CCF60 www.vishay.com Vishay Dale Metal Film Resistors, Industrial, ± 1 % Tolerance FEATURES • • • • • Power ratings: 1/2 W, 3/4 W and 1 W at + 70 °C ± 100 ppm/°C temperature coefficient Superior electrical performance Flame retardant epoxy conformal coating Standard 5 band color code marking for ease of identification after mounting • Tape and reel packaging for automatic insertion (52.4 mm inside tape spacing per EIA-296-E) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P70 °C W MAXIMUM WORKING VOLTAGE (1) V TEMPERATURE COEFFICIENT ± ppm/°C TOLERANCE ±% CCF-60 1.0 500 100 1 CCF60 Note • Continuous working voltage shall be RESISTANCE RANGE E-SERIES 10 to 1M 96 P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS PARAMETER Rated Dissipation at 70 °C UNIT CCF60 W 1.0 V 500 Insulation Voltage (1 Min) Veff 500 Dielectric Strength VAC 450 Insulation Resistance 1011 Operating Temperature Range °C - 65 to + 165 Terminal Strength (Pull Test) Ib 2 Weight g 0.75 max. Maximum Working Voltage GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CCF60301RFKR36 (preferred part numbering format) C C F 6 0 3 0 1 R F K GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMPERATURE COEFFICIENT CCF60 R= K = k M = M 10R0 = 10 680K = 680 k 1M00 = 1.0 M F=±1% K = 100 ppm R 3 6 PACKAGING E36 = Lead (Pb)-free, T/R (2500 pieces) R36 = Tin/lead, T/R (2500 pieces) Historical Part Number example: CCF-603010F R36 (will continue to be accepted) CCF-60 3010 F R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544). Revision: 29-Oct-12 Document Number: 31068 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CCF60 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) A E C (Max.) GLOBAL MODEL A B C (Max.) D E 0.344 ± 0.031 (8.74 ± 0.79) 0.139 ± 0.009 (3.53 ± 0.23) 0.400 (10.16) 0.025 ± 0.002 (0.64 ± 0.05) 1.000 ± 0.040 (25.40 ± 1.02) 120 HEAT RISE (°C ABOVE AMBIENT) RATED POWER IN % CCF60 100 80 60 40 20 0 - 65 - 50 25 0 D B 25 DERATING 50 70 75 100 125 150 165 175 200 AMBIENT TEMPERATURE IN °C RESISTANCE VALUES 120 100 80 60 40 20 0 0 0.125 0.25 0.375 0.5 0.625 THERMAL RESISTANCE 0.75 0.875 1 1.125 APPLIED POWER IN W MARKING Vishay Dale model CCF60 is available in the standard 96 resistance values per decade. Values are obtained from the following decade table by multiplying by powers of 10. As an example: 30.1 can represent 30.1 , 301 , 3.01 k, 30.1 k or 301 k. 10.0 14.7 21.5 31.6 46.4 68.1 10.2 15.0 22.1 32.4 47.5 69.8 10.5 15.4 22.6 33.2 48.7 71.5 10.7 15.8 23.2 34.0 49.9 Color code marking with 5 color bands PERFORMANCE POWER RATING AT + 70 °C MAXIMUM R (TYPICAL TEST LOTS) 73.2 CCF60 1/2 W 3/4 W and 1 W 11.0 16.2 23.7 34.8 51.1 75.0 TEST (1) 11.3 16.5 24.3 35.7 52.3 76.8 Thermal Shock ± 0.5 % - ± 0.5 % - 11.5 16.9 24.9 36.5 53.6 78.7 Short Time Overload 11.8 17.4 25.5 37.4 54.9 80.6 Low Temperature Operation ± 0.5 % 82.5 Moisture Resistance ± 1.5 % - ± 0.5 % - 12.1 17.8 26.1 38.3 56.2 12.4 18.2 26.7 39.2 57.6 84.5 Resistance to Soldering Heat 12.7 18.7 27.4 40.2 59.0 86.6 Shock ± 0.5 % 13.0 19.1 28.0 41.2 60.4 88.7 Vibration ± 0.5 % - ± 0.5 % ± 1.0 % 13.3 19.6 28.7 42.2 61.9 90.9 Life 13.7 20.0 29.4 43.2 63.4 93.1 Terminal Strength ± 0.2 % - Dielectric Withstanding Voltage ± 0.5 % - 14.0 20.5 30.1 44.2 64.9 95.3 14.3 21.0 30.9 45.3 66.5 97.6 Note (1) Test methods per MIL-STD-202 Revision: 29-Oct-12 Document Number: 31068 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000