AVE www.vishay.com Vishay Huntington Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Edgewound Tubular FEATURES • High temperature vitreous coating • Complete welded construction • Tight tolerance of 5 % for values above 1 • Excellent stability in operation (< 3 % change in resistance) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RANGE RESISTANCE RANGE GLOBAL MODEL HISTORICAL MODEL POWER RATING P25 °C W ±5% ± 10 % AVE0050 AVE-50 50 1.0 to 3.8 1.0 to 3.8 WEIGHT (typical) g 18 AVE0090 AVE-90 90 0.10 to 5.7 0.10 to 5.7 36 AVE0100 AVE-100 100 1.0 to 6.1 0.15 to 6.1 41 AVE0110 AVE-110 110 1.0 to 7.4 0.20 to 7.4 49 AVE0120 AVE-120 120 1.0 to 8.6 0.1 to 8.6 54 AVE0155 AVE-155 155 1.0 to 12.5 0.1 to 12.5 129 AVE0240 AVE-240 240 1.0 to 18 0.1 to 18 186 AVE0300 AVE-300 300 1.0 to 25 0.15 to 25 236 AVE0375 AVE-375 375 1.0 to 32 0.20 to 32 286 AVE0420 AVE-420 420 1.0 to 35.8 0.25 to 35.8 320 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: AVE030020E15R0KE92 (visit www.vishay.net SAP parts manual for all options) A V E GLOBAL MODEL (7 digits) 0 3 0 0 TERMINAL DESIGNATION (2 digits) TERMINAL FINISH (1 digit) 06 15 20 E = Lead (Pb)-free (See Standard Electrical Specifications Global Model column for options) 2 0 E 1 5 R 0 K E 9 2 VALUE (4 digits) TOLERANCE (1 digit) PACKAGING CODE (1 digit) SPECIAL (up to 2 digits) R = Decimal K = Thousand 1R50 = 1.5 1K50 = 1.5 k J=±5% K = ± 10 % E = Lead (Pb)-free cell and bulk pack (Dash number) From 1 to 99 as applicable 91 = 100 style horizontal thru-bolt bracket 92 = 200 style push-in bracket 93 = 300 style vertical thru-bolt bracket Historical Part Number example: AVE-300-15-10%-BKTS AVE-300 15 10 % BKTS HISTORICAL MODEL RESISTANCE VALUE TOLERANCE SPECIAL Revision: 23-Mar-15 Document Number: 31850 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AVE www.vishay.com Vishay Huntington DIMENSIONS in inches [millimeters] TERMINAL SETBACK DISTANCE CENTER TO CENTER CORE DIMENSIONS LENGTH ± 0.062 [± 1.57] O.D. ± 0.031 [± 0.79] I.D. ± 0.031 [± 0.79] TERMINAL SETBACK DISTANCE CENTER TO CENTER (REF.) AVE0050 2.000 [50.8] 0.750 [19.05] 0.500 [12.70] 0.094 [2.18] AVE0090 4.000 [101.6] 0.562 [14.27] 0.312 [7.92] AVE0100 3.500 [88.90] 0.750 [19.05] AVE0110 4.000 [101.6] AVE0120 TERMINAL DESIGNATION SLIDER MODEL NUMBER STANDARD OPTIONAL (QUICK CONNECT) 1.562 [39.67] 06 15 71 0.094 [2.38] 3.562 [90.47] 06 15 71 0.500 [12.70] 0.079 [2.39] 3.092 [78.54] 06 15 74 0.750 [19.05] 0.500 [12.70] 0.125 [2.01] 3.500 [88.90] 06 15 74 4.500 [114.3] 0.750 [19.05] 0.547 [13.89] 0.125 [3.18] 4.000 [101.60] 06 15 74 AVE0155 4.250 [107.95] 1.125 [28.58] 0.750 [19.05] 0.282 [7.16] 3.311 [84.10] 20 15 74 AVE0240 6.500 [165.1] 1.125 [28.58] 0.750 [19.05] 0.282 [7.16] 5.625 [142.88] 20 15 75 AVE0300 8.500 [215.9] 1.125 [28.58] 0.750 [19.05] 0.267 [6.78] 7.591 [192.81] 20 15 75 AVE0375 10.500 [266.7] 1.125 [28.58] 0.750 [19.05] 0.266 [6.76] 9.593 [243.66] 20 15 75 AVE0420 11.750 [298.45] 1.125 [28.58] 0.750 [19.05] 0.266 [6.76] 10.843 [275.41] 20 15 76 MODEL TERMINAL DIMENSIONS in inches [millimeters] DIMENSIONS D A C Style 06 and 20 Revision: 23-Mar-15 A D C B Styles 15 B TERMINAL STYLE 06 15 20 A 0.250 [6.35] 0.250 [6.35] 0.375 [9.53] B 0.500 [12.70] 0.594 [15.08] 0.5625 [14.28] C (HOLE DIAMETER) 0.173 [4.39] 0.065 [1.65] 0.204 [5.18] D 0.020 [0.51] 0.031 [0.79] 0.032 [0.812] Document Number: 31850 