified value Moisture resistance load Leave at 40 °C and 90 % to 95 % RH. The rated voltage applied for 500 h Capacitance change Within ± 10 % of initial value Dissipation factor Shall not exceed 150 % of initial specified value Leakage current Shall not exceed 125 % of initial specified value Failure rate 85 °C. The rated voltage is applied through a protective resistor of 1 Ω/V 1 % / 1000 h Note • Test conditions per JIS C5101-1 Revision: 08-Apr-15 Document Number: 40177 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000