BSI www.vishay.com Vishay Sfernice Molded and Insulated Wirewound Power Resistors Axial Leads FEATURES • 1 W to 10 W • Excellent stability = Typical drift ± 1 % after 2000 h • High power = Up to 10 W (25 °C) • Low ohmic values = 0.01 available • Electrical insulation • Climatic protection • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters 25 min. A ØC MOLDED 25 min. SERIES AND STYLE A ØB 58BSI 6.5 ± 0.2 2.4 ± 0.1 INSULATED 25 min. A ØB ØE 45° chamfer max. 0.25 deep WEIGHT (g) 0.3 Ø 1.2 63BSI 10 ± 0.2 3.7 ± 0.1 68BSI 15 ± 0.5 5.6 ± 0.2 516BSI 17 ± 2 5.5 ± 1 1.6 523BSI 24 ± 2 5.5 ± 1 2.5 923BSI 26 ± 2 10 ± 1.5 932BSI 34 ± 3 10 ± 1.5 7.5 947BSI 51 ± 3 10 ± 1.5 10 INSULATED ± 0.02 4 4 ØC ± 0.1 0.6 ØB 25 min. PROTECTION L 0.45 0.8 1.3 PROTECTION 0.8 6 STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RANGE RATED POWER P25 °C W LIMITING ELEMENT VOLTAGE V TOLERANCE ±% TEMPERATURE COEFFICIENT ± ppm/°C MODEL SIZE 58BSI 058 0.1 to 2K 1 50 0.5, 1, 2, 5 100, 300 63BSI 063 0.025 to 4K 2 120 0.5, 1, 2, 5 100, 300 68BSI 068 0.01 to 15K 3 200 0.5, 1, 2, 5 100, 300 516BSI 516 0.01 to 20K 4 200 0.5, 1, 2, 5 100, 300 523BSI 523 0.015 to 40K 5 250 0.5, 1, 2, 5 100, 300 923BSI 923 0.02 to 60K 6 300 0.5, 1, 2, 5 100, 300 932BSI 932 0.035 to 100K 8 500 0.5, 1, 2, 5 100, 300 947BSI 947 0.06 to 150K 10 750 0.5, 1, 2, 5 100, 300 TECHNICAL SPECIFICATIONS VISHAY SFERNICE SERIES Ohmic Range in Relation to Temperature Coefficient Revison: 05-Aug-13 58BSI 63BSI 68BSI 516BSI 523BSI 923BSI 932BSI 947BSI ± 100 ppm/°C ± 0.5 % ±5% 0.1 2 k 0.1 4 k 0.1 15 k 0.1 20 k 0.1 40 k 0.1 60 k 0.1 100 k 0.1 150 k ± 300 ppm/°C ±1% ±5% - 0.025 < 0.1 0.01 < 0.1 0.01 < 0.1 0.015 < 0.1 0.02 < 0.1 0.035 < 0.1 0.06 < 0.1 Document Number: 50011 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BSI www.vishay.com Vishay Sfernice MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Mechanical Protection Temperature Range Molded or painted (insulated) Resistive Element CuNi or CrNi Substrate - 55 °C to + 275 °C Climatic Category 55/200/56 Alumina Connections Sn/Ag/Cu 99/0.3/0.7 PERFORMANCE TESTS Dielectric Strength Short Time Overload Endurance CONDITIONS REQUIREMENTS TYPICAL VALUES AND DRIFTS IEC 60115-1 1000 VRMS for 923 to 947 500 VRMS for 58 to 523 ± (0.1 % + 0.05 ) ± (0.1 % + 0.05 ) IEC 60115-1 5 Pn/5 s for Pr < 5 W 10 Pn/5 s for Pr 5 W ± (0.2 % + 0.05 ) ± (0.1 % + 0.05 ) IEC 60115-1 90’/30’ Pr at 25 °C, 2000 h ± (1 % + 0.05 ) ± (0.1 % + 0.05 ) 250 h at 275 °C ± (0.5 % + 0.05 ) ± (0.3 % + 0.05 ) Load at 100 % Pr followed by cold temp. exposure at - 55 °C ± (0.2 % + 0.05 ) ± (0.1 % + 0.05 ) IEC 60115-1 - 55 °C/+ 200 °C 5 cycles ± (0.5 % + 0.05 ) Insulation resistance 100 M ± (0.3 % + 0.05 ) Insulation resistance > 10 G IEC 60115-1/IEC 60068-2-78 56 days, 40 °C, 93 % RH ± (0.5 % + 0.05 ) Insulation resistance 100 M ± (0.3 % + 0.05 ) Insulation resistance > 10 G MIL-STD-202 method 106 ± (0.2 % + 0.05 ) Insulation resistance 100 M ± (13 % + 0.05 ) Insulation resistance > 10 G Shock MIL-STD-202 100 g method 205 - test C ± (0.1 % + 0.05 ) ± (0.05 % + 0.05 ) Vibration MIL-STD-202 method 204 - Test D: 20 g 10Hz/2000 Hz ± (0.1 % + 0.05 ) ± (0.05 % + 0.05 ) Endurance at High Temperature Thermal Shock Climatic Sequence Damp Heat, Steady State Moisture Resistance POWER RATING TEMPERATURE RISE 58 63 HOT SPOT TEMPERATURE IN °C RATED POWER IN % 125 100 75 50 37 25 68 516 523 923 932 947 250 200 150 100 50 0 0 0 50 100 150 200 250 275 300 AMBIENT TEMPERATURE IN °C 350 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RATED POWER IN W MARKING GEKA trademark, model, style, nominal resistance (in ), tolerance (in %), manufacturing date. Because of lack of space, small styles are marked with ohmic value (in ), and tolerance (in %) only. Revison: 05-Aug-13 Document Number: 50011 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BSI www.vishay.com Vishay Sfernice ORDERING INFORMATION BSI 63 U22 2% ± 100 ppm/°C TR300 e1 MODEL STYLE OHMIC VALUE TOLERANCE TEMPERATURE COEFFICIENT PACKAGING LEAD (Pb)-FREE GLOBAL PART NUMBER INFORMATION B GLOBAL MODEL BSI S I 0 6 3 2 R 8 7 0 F R 2 2 SIZE OHMIC VALUE TOLERANCE PACKAGING SPECIAL 058 063 068 516 523 923 932 947 The first digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. D = 0.5 % F=1% G=2% J=5% Size 058: R26 = Reel (5000 pieces) Size 063: R22 = Reel (3000 pieces) Size 68, 516, 523: R17 = Reel (1250 pieces) Size 923, 932, 947: B19 = Box (30 pieces) As applicable Ex = AD7 2R870 = 2.87 1R200 = 1.2 10020 = 10 000 R3300 = 0.33 ... Other packaging existing Revison: 05-Aug-13 Document Number: 50011 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000