LTO 50 Datasheet

LTO 50
www.vishay.com
Vishay Sfernice
Power Resistor Thick Film Technology
FEATURES
• 50 W at 25 °C case temperature heatsink
mounted
• Direct mounting ceramic on heatsink
• Broad resistance range: 0.010  to 550 k
• Non inductive
• TO-220 package: Compact and easy to mount
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
LTO series are the extension of RTO types. We used the
direct ceramic mounting design (no metal tab) of our RCH
power resistors applied to semiconductor packages.
DIMENSIONS in millimeters
3.2
10.4
3.2
16.2
Ø 3.2
1.3
3.5
12.7
0.8
0.6
1.8
5 08
Note
• Tolerances unless stated: ± 0.3 mm
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE
RANGE

LTO 50
TO-220
0.010 to 550K
TEMPERATURE
COEFFICIENT
± ppm/°C
CRITICAL
RESISTANCE

150, 250, 700, 900
5K
RATED POWER LIMITING ELEMENT
TOLERANCE
P25 °C
VOLTAGE UL
±%
W
V
50
500
1, 2, 5, 10
MECHANICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Mechanical Protection
Dissipation and Associated
Resistive Element
Substrate
Connections
Weight
Mounting Torqure
Molded
Thick film
Alumina
Tinned copper
2 g max.
Power Rating and 
Thermal Resistance 
of the Component
Temperature Coefficient
1 Nm
Standard
Onto a heatsink
50 W at + 25 °C (case temp.)
RTH (j - c): 2.5 °C/W
Free air:
2.5 W at + 25 °C
See Performance table
± 150 ppm/°C
ENVIRONMENTAL SPECIFICATIONS
Dielectric Strength 
MIL STD 202
1500 VRMS - 1 min
10 mA max.
Temperature Range
Insulation Resistance
 104 M
Inductance
 0.1 μH
Climatic Category
Flammability
Revision: 01-Aug-13
- 55 °C to + 155 °C
55/155/56
IEC 60695-11-5
2 applications 30 s
separated by 60 s
Document Number: 50050
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LTO 50
www.vishay.com
Vishay Sfernice
PERFORMANCE
TESTS
CONDITIONS
REQUIREMENTS
EN 60115-1
1.5 Pr/5 s
US < 1.5 UL
± (0.5 % + 0.005 )
EN 60115-1
IEC 60068-2-14 Test Na
5 cycles
- 55 °C to + 155 °C
± (0.5 % + 0.005 )
EN 60115-1
1000 h Pr at + 25 °C
± (1 % + 0.005 )
MIL-STD-202
method 103 B cond. D
± (0.5 % + 0.005 )
Vibration
MIL-STD-202
method 204 cond. D
± (0.2 % + 0.005 )
Terminal Strength
MIL-STD-202
method 211 cond. A1
± (0.2 % + 0.005 )
100G, MIL-STD-202
method 213 cond. I
± (0.5 % + 0.005 )
Momentary Overload
Rapid Temperature Change
Load Life
Humidity (Steady State)
Shock
SPECIAL FEATURES
 0.010
Resistance Values
 0.015
Tolerances
Typical Temperature Coefficient
(- 55 ° to + 155 °C)
 0.1
 0.5
± 250 ppm/°C
± 150 ppm/°C
± 1 % at ± 10 %
± 900 ppm/°C
± 700 ppm/°C
CHOICE OF THE HEATSINK
The user must choose according to the working conditions of the component (power, room temperature). 
Maximum working temperature must not exceed 150 °C. The dissipated power is simply calculated by the following ratio:
1
T
P = ------------------------------------------------------------------------------------------R TH (j - c) + R TH (c - h) + R TH (h - a)
P: Expressed in W 
T: Difference between maximum working temperature and room
temperature 
RTH (j - c): Thermal resistance value measured between resistive layer
and outer side of the resistor. It is the thermal resistance of the
component.
RTH (c - h): Thermal resistance value measured between outer side of
the resistor and upper side of the heatsink. This is the thermal
resistance of the interface (grease, thermal pad), and the quality of
the fastening device.
RTH (h - a): Thermal resistance of the heatsink.
Example: 
RTH (c - a) for LTO 50 power rating 10 W at ambient temperature + 25 °C
Thermal resistance RTH (j - c): 2.5 °C/W 
Considering equation (1) we have:
T = 150 °C - 25 °C = 125 °C 
T
125
- = -------- = 12.5 °C/W
RTH (j - c) + RTH (c - h) + RTH (h - a) = ----P
10
RTH (c - h) + RTH (h - a) = 12.5 °C/W - 2.5 °C/W = 10 °C/W
with a thermal grease RTH (c - h) = 1 °C/W, we need a heatsink with RTH (h - a) = 9 °C/W.
Revision: 01-Aug-13
Document Number: 50050
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LTO 50
www.vishay.com
Vishay Sfernice
OVERLOADS
POWER RATING
In any case the applied voltage must be lower than the
maximum overload voltage of 750 V.
The values indicated on the graph below are applicable to
resistors in air or mounted onto a heatsink.
The temperature of the case should be maintained within the
limits specified. 
To improve the thermal conductivity, surfaces in contact
should be coated with a silicone grease and the torque
applied on the screw for tightening should be around 1 Nm.
ENERGY CURVE
125
RATED POWER IN %
ENERGY IN JOULES
100
10
1
0.1
0.01
10-7
10-6
10-5
10-4
10-3
10-2
10-1
100
OVERLOAD DURATION IN s
100
75
50
25
0
0
20
40
60
80
100
120
140 150
CASE TEMPERATURE IN °C
POWER CURVE
1 000 000
PACKAGING
Tube of 50 units
POWER IN W
100 000
MARKING
10 000
Model, style, resistance value (in ), tolerance (in %),
manufacturing date, Vishay Sfernice trademark.
1000
100
10-7
10-6
10-5
10-4
10-3
10-2
10-1
100
OVERLOAD DURATION IN s
Revision: 01-Aug-13
Document Number: 50050
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LTO 50
www.vishay.com
Vishay Sfernice
ORDERING INFORMATION
LTO
50
F
2.7 k
±1%
xxx
TU50
e3
MODEL
STYLE
CONNECTIONS
RESISTANCE VALUE
TOLERANCE
CUSTOM DESIGN
Optional
on request:
Special TCR,
shape etc.
PACKAGING
LEAD (Pb)-FREE
±1%
±2%
±5%
± 10 %
GLOBAL PART NUMBER INFORMATION
L
T
O
0
5
0
F
2
7
0
0
0
J
T
E
3
GLOBAL
MODEL
SIZE
LEADS
OHMIC VALUE
TOLERANCE
PACKAGING
LEAD (Pb)-FREE
LTO
050
F = Radial leads
The first four digits are
significant figures and the
last digit specifies the
number of zeros to follow.
R designates decimal point.
48R70 = 48.7 
48701 = 48 700 
10002 = 100 000 
R0100 = 0.01 
R4700 = 0.47 
27000 = 2700  = 2.7 k
F=1%
G=2%
J=5%
K = 10 %
T = Tube
E3 = Pure tin
Revision: 01-Aug-13
Tube 50 pieces
Document Number: 50050
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000