RHY12 www.vishay.com Vishay MCB Analog Displacement Sensor for Mounting in Hydraulic Cylinder FEATURES • Conductive plastic potentiometer technology. Infinite resolution • Precious metal multi-contact wiper • Light alloy profiled support • Wire or connector outputs This sensor is designed to be integrated into a hydraulic cylinder. Due to its small diameter, it can be fitted in the rod of small cylinders. The geometry of the profile and wiper is perfectly suited to operation at an optimum speed under all oil viscosity conditions encountered in the temperature range. QUICK REFERENCE DATA Sensor type LINEAR, conductive plastic Output type Wires and connector Market appliance Dimensions Industrial Diameter 12 mm ELECTRICAL SPECIFICATIONS PARAMETER Theoretical electrical travel (TET) 100 mm to 1000 mm Independent linearity standard ± 0.1 % Independent linearity optional ± 0.05 % Total resistance (Rn) 425 /cm (350 /cm to 4000 /cm optional) Tolerance on Rn ± 20 % Temperature coefficient -300 ± 300 ppm/°C Power rating at +25 °C 0.3 W/cm of travel Power rating at +125 °C 0 W/cm 1 mA Wiper current 1000 Rn Recommended load impedance Dielectric strength 1000 VRMS, 50 Hz, 1 min Insulation resistance 10 G at 500 VCC Output smoothness 0.05 % MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel TET + 1.5 mm 1 N typical Driving force Backlash < 10 μm Maximum displacement speed 1.5 m/s (32 cst oil) PERFORMANCE PARAMETER Operating temperature range -40 °C to +125 °C Storage temperature range -55 °C to +125 °C 20M cycles for TET 300 mm 10M cycles for 300 mm < TET 600 mm 5M cycles for TET > 600 mm Life Operating pressure 350 bar in continuous mode (600 bar at peak) Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 30-Mar-15 Document Number: 32526 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RHY12 www.vishay.com Vishay MCB ORDERING INFORMATION / DESCRIPTION PRHY 12 100 ......... SENSOR TYPE DIAMETER THEORETICAL ELECTRICAL TRAVEL (TET) IN mm (See Electrical Specifications) SPECIAL FEATURE OR OPTION (Plain language) CONNECTIONS Design 1: Standard version with connector inserted in interface flange Design 2: Sensor with wire outputs without sealed feed-through and flange Design 3: Sensor equipped with a sealed feed-through and a wire output cylinder interface flange DIMENSIONS in millimeters DESIGN 1 (STANDARD VERSION) 6 ± 0.3 C C-C 60 °- Ø 24 - 00.3 Ø R0.2 14 26 10 Ø 22 Ø 29.2 + 0.3 0 M26 x 1.5 Snap ring 0 32 - 0.5 on faces 3 0 Ø 11 - 0.1 1.2 ± 0.05 Location of waterproof ring Ø 19 -- 0.2 0.4 M12 x 1 Hirschman connector ELST 400L/12 Washer 12 - 00 .2 C Spring 0 4° Theoritical Electrical Travel (TET) (+ 1 / - 0) Mechanical Travel (CE ) + 3 Electrical zero: 29.5 0 22 - 0.2 TET + 49 max. DESIGN 2 (ON REQUEST) L = TET + 38 (0 / + 0.5) 20 - 0.5 / + 0 Electrical zero Electrical travel (+ 1 / - 0) 3 60° 12 0 2 . -0 Ø 11- 00.1 Ø Max. mechanical travel: TET + 1.5 3 insulated wires g26 length 300 mm CYLINDER ROD BORING Ø 19 + 0.1 0 Ø 12 + 0.2 0 3 Ø 20 + 0.1 0 9 Ø 11 + 0.1 0 Ø 18 M3 x 3 cup HC screw 15 1.1 + 0.05 0 Revision: 30-Mar-15 13 + 0.1 0 Document Number: 32526 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RHY12 www.vishay.com Vishay MCB DIMENSIONS in millimeters DESIGN 3 (ON REQUEST) ELECTRICAL DIAGRAM Green OPTIONS (on request) • Other ohm value (Rn) - see Electrical Specifications • Other linearity - see Electrical Specifications Yellow • Special equipment • Other diameter: 6 mm Red Revision: 30-Mar-15 Document Number: 32526 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000