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AVE www.vishay.com Vishay Huntington AVE SLIDERS-DIMENSIONS in inches [millimeters] DIMENSIONS GLOBAL MODEL (OF RESISTOR) SLIDER MODEL NUMBER WIDTH HEIGHT HOLE DIAMETER 75008603E29 ASE0050, ASE0090 71 0.250 [6.35] 0.719 [18.26] 0.141 [3.58] 75025201E29 ASE0100, ASE0110, ASE0120, ASE0155 74 0.312 [7.92] 0.891 [22.63] 0.196 [4.98] 75025203E29 ASE0240, ASE0300, ASE0375 75 0.500 [12.70] 0.891 [22.63] 0.265 [6.73] 75025206E29 ASE0420 76 0.312 [7.92] 0.891 [22.63] 0.196 [4.98] GLOBAL PART NUMBER (1) (RoHS COMPLIANT) Note (1) Order HEI slider with global part number. MOUNTING HARDWARE FOR AVT PRODUCTS - Dimensions in inches [millimeters] 91 = 100 Style Horizontal 1 High Bracket 93 = 300 Style Thru-Bolt Bracket B H 0.046 (1.17) C Core length plus “X” BRACKET TYPE X Y Z H MOUNTING SLOT C B 101 1.063 0.500 0.950 1.000 0.219 x 0.438 0.750 1.375 [26.99] [12.70] [24.13] [25.40] [5.56 x 11.11] [19.05] [34.93] 102 1.063 0.750 0.859 1.250 0.219 x 0.438 0.750 1.750 [26.99] [19.05] [21.83] [31.75] [5.56 x 11.11] [19.05] [44.75] 103 1.063 1.250 1.000 1.500 0.281 x 0.563 0.927 2.125 [26.99] [31.75] [25.40] [38.10] [7.14 x 14.29] [23.55] [53.98] 92 = 200 Style Push-In Bracket BRACKET TYPE X (APPROXIMATE) THREAD 302 0.271 [6.88] 10-32 303 0.463 [11.76] 1/4-20 MOUNTING HARDWARE AVAILABLE BRACKET TYPES BY MODEL GLOBAL MODEL Z Y BRACKET TYPE 204 206 207 H Core length plus “X” X H Y Z 91 = 100 STYLE HORIZONTAL 1 HIGH BRACKET 92 = 200 STYLE PUSH-IN BRACKET 93 = 300 STYLE THRU-BOLT BRACKET AVE0050 102 206 302 HOLE (DIA.) AVE0090 102 204 302 AVE0100 102 206 302 0.700 [17.78] 0.578 [14.68] 0.250 [6.35] 0.500 [12.70] 0.156 [3.96] AVE0110 102 206 302 AVE0120 102 206 302 0.846 [21.49] 0.800 [20.62] 0.375 [9.53] 0.600 [15.24] 0.343 x 0.213 [8.71 x 5.46] AVE0155 103 207 302 AVE0240 103 207 302 0.700 [17.78] 1.125 [28.58] 0.500 [12.70] 0.687 [17.45] 0.250 x 0.188 [6.35 x 4.78] AVE0300 103 207 303 AVE0375 103 207 303 AVE0420 103 207 303 Revision: 23-Mar-15 Document Number: 31850 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AVE www.vishay.com Vishay Huntington TECHNICAL SPECIFICATIONS PARAMETER UNIT RESISTOR CHARACTERISTICS Power Rating W 50 to 420 Resistance Range 0.10 to 35.8 Resistance Tolerance % 10 Temperature Coefficient ppm/°C ± 260 for 20 and above, ± 400 for 1 to 19.99 Operating Temperature °C -55 °C to 350 °C Temperature Rise °C 325 °C above an ambient of 25 °C Maximum Altitude f.a.s.l. 10 000 Short-Term Overload - 10x rated power for 5 s Surge Windings - Available Maximum Working Voltage - (P x R)0.5 1M VRMS 1000 VAC Creepage - Varies by wattage, see “Terminal Setback” in Dimensions table Terminal Sleeves - n/a μH Varies by wattage and resistance Insultation Resistance Dielectric Voltage Inductance Non-Inductive Winding - n/a Terminal Strength lb 10 lbs Electrical or Mechanical Customization - Contact factory: [email protected] MATERIAL SPECIFICATIONS Element Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core Cordierite, steatite Coating Special high temperature vitreous enamel Standard Terminals Tinned alloy 42 Optional Terminals Alloy 42 Terminal Bands Alloy 42 Part Marking HEI, model, wattage, value, tolerance, date code RATED POWER IN % DERATING 120 100 80 60 40 20 0 0 50 100 150 200 250 300 350 25 AMBIENT TEMPERATURE IN °C Revision: 23-Mar-15 Document Number: 31850 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000